Study of partial discharge characteristics at repetitive square voltages based on UHF method

Due to overvoltage produced by inverter output,inverter-fed motor insulation systems often experience fast electrical aging process,especially when partial discharge(PD) is incepted.Before putting into use,the PD detection should be performed on inverter-fed motors at repetitive square voltages to avoid the PD caused insulation deterioration when the motors are collected to inverters having specific characteristics.However,unlike PD tests at AC/DC voltages proposed in IEC 60270,the PD detection at repetitive square voltages is much more complex because of serious interference generated by impulse generator.To solve the problem,ultra-high frequency(UHF) method seems recommendable for its preferable signal-to-noise ratio(SNR).The chief aim of this study is to investigate PD pulse and statistical characteristics of turn-to-turn insulation for inverter-fed traction motors.A square-shaped Archimedes antenna,specially designed for the PD detection at repetitive square voltages of fast rise times,was used to perform PD tests on turn-to-turn insulation models.Time and frequency analysis results indicate that energy component of generator disturbance and PD pulses are mainly distributed in the 0-0.5 GHz and 0.6-1.5 GHz range,respectively.Based on the results,suitable filter was designed for power disturbance suppression.Additionally,resorting to the sensor unit(i.e.antenna and filter) and the PD test system,the PD statistical features at square voltages of different frequencies were obtained.Experimental results show that higher frequency will give rise,statistically,to PD of lower magnitudes distributing at smaller phases.A reasonable interpretation of this phenomenon was presented.Lastly,according to the PD statistical features,some suggestions for the PD detection system design,generator parameter optimization and the PD pulse extracting were given.The results of this work would be beneficial to the increase of the sensitivity when performing the PD detection on insulation systems for inverter-fed motors at repetitive square voltages and thus,improving the reliability of inverter-fed motors.     

有限差分法和隐式龙格库塔法求解Burgers方程

提出一个新的方法求解一维Burgers方程,组合使用有限差分法和隐式龙格库塔法求解Burgers方程。首先使用二阶有限差分法进行空间离散,得到一个常微分方程组,然后使用高阶A稳定的隐式龙格库塔法求解常微分方程组,最后比较数值解和精确解,数值结果证实该方法有很高的精度和稳定性。     

Performance of Sewage Sludge Treatment and Electricity Generation by Different Configuration Microbial Fuel Cells

This paper compared the degradation efficiency of sludge organic matters and electric-production by two typical microbial fuel cells——dual-chamber microbial fuel cell(DMFC)and single chamber air cathode microbial fuel cell(SAMFC),and the variations of sludge protein,polysaccharide and ammonia nitrogen within the systems were also investigated.The results showed that the concentration of sludge soluble chemical oxygen demand,protein and carbohydrate of DMFC are higher than these of SAMFC during the systems operation,while DMFC can achieve a better ammonia nitrogen removal than SAMFC.Under the same operation condition,the stable voltage output of DMFC and SAMFC is 0.61 V and 0.37 V;the maximum power density of DMFC and SAMFC is 2.79 W/m3and 1.25 W/m3;TCOD removal efficiency of DMFC and SAMFC is 34.14%and 28.63%for 12 d,respectively.Meanwhile,DMFC has a higher coulomb efficiency than SAMFC,but both are less than5%.The results showed that DMFC present a better performance on sludge degradation and electric-production.     

Accurate mirror-based camera pose estimation with explicit geometric meanings

An accurate closed form solution is proposed to estimate camera pose by several mirrored reference object images acquired via a planar mirror under different unknown poses. Compared with state-of-the-art methods, our method is more accurate when there are more than three images and has explicit geometric meanings. This method also properly handles cases in which some of the mirror poses are parallel. The central idea is to minimize an error metric based on all reflections of rotation, which enables the camera rotation to be estimated directly by SVD of sum of mirrored camera rotations. After that, the camera translation is computed by solving a large system of linear equations to minimize object space collinearity error. Both synthesized data and real data experiments show the advantages of our approach.     

Model study of IPMC beam electroactive response based on root deformation

Ionic polymer-metal composite (IPMC) is a type of electroactive polymer (EAP). In this paper, based on Nemat-Nasser model, an improved model is developed to explain the initial nonlinear response of electric actuation on the fixed end deformation. Three IPMC strip samples with different surface resistance are chosen for analysis. Further, from simulation and experiment results, it is found that the root deformation made the tip movement of the IPMC strip with little surface resistance, but this effect was less and less when the surface resistance reduced. The calculation results of this model for the fixed end show a more accurate simulation for the actual deformation of IPMC strips.     

不同热边界条件下热管对沥青混凝土换热特性的影响

沥青混凝土在阳光的照射下会迅速升温,影响路面的高温稳定性.热管是一种理想的散热、均热和热能输送元件,可有效降低路面内的升温速率.采用数值模拟方法,建立了沥青混凝土的三维模型,考虑了有、无热管两种情况,对距路面不同深度位置的温度-时间响应特性进行了计算,并分析了路面吸热和放热两种不同热边界条件对换热特性的影响.计算结果表明,在加热过程中,热管会显著降低路表温度,最高降温幅度可达9℃,而且会阻止热量进一步向深层传递;在冷却过程中,热管会加快路表冷却,同时使其周围温度保持较好的均匀度,有助于减小内部应力,提高路面稳定性.     

塑料抗氧剂国外发展近况

本文综述了塑料用抗氧剂的国外发展近况。主要对国外常用受阻酚主抗氧剂的现状、酚类抗氧剂的新品种、辅助抗氧剂亚磷酸酯的新品种、复合抗氧剂的开发情况作了较详细的介绍。     

改性高岭土上甲苯的选择性硝化(IV)

应用Ｍｅｎｋｅ条件，在改性高岭土固体酸催化下，甲苯能被浓硝酸对位选择性硝化，表现在对邻硝化产物比例达到１．５。     

全电动注塑机的特点及应用领域

重点分析了全电动注塑机与全液压注塑机的不同之处,简单地概述了国内塑料工业发展落后的现状以及把我国建成注塑机生产强国的突破口。详细介绍了全电动注塑机的应用领域,并展望了全电动注塑机的发展。     

体制转型与企业文化建设的战略思考

企业文化是企业核心竞争力之所在，处于体制转型过程中的国有企业，一方面要建立合乎市场经济要求的现代企业制度，另一方面要实现企业文化的延续与创新。论述了要在全面把握改革前和改革过渡时期国企的企业文化特征的基础上，正确处理企业文化建设的几个基本关系。