用注凝成型技术制备莫来石陶瓷坯体

用注凝成型技术，通过控制合成莫来石粉料的细度，调节好pH值在单体和交联剂的比例，制备出稳定性好的料浆和强度高的生坯。     

试论电信企业激励机制的改革与创新

本文分析了电信企业面临的社会经济新形势，揭示了在计划经济条件下电信企业内部激励机制存在的弊端，论述了电信企业进行激励机制改革与创新的必要性和必然性，提出了电信企业在生存和发展中改革与创新激励机制的指导思想及原则，提出了如何建立一套科学、合理的激励机制，以便更有效地发挥员工的积极性、主动性和创造性，最大程度地提高激励的效用。     

影响掺矿渣的钢纤维砼强度的主要因素

研究结果表明 :水胶比、胶凝材料用量、钢纤维掺量、矿渣代水泥量对钢纤维砼强度影响显著。当矿渣取代水泥 10 %时 ,钢纤维砼强度最高。经试验选择出一个具有良好和易性和较高强度 (118MPa)的钢纤维砼配合比 ,为掺磨细矿渣的中含量超短异形钢纤维砼的设计和施工提供了试验依据     

中国铁通企业信息化战略规划和措施

首先简单回顾了中国铁通成立之初计费管理系统的一期建设和二期扩容后支撑能力的明显不足,以及信息化建设初期各部门独立IT系统运行中的问题,然后较详细介绍了企业信息化规划的整体思路.包括业务系统和流程、组织和业务流程重组、信息技术战略和架构等.并在实践的基础上,列举了信息化系统实施过程中应避免的做法和应注意的事项.     

索风营水电站主要工程地质问题及勘测技术

索风营水电站因工程区喀斯特水文地质条件复杂,松散堆积体、危岩体、滑坡等不良地质体分布广泛,断裂、褶皱极为发育,故岩体连续性及完整性差,从而带来水库渗漏、枢纽区边坡稳定、库首渗漏、地下洞室喀斯特涌水涌泥、围岩稳定、软弱地基等一系列的工程地质问题,在乌江流域水电开发建设过程中具有代表性和典型性。本文从勘测、分析评价及工程处理等方面对该电站各种工程地质问题进行了总结。     

Preparation and photochromism of nanocomposite thin film based on polyoxometalate and polyethyleneglycol

A photochromic nanocomposite based on Keggin structure phosphomolybdic acid (PMoA) well dispersed in polyethyleneglycol (PEG) was fabricated. TEM image showed that PMoA nanoparticles with narrow size distribution were finely dispersed in polymer matrix. FT-IR results showed that the Keggin geometry of polyoxometalates was still preserved inside the composites and strong coulombic interaction was built between PMoA and polymer matrix. Under UV irradiation, the film was reduced photochemically to yield a blue species, which was in accordance with a charge-transfer mechanism.     

软交换技术的发展及其应用

软交换是下一代网络NGN的核心技术，本文从软交换的概念入手，介绍了软交换的基本功能及其优点．软交换的网络系统结构、软交换的对外接口等内容，并探讨了软交换技术的应用。     

爆震室内混合物填充特性研究

爆震室内混合物的填充过程是PDE工作循环中的重要一环.为了研究爆震室内的燃料和氧化剂的填充特性,采用大型计算流体力学仿真软件对爆震室内燃料和空气的填充过程进行了数值模拟.计算结果表明,在设定的计算条件下,填充距离随填充时间的增加近似线形增大,填充完毕所需的填充时间约0.125s,且从距封闭端250mm开始,填充后的乙炔质量分数稳定在0.11.     

A new distributed approximation algorithm for constructing minimum connected dominating set in wireless ad hoc networks

In recent years, constructing a virtual backbone by nodes in a connected dominating set (CDS) has been proposed to improve the performance of ad hoc wireless networks. In general, a dominating set satisfies that every vertex in the graph is either in the set or adjacent to a vertex in the set. A CDS is a dominating set that also induces a connected sub‐graph. However, finding the minimum connected dominating set (MCDS) is a well‐known NP‐hard problem in graph theory. Approximation algorithms for MCDS have been proposed in the literature. Most of these algorithms suffer from a poor approximation ratio, and from high time complexity and message complexity. In this paper, we present a new distributed approximation algorithm that constructs a MCDS for wireless ad hoc networks based on a maximal independent set (MIS). Our algorithm, which is fully localized, has a constant approximation ratio, and O(n) time and O(n) message complexity. In this algorithm, each node only requires the knowledge of its one‐hop neighbours and there is only one shortest path connecting two dominators that are at most three hops away. We not only give theoretical performance analysis for our algorithm, but also conduct extensive simulation to compare our algorithm with other algorithms in the literature. Simulation results and theoretical analysis show that our algorithm has better efficiency and performance than others. Copyright © 2005 John Wiley & Sons, Ltd.     

Effects of surfactant/silica and silica/cerium ratios on the characteristics of mesoporous Ce-MCM-41

Using the surfactant CTMABr (cetyltrimethyl ammonium bromide) and cerium(IV) sulfate, mesoporous Ce-MCM-41 molecular sieves were produced under a hydrothermal condition with various surfactant/silica (surfactant/Si) and silica/cerium (Si/Ce) ratios. Changes to the structural traits caused by changing the molar ratios of both surfactant/Si and Si/Ce were investigated. XRD (X-ray diffraction), FT-IR (fourier transform infrared spectroscopy), and SEM (scanning electro microscopy) were used for the characterization of prepared mesoporous samples. Among the tested molar ratios, surfactant/Si ratio of 0.5 and 0.2 showed highest values of d_1 0 0 and intensity, respectively, for the Si-MCM-41. XRD analysis also identified a quintessential hexagonal structure of Ce-MCM-41 for the Si/Ce molar ratio higher than 40 (maintaining the surfactant/Si ratio at 0.2). When cerium content was increased to have the Si/Ce molar ratio of 20, the hexagonal structure of Ce-MCM-41 was collapsed due to the structural stress of substituted cerium. FT-IR results confirmed calcination of Ce-MCM-41 and the incorporation of Ce⁴⁺ ions of cerium sulfate into the silica surface with proper removal of the surfactant. Rod-like shape with rounded edges of the prepared Ce-MCM-41 samples was identified by SEM. These results suggest surfactant/Si ratio of 0.2 and Si/Ce ratio of 40 for the production of Ce-MCM-41 with the highest level of crystallinity.