Modeling and design of an AC to DC converter

A step-up/down single-phase AC-to-DC power converter without current sensor is proposed to achieve high performance and simple control logic. The power converter adopts a front-end diode rectifier so that only one active switch is required. The familiar state-space averaging technique for discontinuous mode DC-to-DC power converters is extended to model the proposed AC-to-DC converter. Unlike the existing model, which is valid only for a very low frequency range, namely below line frequency, the proposed model is applicable up to half switching frequency. The design of the controller is detailed. Selected experimental results are presented to verify the proposed theory     

Fivefold symmetry in real and reciprocal spaces

Tetrahedrally close-packed structures with juxtaposed pentagonal antiprisms, such as the μ, C14 Laves and the newly found C phases, were studied by means of HREM and SAD. It was found that each bright spot in the structural image corresponds to an antiprism. Differently oriented domains of these phases intergrow frequently with a fairly good match at the interphase boundary. All diffraction patterns of these phases show a fivefold distribution of spot-pairs, and it is shown that this fivefold symmetry comes from the pentagons and spot-pairs from two pentagonal prisms superposed in antisymmetrical positions.     

鄱阳湖湖底沉积物放射性水平

本文报道了1985年鄱阳湖湖底沉积物放射性水平的调查结果。沉积物中 U、Th、~(226)Ra、~(40)(?)和~(137)Cs 的比活度分别为64.8、67.9,58.9、676.1和3.5Bq/kg;用~(137)Cs 测龄方法作了沉积物泥芯垂直深度的年代定位,由此得知1985—1958年对应深度沉积物中 U、Th、~(226)Ra 和~(40)K 的比活度与1957—1930年对应深度沉积物比较无显著性差异;U、Th 和~(226)Ra 的浓集因予分别为5.2×10~413.9×10~4和4.8×10~4L/kg。     

Feature Reduction via Generalized Uncorrelated Linear Discriminant Analysis

High-dimensional data appear in many applications of data mining, machine learning, and bioinformatics. Feature reduction is commonly applied as a preprocessing step to overcome the curse of dimensionality. Uncorrelated Linear Discriminant Analysis (ULDA) was recently proposed for feature reduction. The extracted features via ULDA were shown to be statistically uncorrelated, which is desirable for many applications. In this paper, an algorithm called ULDA/QR is proposed to simplify the previous implementation of ULDA. Then, the ULDA/GSVD algorithm is proposed, based on a novel optimization criterion, to address the singularity problem which occurs in undersampled problems, where the data dimension is larger than the sample size. The criterion used is the regularized version of the one in ULDA/QR. Surprisingly, our theoretical result shows that the solution to ULDA/GSVD is independent of the value of the regularization parameter. Experimental results on various types of data sets are reported to show the effectiveness of the proposed algorithm and to compare it with other commonly used feature reduction algorithms.     

Microstructure investigations of ball milled materials

HREM and FEG TEM were emphasized and extensively used to follow the most subtle changes in the structure and composition of ball-milled Cu, Fe-Cu, and thermally decomposed Fe60Cu40. Some significant results are obtained and summarized as follows: HREM shows that the deformation of ball-milled copper proceeds mainly by twinning and shear bands (SBs) formation. The nano-grains formed during ball milling (BM) contain a high density of dislocations. The grain boundaries (GBs) of nanocrystalline (NC) Cu prepared by BM are ordered, curved, and strained, but disordering, lattice distortion, and nanovoids in local regions were frequently observed. Nanoscale composition analysis on mechanically alloyed Fe16Cu84 shows that the average Fe content in both the interior of grains and the GBs is close to the designed composition, which proves that a supersaturated solid solution has really formed. However, the Fe content is rather inhomogeneous between the larger and smaller grains, which infers the inhomogeneous mixing of Fe and Cu during mechanical alloying (MA). NC structure and the mechanical force-enhanced fast diffusion are the reasons of the formation of supersaturated solid solutions in immiscible systems with positive enthalpy of mixing. HREM observations carried out with the thermally decomposed Fe60Cu40 solid solution show that the Nishiyama (N-W) or Kurdyumov-Sachs (K-S) orientation relationships exist between alpha-Fe and Cu. Energy dispersive X-ray spectra (EDXS) results show that the Cu content in these alpha-Fe grains reaches as high as 9.5 at.% even after heating to 1,400 degrees C, which is even higher than the maximum solubility of Cu in gamma-Fe at 1,094 degrees C.     

MERLIN: a device diagnosis system based on analytic models

An approach to computer-aided interpretation of parametric test data for integrated circuit process-problem diagnosis is presented. In contrast to a conventional expert system, which reasons with a knowledge base consisting of rules acquired from human experts, the system presented centers its knowledge around analytic device equations. By using equations as the basis of the system knowledge, a more universal, well-organized, and concise level of knowledge is encoded. With the use of objects to present this knowledge, a great deal of useful information outside that described by only the symbolic expressions can be represented, and extension to qualitative or numeric models should be straightforward. The result is an expressive, well-organized, easily built, and easily maintained knowledge base. The authors describe the system's interactive graphical displays and the automatic data interpretation algorithms. Examples evaluating n-channel metal oxide semiconductor (NMOS) parameter variations, interconnect parameter variations, and interconnect yields are used for illustration     

Industrial TiO2 based nacreous pigments as functional building materials: Photocatalytic removal of NO

In this paper, the photocatalytic activity of industrial titanium dioxide (TiO₂) based nacreous pigments was researched as functional building materials for photocatalytic NO remove. Three industrial TiO₂ based nacreous pigments were selected to estimate the photocatalytic activity for NO remove. This study is a good proof that pearlescent pigments can eliminate NO, and its performance is positively correlated with its titanium dioxide content. And this research will widen the application of nacreous pigments in functional building materials, and provide a new way to eliminate in door nitric oxide pollution.     

Gel formation in diimide‐hydrogenated polymers

The hydrogenation of diene‐based polymers via diimide is a very attractive alternative to the conventional catalytic hydrogenation route based on gaseous molecular hydrogen. However, serious crosslinking always accompanies it and limits the end‐use properties of the polymers. Gel formation in polymers that are hydrogenated via diimide has been investigated in detail through an inspection of all the chemical reactions involved in the process. The results indicate that hydrogen peroxide decomposition, some reactions related to oxygen, and the redox reaction between hydrogen peroxide and hydrazine are capable of generating radicals. However, radicals generated in the aqueous phase do not appear to initiate the crosslinking of diene‐based polymers in the latex form. It is proposed that the primary radicals giving rise to crosslinking are generated in the polymer phase in situ, and the step responsible for generating these organic radicals is possibly the diimide disproportionation reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1122–1125, 2005