Premature separation of centromere and aneuploidy: an indicator of high risk in unaffected individuals from familial breast cancer families?

OBJECTIVES: Injury is the leading cause of death in the male working population of Brazil. An important fraction of these deaths are work related. Very few cohort studies of steel workers, and none from developing countries, have reported on mortality from injuries. This paper analyses mortality from work and non-work related injuries among Brazilian steel workers. METHODS: Deaths during employment from 1 January 1977 to 30 November 1992 were analysed in a cohort of 21,816 male steel workers. Mortality rates specific for age and calendar year among the workers were compared with those of the male population of the state where the plant is located. Work related injuries were analysed by comparing the mortality rates for different subgroups of the cohort. RESULTS: The number of deaths (391) was less than half that expected based on death rates of the general population. Over 60% (242) of deaths were due to injuries. Mortality from most causes was substantially below that in the general population, but that from unintentional injury, was 50% above that of the general population. Standardised mortality ratios (SMRs) were highest for the youngest and the oldest employees and for labourers and clerical workers. Mortality from motor vehicle injury was twice that expected from population rates (SMR = 209, 95% confidence interval (95% CI) 176-244). There was a 67% fall in the age adjusted mortality from occupational injuries in the study period. CONCLUSION: The healthy worker effect in this cohort was greater than that commonly found in studies of occupational groups in developed countries, probably because of a greater socioeconomic gap between employed and unemployed populations in Brazil, and unequal distribution of health care resources. Mortality was especially high for motor vehicle injuries. The fall in mortality from occupational injuries during the study period was probably due to improvement in safety standards, increased automation, and better medical care. There is a need to investigate risk factors for unintentional injuries among steel workers, especially those due to motor vehicle injuries. Prevention of occupational and nonoccupational injuries should be a main priority in Brazil.     

PMR1, a Ca2+-ATPase in yeast Golgi, has properties distinct from sarco/endoplasmic reticulum and plasma membrane calcium pumps

PMR1, a P-type ATPase cloned from the yeast Saccharomyces cerevisiae, was previously localized to the Golgi, and shown to be required for normal secretory processes (Antebi, A., and Fink, G.R. (1992) Mol. Biol. Cell 3, 633-654). We provide biochemical evidence that PMR1 is a Ca2+-transporting ATPase in the Golgi, a hitherto unusual location for a Ca2+ pump. As a starting point for structure-function analysis using a mutagenic approach, we used the strong and inducible heat shock promoter to direct high level expression of PMR1 from a multicopy plasmid. Yeast lysates were separated on sucrose density gradients, and fractions assayed for organellar markers. PMR1 is found in fractions containing the Golgi marker guanosine diphosphatase, and is associated with an ATP-dependent, protonophore-insensitive 45Ca2+ uptake activity. This activity is virtually abolished in the absence of the expression plasmid. Furthermore, replacement of the active site aspartate within the phosphorylation domain had the expected effect of abolishing Ca2+ transport activity entirely. Interestingly, the mutant enzymes (Asp-371 --> Glu and Asp-371 --> Asn) demonstrated proper targeting to the Golgi, unlike analogous mutations in the related yeast H+-ATPase. Detailed characterization of calcium transport by PMR1 showed that sensitivity to inhibitors (vanadate, thapsigargin, and cyclopiazonic acid) and affinity for substrates (MgATP and Ca2+) were different from the previously characterized sarco/endoplasmic reticulum and plasma membrane Ca2+-ATPases. PMR1 therefore represents a new and distinct P-type Ca2+-ATPase. Because close homologs of PMR1 have been cloned from rat and other organisms, we suggest that Ca2+-ATPases in the Golgi will form a discrete subgroup that are important for functioning of the secretory pathway.     

Computational study of unsteady viscous flow around a transversely and longitudinally oscillating circular cylinder in a uniform flow at high reynolls numbers

A finite difference simulation method for the time dependent viscous incompressible flow around a transversely and longitudinally oscillating circular cylinder at Reynolds numbers of Re=4×10³ and 4×10⁴ is presented. The Navier-Stokes equations in finite difference form are solved on a moving grid system, based on a time dependent coordinate transformation. Solution of the vortex street development behind the cylinder is obtained when the cylinder remains stationary and also when it is oscillating. Time eholution of the flow configuration is studied by means of stream lines, pressure contours and vorticity contours. The computer results predict the lock-in phenomenon which occurs when the oscillation frequency is close to the vortex shedding frequency in the transverse mode or around double the vortex shedding frequency in the longitudinal mode. The time dependent lift and drag coefficients are obtained by the integration of the pressure and shear forces around the body. The drag, lift and the displacement relations are also discussed.     

Reconstruction of cervical stability following old facet dislocation of cervical spine]

One hundred fifty adolescent inpatients with major depression were systematically assessed for demographic and clinical differences between psychotic and nonpsychotic depression. Delusions and/or hallucinations were present in 10% of the subjects. The psychotic group had significantly more frequent and severe suicidal ideation. Posttraumatic stress disorder was also more frequent in the psychotic group.     

Refurbishment and safety upgradation of research reactor Cirus

Cirus, a 40 MW t, vertical tank type research reactor, having wide range of research facilities, was commissioned in the year 1960. This research reactor, situated at Mumbai, India has been operated and utilized extensively for isotope production, material testing and neutron beam research for nearly four decades. With a view to assess the residual life of the reactor, detailed ageing studies were carried out during the early 1990s. Based on these studies, refurbishment of Cirus for its life extension was taken up. During refurbishment, additional safety features were incorporated in various systems to qualify them for the current safety standards. This paper gives the details of the operating experiences, utilization of the reactor along with methodologies followed for carrying out detailed ageing studies, refurbishment and safety upgradation for its life extension.     

岩金矿山空区处理研究

文章阐述了岩金矿山空区处理研究的手段及空区处理的方法，探讨了空区破坏的地质，力学机理。     

Integrated distributed intelligent system for process-control system design

In process-control system design, the Computer Aided Design (CAD) techniques have evolved a new generation of design techniques. This also paves the way for implementing Computer Integrated Manufacturing Systems (CIMS). However, the key issue to accomplishing the objectives in CAD is the automation of conceptual design. This paper first introduces the fundamentals of conceptual design for process-control system design. Then, a strategy to solve the problems in conceptual design is proposed. The associated system configuration and software implementation platform for developing intelligent systems for process control system design are presented. Finally, an application case is studied.     

DX centers in AlxGa1-xAs bulk alloy,AlAs/GaAs ordered,and disordered superlattices

Properties of theDX centers in Al_0.5Ga_0.5As bulk alloy (b-AL), (AlAs)₂ (GaSa)₂ ordered superlattice (o-SL) and (AlAs) _m (GaAs) _n disordered superlattice (d-SL) (m = 1, 2, 3,n = 1, 2, 3) with the same macroscopic composition were measured and compared. By deconvolution of deep level transient spectroscopy (DLTS) spectrum due to theDX center, we have found a decrease in the number of separate peaks in DLTS spectrum in an intentionally atomic ordered arrangement. Visiting Scholar of the Japan Society for the Promotion of Science. On leave from Department of Electrical Engineering, San Jose State University, San Jose, California 95192-0084, USA.     

Transient scattering by conducting cylinders-TE case

Transient scattering (transverse electric case) by two-dimensional cylinders, both open and closed, is investigated using the marching-on-in-time technique. A simple averaging scheme is also presented to control the late-time oscillations. Numerical results are presented for certain representative geometries and compared with inverse Fourier transform techniques. Good agreement is noted in each case     

Microwave-Assisted Synthesis of Fine Particle Oxides Employing Wet Redox Mixtures

Interaction of electromagnetic radiation with a physical mixture of metal nitrates and amides/hydrazides is observed to initiate high-temperature reactions, useful for realizing several high-temperature ceramic materials. A judicious choice of such redox mixtures undergoes exothermic reactions when they couple with microwave radiation. The coupling of electromagnetic radiation with metal salts and amides/hydrazides depends on the dielectric properties of the individual components in the reaction mixture. The approach has been used to prepare γ-Fe₂O₃, Fe₃O₄, MgCr₂O₄, α-CaCr₂O₄, and La_0.7Ba_0.3MnO₃.