乙二醇合成工艺的研究进展

对国内外乙二醇合成的传统工艺:直接水合法、催化水合法和碳酸乙烯酯法进行了介绍;对乙二醇合成的新工艺,包括乙二醇和碳酸二甲酯联产法和C1化学法的工艺流程和发展前景进行了综述,其中,C1化学法主要分为乙烯合成法、合成气合成法和甲醛、甲醇合成法。作为合成气合成法之一的合成气偶联合成法,具有工艺要求不高、反应条件温和等优点,是目前最有希望大规模工业化生产乙二醇的工艺路线。     

A steering procedure for the fast vertex fitting method

The fast vertex fitting method [P. Billoir and S. Qian, Nucl. Instr. and Meth. A 311 (1992) 139] has been enhanced by a steering procedure which performs the track selection to insure the vertex fitting quality. Meanwhile, a sign error in a formula in the above publication has been corrected.     

3mm波段极近距离雷达

提出一种极近距离雷达概念，并导出其作用距离公式，在此基础上研制出一台３ｍｍ波段极近距离多普勒雷达样机．试验结果表明该雷达结构简单，成本低廉，在作用距离为零点几米至几米范围内可获得较高的定距精度．     

��Ȼ���ƺϳ��ͽ���

天然气制合成油得到的柴油燃料基本不含硫和芳烃 ,费—托法合成技术的进步已使天然气制合成油(GTL)的生产成本可与 18～ 2 2美元 /桶的原油价格相竞争 ,因而GTL已成为天然气 ,尤其是偏远地区天然气高效利用的一个有前景的途径。GTL技术由合成气生产、费—托合成和产品精制三部分组成。GTL的工艺方案有埃克森公司AGC - 2 1工艺、壳牌公司SMDS工艺、萨索尔公司Synthol工艺、合成油公司工艺等。GTL技术在合成气生产和费托合成方面还出现了一些新的进展。 2 1世纪将迎来GTL装置新的发展期 ,在未来 15年内 ,预计GTL装置生产能力将增加 (45 0 0～ 6 75 0 )× 10 4 t/a。 2 0 0 5年前将有 7套GTL装置投运 ,总能力 880× 10 4 t/a。     

上市公司2001年业绩及前景

介绍了新闻纸、文化用纸有包装用纸上市公司2001年的主要业绩并对其发展前景作了分析。     

Comparisons of PWM and one-cycle control for power amplifier with multilevel converter

Based on the concepts of cascade multilevel converters and one-cycle technique, comparisons are conducted to characterize the distortion of the pulsewidth modulation (PWM) and one-cycle control methods that were applied to converters. Simulation results for the different control schemes are obtained in PSIM software initially to see the effect of one-cycle control different from that of PWM control. Through the comparisons, the advantages and disadvantages are identified for each method. The one-cycle scheme is better than PWM control in reducing undesirable harmonics and tracing dynamic waveforms. Simulation and experimental results are also provided to verify the conclusions.     

Effect of quercetin on chemiluminescence of human platelets induced by arachidonic acid

Arachidonic acid (AA)-induced platelet chemiluminescence (CL) was measured with a lumiphotometer. Quercetin remarkably inhibited the CL, the IC50 of quercetin was 3 mumol.L-1. When quercetin plus aspirin, which inhibits only cyclooxygenase, was added, the inhibitory rate of platelet-CL obviously increased (P < 0.01). On the other hand, the quercetin had a scavenging effect on superoxide anion radical using alkaline sodium dithionite solution generation. The IC50 was 20.9 mumol.L-1. In addition, superoxide dismutase of 0.1 mg.ml-1 inhibited the platelet-CL by 97.8%, while mannitol, a hydroxyl radical scavenger, only by 43.3% at a concentration of 80 mg.ml-1. These results suggest that the mechanism of the inhibiting AA-induced platelet-CL by quercetin was associated with scavenging the superoxide anion radical directly and with inhibiting the cyclooxygenase.     

Characterization of mutated transforming growth factor-beta s which possess unique biological properties

Transforming growth factor-beta (TGF-beta) is a potent regulator of cell growth and differentiation. On the basis of the crystal structure of TGF-beta 2, we have designed and synthesized two mutant TGF-beta s, TGF-beta 1 (71 Trp) and TGF-beta 1 (delta 69-73). Although both of these molecules inhibited the growth of Mv1Lu mink lung epithelial cells and LS1034 colorectal cancer cells, which are affected equally by TGF-beta 1 and TGF-beta 2, TGF-beta 1 (delta 69-73) was much less potent than TGF-beta 1 or TGF-beta 1 (71 Trp) at inhibiting the growth of LS513 colorectal cancer cells which are growth-inhibited by TGF-beta 1 but not TGF-beta 2. Both TGF-beta 1 (71 Trp) and TGF-beta 1 (delta 69-73) increased levels of mRNAs for fibronectin and plasminogen activator inhibitor with Mv1Lu cells, whereas only TGF-beta 1 (71 Trp) and not TGF-beta 1 (delta 69-73) up-regulated the mRNA level of carcinoembryonic antigen in LS513 cells. The expression level of carcinoembryonic antigen mRNA in LS1034 cells was not altered by either wild-type or mutant TGF-beta s. Receptor labeling experiments demonstrated that TGF-beta 1 (71 Trp) bound with high affinity to the cell-surface receptors of Mv1Lu, LS1034, and LS513 cells while TGF-beta 1 (delta 69-73) bound effectively to the receptors of Mv1Lu and LS1034 cells but much less to the receptors on LS513 cells.(ABSTRACT TRUNCATED AT 250 WORDS)     

Call control and traffic transport for connection-oriented highspeed wireless personal communications over metropolitan area networks

A distributed circuit-switched approach for supporting the deployment of high speed wireless personal communication services in urban areas through the interconnection of base stations via metropolitan area networks (MANs) is proposed. Broadband MANs minimize traffic congestion by dynamic sharing of link capacity and by serving as distributed switches for partitioning call control functions. While the DQDB protocol readily supports distributed packet-switching over the IEEE 802.6 MAN, isochronous traffic such as voice and video is best supported by circuit-switched connections. The authors present an enhanced bi-state pre-arbitrated (PA) transport mechanism, and associated call control and handoff management techniques, which enable distributed circuit-switching over the MAN. These capabilities are not currently addressed in the 802.6 standards. The bi-state PA transport mechanism facilitates statistical multiplexing of variable rate isochronous traffic sources. The network capacity is constrained by the call setup delay performance, and is analyzed by simulations. Alternative signaling architectures, involving different placements of call control network elements, are evaluated. The effects of erasure nodes, and close bus versus open bus architectures, are considered. The overlap inter-MAN call setup procedure is proposed to reduce delays. Different call handoff procedures are formulated according to the type of handoff and the resulting change in call connectivity. Most handoffs are intra-MAN, requiring simple procedures with short delays     

厌氧胶快速渗补技术在汽车发动机上的应用

将金属铜易与过氧化物发生氧化还原反应生成游离基的原理应用于厌氧胶，开发了针时金属零件表面微孔进行局部渗补的实用技术。在相关技术可靠性和工艺可行性得以论证的前提下。将局部渗补技术成功地应用于渗补发动机泄漏缸盖，减少了废品损失，取得了良好的经济效益。