微孔结构对PMI泡沫准静态压缩性能的影响

基于BBC点集建立了聚甲基丙烯酰亚胺(PMI)闭孔泡沫的Kelvin十四面体模型和Laguerre模型,并采用有限元方法研究了其在准静态载荷作用下的压缩性能。分析了孔径大小、泡孔体积离散系数对压缩弹性模量、初始峰值应力和能量吸收能力的影响。结果表明:Kelvin十四面体模型可以较好地预测PMI泡沫的压缩弹性模量和峰值应力;在相同相对密度条件下,小孔径泡沫的初始峰值应力和能量吸收能力均高于大孔径泡沫,而压缩弹性模量则低于大孔径泡沫;随着泡孔体积离散系数的增大,闭孔PMI泡沫压缩弹性模量、初始峰值应力和能量吸收能力均减小。     

汽车轻量化技术:铝/镁合金及其成型技术发展动态

为了推动我国汽车工业轻量化进程,文章从新材料、成型新技术、新应用三个方面对铝合金、镁合金两类轻金属材料的国内外研究动态进行了回顾,分析了两类轻金属材料在汽车工业应用的阻力,提出了我国汽车工业铝/镁合金可能的发展建议。     

Effects of an Inaccurate Sorting Procedure on Optimal Procurement and Production Decisions in a Remanufacturing System

Under the uncertainty of market demand and quality of returns, sorting prior to disassembly is effective for timely obtaining information about the remanufacturability of used products. In this article, we assume that the remanufacturable fraction of used products is a random variable and introduce an inaccurate sorting procedure of used products prior to disassembly. Then, three two-stage optimization models are formulated to maximize the expected profits of a remanufacturer in a single period with used products and/or new parts as inputs to meet the stochastic market demand. Moreover, the article provides a case study to explore the optimal decisions under different scenarios and analyzes the effects of parameters, such as the unit disassembly cost, unit sorting cost, and proportion of sorting errors. Finally, the results indicate that whether remanufacturing with sorting is more profitable than that without sorting mainly depends on the sorting accuracy and the relative value between disassembly cost and sorting cost. When considering or not considering a long lead time of new parts, the effects of sorting errors on procurement policies are different. A long lead time will result in lower expected profits. Finally, the diverse types of classification errors have different influences on procurement policies and corresponding expected profit.     

Time-dependent behavior of layered arches with viscoelastic interlayers

This work studies the time-dependent behavior of a layered arch adhesively bonded by viscoelastic interlayers. The deformation of the viscoelastic interlayer is represented by the Maxwell–Wiechert model. The constitutive relation in an interlayer is simplified through the quasi-elastic approximation approach. The mechanical property of an arch layer is described by the exact two-dimensional (2-D) elasticity theory in polar coordinates. The stress and displacement components in an arch layer, which strictly satisfy the simply supported boundary conditions, have been analytically derived out. The stresses and displacements are efficiently obtained by means of the recursive matrix method for the arch with any number of layers. The comparison study shows that the 2-D finite element solution has good agreement with the present one, while the solution based on the one-dimensional (1-D) Euler–Bernoulli theory has considerable error, especially for thick arches. The influences of geometrical and material parameters on the time-dependent behavior of the layered arch are analyzed in detail.     

Research Advances in Microfiber Humidity Sensors

An overview of the numerous latest research in microfiber humidity sensors is carried out with a specific focus on measurement methods, humidity sensitive materials, probe structures, and sensing properties of different sensors. First, five mainstream measurement structures, including taper, fiber grating, coupler, resonator, and interferometer are reviewed. It is concluded that these measurement structures sense the physicochemical property variations of microfibers or sensitive films and exhibit the change of optical signal when exposed to environment. Second, the basic preparation methods, humidity‐sensing properties, and their advantages and disadvantages as humidity sensitive material are addressed. Then, the advantages and disadvantages of all the above sensing structures are also discussed and compared. Finally, the main existing problems and potential solutions of microfiber humidity sensors are pointed out.     

Natural Plant Materials as Dielectric Layer for Highly Sensitive Flexible Electronic Skin

Nature has long offered human beings with useful materials. Herein, plant materials including flowers and leaves have been directly used as the dielectric material in flexible capacitive electronic skin (e‐skin), which simply consists of a dried flower petal or leaf sandwiched by two flexible electrodes. The plant material is a 3D cell wall network which plays like a compressible metamaterial that elastically collapses upon pressing plus some specific surface structures, and thus the device can sensitively respond to pressure. The device works over a broad‐pressure range from 0.6 Pa to 115 kPa with a maximum sensitivity of 1.54 kPa^?1, and shows high stability over 5000 cyclic pressings or bends. The natural‐material‐based e‐skin has been applied in touch sensing, motion monitoring, gas flow detection, and the spatial distribution of pressure. As the foam‐like structure is ubiquitous in plants, a general strategy for a green, cost‐effective, and scalable approach to make flexible e‐skins is offered here.     

喷雾干燥法制备富锂正极材料及其电化学性能

用喷雾干燥法制备Li_1.2Mn_0.54Ni_0.13Co_0.13O₂富锂正极材料并表征其结构、形貌以及电化学性能,研究了烧结温度对材料电化学性能的影响。结果表明：这种正极材料具有良好的层状结构,一次颗粒粒径为100 nm左右且分布均匀,样品的首次放电比容量为220.2 mAh/g,库伦效率为72.5%,18个循环后容量保持率为96.8%。电化学阻抗和循环伏安特性的测试结果表明,这种正极材料具有良好的电化学性能。     

Pyridine-induced interfacial structural transformation of tetraphenylethylene derivatives investigated by scanning tunneling microscopy

The two-dimensional self-assembly behaviors of tetraphenylethylene (TPE) molecules are significant for further applications, but reports are rare. The self-assembled structures of two C₂-symmetry TPE derivatives (H₄TCPE and H₄ETTC) possessing propeller structures and their stimulus responses to the addition of vinylpyridine derivatives were thoroughly studied with the assistance of scanning tunneling microscopy (STM) technique in combination with density functional theory (DFT) calculations. Although their chemical structures were similar, the H₄TCPE and H₄ETTC molecules self-assembled into closely packed lamellar and quadrilateral structures, respectively, at the 1-heptanoic acid/HOPG interface. After the addition of pyridine derivatives (DPE, PEBP-C4, and PEBP-C8), H₄TCPE and H₄ETTC showed different responsiveness resulting in different co-assembly structures. The results indicated that the structures of pyridine derivatives—including backbones and substituents—affected the intermolecular interactions of both H₄TCPE/pyridine and H₄ETTC/pyridine systems. The modification of the self-assembly behaviors of propeller-shaped H₄TCPE and H₄ETTC would contribute to the construction of more complex multilevel nanostructures.

Open image in new window