Speed superiority of scaled double-gate CMOS

Unloaded ring-oscillator simulations, performed with a generic process/physics-based compact model for double-gate (DG) MOSFETs and supplemented with model-predicted on-state currents and gate capacitances for varying supply voltages (V_DD), are used to show and explain the speed superiority of extremely scaled DG CMOS over the single-gate (e.g., bulk-Si) counterpart. The DG superiority for unloaded circuits is most substantive for low V_DD < ~1 V     

水泥生产中预加水成球微机控制系统

叙述水泥生产中以ＳＴＤ８０９８微机系统为核心组成的生料预加水成球控制系统的构成、工作原理及软件结构。该系统目前已在云阳钢铁厂水泥分厂投入使用，效果良好，成球合格率在９０％以上。     

利用地理信息系统ARC/INFO计算地物面积的方法

详细介绍利用地理信息系统工具ARC/lNFO来计算地物分布专题图中各种不同地物面积的方法，并给出海南省大边河库区地物面积的计算实例。     

烃源岩热解油的轻烃单体和正构烷烃分子碳同位素特征

采用最新引进的国际八十年代后期开发的GC-deltas气体同位素质谱仪,对几类典型烃源岩的热模拟液态烃产物-热解油进行了GC/C/MS在线(Online)碳同位素分析,获得了有关轻烃单体、正构烷烃及姥鲛烷、植烷分子的碳同位素组成数据.分析资料表明,轻烃单体、正构烷烃及姥鲛烷、植烷的碳同位素特征及分布模式能够有效地反映烃源岩的特征-母质类型、沉积环境及热成熟度等.     

胃肠道激光内镜应用技术

本文结合作者的体验和文献，详细介绍了激光光导纤维检查与准备，激光内镜在胃肠道疾病应用的技巧、方法和注意事项等，可为临床医生和相关技术人员提供帮助。     

电潜泵中压变频调速系统的改进

电潜泵中压变频器输出端产生高次谐波和脉冲电流 ,对电潜泵电动机的绝缘性能和轴承寿命造成不利影响。为此 ,提出 3项改进对策 :①采用谐振软性开关逆变电路 ,使功率开关器件在零电压条件下导通 ;②在变频器逆变输出端设置电抗滤波器抑制高次谐波电流 ;③改变电动机内部结构 ,如加大定子槽宽 ,增加转子导条尺寸 ,变星接法为星 角接法 ,采用绝缘轴承等。实践证明 ,采取改进对策后 ,不仅提高了电潜泵的产量 ,而且变频器滤波后电动机端的过电压明显减小 ,电潜泵和电缆的寿命延长     

煤层物性测井评价方法初探

依据煤岩的赋存方式和结构特点，利用电阻率和井径测井资料在不同煤质结构的煤层所表现的差异性，建立了2个指标(即深侧向电阻率与微球电阻率之间的比值，井径与钻头之间的比值)对煤质结构进行了准确的识别。用多元回归的概率模型建立了煤岩镜质反射率的测井计算模式，其结果与已有的煤心分析数据对比，两者具有较好的一致性。在综合分析的基础上，对煤层的重要物性参数煤阶、煤质结构进行了测井评价。     

Fabrication of multi-walled carbon nanotube reinforced polyelectrolyte hollow nanofibers by electrospinning

Hybrid hollow multi-walled carbon nanotubes (MWCNTs)/polyelectrolytes (PE) nanofibers were prepared by a combination of the electrospinning method and layer-by-layer (LbL) technique. The mixed polystyrene (PS)/MWCNTs nanofibers were obtained by electrospinning method, which were employed as templates to self-assembly multilayered polyelectrolytes by LbL technique. Hollow MWCNTs/PE nanofibers were obtained by selectively removed part of the template: PS, which is confirmed by Raman spectra, transmission electron microscopy (TEM) and scanning electron microscopy (SEM).     

Vibration cavitation behaviour of selected Ni-Mn-Ga alloys

Vibration cavitation erosion tests were carried out on Ni-Mn-Ga alloys of three different crystal structures: (1) the cubic austenite, (2) the non-modulated tetragonal martensite (T) and (3) the five-layered martensite (5M). All Ni-Mn-Ga alloys exhibited cavitation behaviour characterized by a step-wise curve of mass loss versus test time. This behaviour is correlated to the microstructural nature of the alloys as well as the surface conditions of the pre-test samples. The type and concentration of the defects at the surfaces were critical to the cavitation resistance of the alloys. The best cavitation resistant alloy was of a cubic austenitic structure, followed with the alloy of a tetragonal T-martensite. The largest material loss was found in the alloy with a 5M martensite. All the studied Ni-Mn-Ga alloys had an excellent cavitation resistance compared to that of the reference stainless steel, and they even excelled some NiTi alloys found in literature. This may be due to the superelasticity of the cubic austenite and the twinning of the martensitic phases.     

煤系高岭土制备裂化催化剂的探索性研究

从石嘴山煤系高岭土的分析测实,经过改性处理,实验后得出具有碱改性条件,且制备裂化催化剂后重油转化能力有明显提高,开拓了煤系高岭土在石化领域的应用。