基于CAN总线的连铸结晶器振动控制器设计

针对结晶器振动控制器数据传输量大、工作可靠性要求高等特点,设计了1种基于CAN总线和STM32F407单片机的结晶器振动控制器.控制器主要实现振动波形产生、位移数据采集、控制信号输出和监控上位机通信等功能.实验表明:该结晶器振动控制器工作可靠、性能稳定、数据传输速率高、成本低廉,具有较高的实用价值.     

电力远程费控系统功能在线检测技术研究

介绍了电力远程费控系统的主要功能和优缺点,对电力远程费控系统的主要检测内容进行了分析,并在此基础上提出了电力远程费控系统的检测技术,将检测阶段分为投产前和投产后,把好投产前检测关,投产后利用在线检测方法及时掌握系统的运行状态.     

基于有限元方法的CeCl3和NdCl3在LiCl-KCl熔盐中的电极动力学模拟

充分理解锕系元素和镧系元素在熔盐中的行为和性质是实现反应堆乏燃料熔盐电解后处理的关键,然而熔盐电解实验所需的高温环境、腐蚀性熔盐甚至放射性物质等条件限制了实验的广泛开展。为寻求一种低成本且可靠的获取元素在熔盐中性质的途径,采用有限元方法在不同温度下模拟了不同浓度的三氯化铈和三氯化钕在LiCl-KCl熔盐中的循环伏安曲线,并与实验数据做了对比。结果表明,有限元方法能够较为准确地反映实际电化学过程,继而为乏燃料熔盐电解后处理提供数据支持。     

Machine Learning Reduced Gene/Non-Coding RNA Features That Classify Schizophrenia Patients Accurately and Highlight Insightful Gene Clusters

RNA-seq has been a powerful method to detect the differentially expressed genes/long non-coding RNAs (lncRNAs) in schizophrenia (SCZ) patients; however, due to overfitting problems differentially expressed targets (DETs) cannot be used properly as biomarkers. This study used machine learning to reduce gene/non-coding RNA features. Dorsolateral prefrontal cortex (dlpfc) RNA-seq data from 254 individuals was obtained from the CommonMind consortium. The average predictive accuracy for SCZ patients was 67% based on coding genes, and 96% based on long non-coding RNAs (lncRNAs). Machine learning is a powerful algorithm to reduce functional biomarkers in SCZ patients. The lncRNAs capture the characteristics of SCZ tissue more accurately than mRNA as the former regulate every level of gene expression, not limited to mRNA levels.     

Effect and Evolution of Oxide Film in the HDH-Ti Powder Surface on Densification Behavior During Sintering

Metallurgical and Materials Transactions A - In this work, we used hydride-dehydride Ti (HDH-Ti) powders (with the oxygen levels of 0.17 and 0.51 wt pct, respectively) combined with microstructural...     

Tensile behavior change depending on the varying tungsten content of W–Ni–Fe alloys

Tungsten heavy alloys (WHAs) are metal–metal composites consisting of nearly pure spherical tungsten particles embedded in a Ni–Fe–W or Ni–Co–W or Ni–Cu–W ductile matrix. In this dual phase alloy, there are several complicated relations between the ductile matrix and hard tungsten particles. The aim of this research was to examine the effect of varying tungsten content on the microstructure and mechanical properties of tungsten heavy alloys. The microstructural parameters (grain size, connectivity, contiguity and solid volume fraction) were measured and were found to have a significant effect on the mechanical properties of tungsten-based heavy alloys. The result shows that the binding strength between the W and the matrix phase has a major influence on the ductility of tungsten-based alloys. The larger this binding force is, the better the ductility is.     

金属粉末注射成形技术的最新研究动态与发展趋势

简要阐述了粉末注射成形技术的特点与应用 ,并从粉末的制备、粘结剂体系的设计、注射成形过程及其计算机模拟等几个方面阐明了粉末注射成形技术的最新研究动态 ,最后提出了粉末注射成形技术的重要发展趋势     

基于演化算法的复杂机械广义优化设计实现策略研究

针对复杂机械广义优化设计过程中优化模型不易获得这一难题，利用人工神经网络的高度非线性是非线性映射能力，将优化建模转换为求取设计变量到设计方案的映射关系，构建了复杂机械广义优化柔性建模方法；引入模糊评价理论，设计了基于演化计算的优化方法，给出了优化流程图。该策略特别适用于复杂机械概念设计阶段的方案优化。     

注射坯成形质量与尺寸精度的控制模型

注射坯的尺寸精度反映注射坯质量的好坏，并对控制其后脱脂和烧结过程缺陷和最终产品尺寸精度起着很关键的作用。文章基于烧结收缩各向同性的前提下，提出了通过注射坯质量偏差控制注射坯尺寸精度和注射坯质量的数学模型，并在实验中验证了这一模型的正确性。     

矿山磨光球用钢XK5159H的生产试制

XK5159H钢连铸连轧棒材用于制造矿山磨光球，对于钢的纯净度、低倍组织、探伤结果及DI值等均有严格的要求，很难控制。我们通过制定内控化学成分及合理的工艺路线，使生产试制一次成功。