Gel formation in diimide‐hydrogenated polymers

The hydrogenation of diene‐based polymers via diimide is a very attractive alternative to the conventional catalytic hydrogenation route based on gaseous molecular hydrogen. However, serious crosslinking always accompanies it and limits the end‐use properties of the polymers. Gel formation in polymers that are hydrogenated via diimide has been investigated in detail through an inspection of all the chemical reactions involved in the process. The results indicate that hydrogen peroxide decomposition, some reactions related to oxygen, and the redox reaction between hydrogen peroxide and hydrazine are capable of generating radicals. However, radicals generated in the aqueous phase do not appear to initiate the crosslinking of diene‐based polymers in the latex form. It is proposed that the primary radicals giving rise to crosslinking are generated in the polymer phase in situ, and the step responsible for generating these organic radicals is possibly the diimide disproportionation reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1122–1125, 2005     

Possible use of methylbenzenes as electrolyte additives for improving the overcharge tolerances of Li-ion batteries

Based on the voltammetric behaviour of a series of methyl-substituted benzenes in 1M LiPF₆/EC-DMC electrolyte, xylene was selected and tested as an electrolyte additive for overcharge protection of Li-ion batteries. From the overcharge curves, CV behaviour and SEM observations of the cells in the presence of xylene, it was found that the additive can polymerize at the overcharged voltage to form a dense layer of isolating polymer film at the cathode surface, which blocks off further oxidation of the electroactive material and electrolyte and, therefore, improves the overcharge tolerance of the Li-ion battery. In addition, the xylene additive has shown only a slight influence on the cycling behaviour.     

K_2O－CaO－Al_2O_3－SiO_2系统自释釉瓷化学组成的研究

本文从酸度系数着手，证实了Ｋ２Ｏ－ＣａＯ－Ａｌ４Ｏ久－ＳｉＯ２系统中存在自释釉组成，限定了其组成范围，０．６７％＜Ｋ２Ｏ＜１．２８％，１０．６４％＜ＣａＯ＜１３．６２％，１１．５３％＜Ａｌ４Ｏ３＜１５．３２％，７２．７３％＜ＳｉＯ２＜７４．０４％，并讨论了自释釉瓷的性能。     

Kinetics for benzoylation of sodium 4-acetylphenoxide via third-liquid phase in the phase-transfer catalysis

In this research, the kinetics for synthesizing 4-acetylphenyl benzoate (R^*COOR) from benzoylation of sodium 4-acetylphenoxide via third-liquid phase-transfer catalysis was investigated. The reaction rate was observed to be strongly dependent on agitation speeds in the third-phase catalytic reaction. By forming the third-liquid phase, the observed reaction can be greatly enhanced to give a product yield of 100% in a duration of 3 min at 20 °C and 200 rpm. If a third-liquid phase was not formed in the liquid–liquid system, the reaction rate is very slow and the product yield is only 2% in 3 min at 20 °C. The reaction conducted in third-liquid phase-transfer catalytic system is faster than that in LLPTC system by 25–28 times. The amount of catalytic intermediate (QOR) in the third-liquid phase was about 50% of the catalyst initially added and kept about 30% of it remained after 1 min, and only small amounts of a catalytic intermediate residing in the organic phase were observed during the reaction using methyl t-butyl ether as the solvent. The concentration of catalytic intermediate slightly decreased with increasing reaction time, while the molar ratio of QOR to benzyl tri-n-butylammonium cation in the third-liquid phase remained almost constant after 1 min and increased with increasing agitation speeds. The experimental results were well described by the pseudo-first-order kinetics. The present work shows an effective method to synthesize 4-acetylphenyl benzoate.     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

CS_2中毒法研究Pt-Al_2O_3系催化剂活性中心的性质

本文对金属催化剂活性中心性质提出了新的表征方法,即用活性频率量度活性中心的强度,用原子组合数的概念描述原子组成活性中心的方式,在此基础上提出了活性频率和活性中心原子组合数的计算公式与新的测定方法。 从测出的活性频率和活性中心原于组合数的数据,发现了Pt-Al_2O_3催化剂具有两种活性中心即α和β中心。α中心CS_2的吸附能力比β中心强,但β中心对环己烷的脱氢活性比α中心强。同时证明了不管在α中心或在β中心上环己烷的脱氢反应都是在双位中心上进行的。 本文还考察了锡和铼对铂催化剂性能的影响,实验表明锡和铼都能从结构效应和电子效应方面影响铂的催化性能。     

Raman spectroscopic study of conformational changes in the amorphous phase of poly(lactic acid) during deformation

The conformational distribution change of amorphous poly(lactic acid) (PLA) induced by deformation has been studied using Raman spectroscopy. Spectroscopic features associated with the rotational isomeric states (ttt, ttg′, tg′t, tg′g′) have been established experimentally and supported by normal coordinate analysis. Deformation induced a significant increase in the most favorable tg′t conformation. Based on the relative intensities of Raman-active skeletal modes, a quantitative method has been developed that can be used to elucidate structural changes in a variety of deformed polymer samples. For biaxially oriented PLA films, the overall tg′t conformation increased from the 76% in undeformed sample to a value as high as 92%. The change in conformational distribution in the amorphous phase follows a different trend (76-88%) as compared to the increase in sample crystallinity (0-43%). A large change in amorphous chain conformation occurred at relatively low draw ratios. In contrast, the large change in the degree of crystallinity occurred at higher draw ratios.     

农作物秸秆增强氟石膏复合材料的微观结构研究

将玉米秸秆加入改性后的氟石膏中，研究改性剂、玉米秸秆对氟石膏复合材料结构性能的影响；并用苯丙乳液对玉米秸秆纤维进行表面处理，用以改善基体材料和增强材料的界面结合状况，由此显著提高制品性能。     

Formation of Polymeric Lewis Acid–Lewis Base Complexes with Well-defined Organoboron Polymers

The binding of Lewis bases to organoboron polymeric Lewis acids has been studied and the parameters that determine the complexation equilibrium have been investigated, which include (i) the strength of the individual Lewis acids and Lewis bases, (ii) concentration, and (iii) temperature. While the strongly Lewis acidic borane polymers poly(4-bis(pentafluorophenyl)borylstyrene) (PS-BPf) and poly(4-(di-2-thienylboryl)styrene) (PS-BTh) form isolable complexes with strong Lewis bases such as 4-t-butylpyridine (^tPy), a temperature dependent equilibrium is established with weaker bases such as THF. Similarly, the weakly Lewis acidic boronate polymer poly(4-diethoxyborylstyrene) (PS-BOEt) undergoes a temperature dependent equilibrium with the strong Lewis base 4-dimethylaminopyridine (DMAP), while poly(4-pinacolatoborylstyrene) (PS-BPin) does not significantly bind to pyridine bases. Decomplexation of PS-BTh· ^t Py is achieved by treatment with the stronger Lewis acid, B(C₆F₅)₃, thereby confirming the reversible nature of the polymeric Lewis acid–base adducts. This paper is dedicated to Professor Ian Manners in gratitude of his guidance throughout the years and recognition of his scientific accomplishments     

An alignment-free fingerprint bio-cryptosystem based on modified Voronoi neighbor structures

Bio-cryptography is an emerging security technology which combines cryptography with biometrics. A good bio-cryptosystem is required to protect the privacy of the relevant biometric data as well as achieving high recognition accuracy. Fingerprints have been widely used in bio-cryptosystem design. However, fingerprint uncertainty caused by distortion and rotation during the image capturing process makes it difficult to achieve a high recognition rate in most bio-cryptographic systems. Moreover, most existing bio-cryptosystems rely on the accurate detection of singular points for fingerprint image pre-alignment, which is very hard to achieve, and the image rotation transformation during the alignment process can cause significant singular point deviation and minutiae changes. In this paper, by taking full advantage of local Voronoi neighbor structures (VNSs), e.g. local structural stability and distortion insensitivity, we propose an alignment-free bio-cryptosystem based on fixed-length bit-string representations extracted from modified VNSs, which are rotation- and translation-invariant and distortion robust. The proposed alignment-free bio-cryptosystem is able to provide strong security while achieving good recognition performance. Experimental results in comparison with most existing alignment-free bio-cryptosystems using the publicly-available databases show the validity of the proposed scheme.