Hierarchical Magnetic Network Constructed by CoFe Nanoparticles Suspended Within “Tubes on Rods” Matrix Toward Enhanced Microwave Absorption

Hierarchical magnetic-dielectric composites are promising functional materials with prospective applications in microwave absorption(MA)field.Herein,a three-dimension hierarchical“nanotubes on microrods,”core–shell magnetic metal–carbon composite is rationally constructed for the first time via a fast metal–organic frameworksbased ligand exchange strategy followed by a carbonization treatment with melamine.Abundant magnetic CoFe nanoparticles are embedded within one-dimensional graphitized carbon/carbon nanotubes supported on micro-scale Mo2N rod(Mo2N@CoFe@C/CNT),constructing a special multi-dimension hierarchical MA material.Ligand exchange reaction is found to determine the formation of hierarchical magnetic-dielectric composite,which is assembled by dielectric Mo2N as core and spatially dispersed CoFe nanoparticles within C/CNTs as shell.Mo2N@CoFe@C/CNT composites exhibit superior MA performance with maximum reflection loss of−53.5 dB at 2 mm thickness and show a broad effective absorption bandwidth of 5.0 GHz.The Mo2N@CoFe@C/CNT composites hold the following advantages:(1)hierarchical core–shell structure offers plentiful of heterojunction interfaces and triggers interfacial polarization,(2)unique electronic migration/hop paths in the graphitized C/CNTs and Mo2N rod facilitate conductive loss,(3)highly dispersed magnetic CoFe nanoparticles within“tubes on rods”matrix build multi-scale magnetic coupling network and reinforce magnetic response capability,confirmed by the off-axis electron holography.     

类金刚石薄膜的Raman光谱分析及红外光谱特性

用酒精和氢气的混合气体为工作气体 ,在不同的酒精浓度下 (1 0 % ,1 5% ,2 0 % )下利用微波等离子体化学气相沉积法在较低温度下 (450～ 50 0℃ )以单晶硅为衬底制备出类金刚石薄膜样品。 Raman光谱分析了酒精浓度对薄膜中金刚石成份的含量的影响。红外光谱分析表明薄膜的红外光透过率与薄膜的表面形貌、薄膜结构有关。酒精浓度为 1 0 %时得到的金刚石薄膜的红外光透过率最高 ,达到 62～ 72 % ,同时透过率曲线因薄膜干涉而引起的振荡也最为显著。     

莫斯科中国贸易中心工程防止结构连续倒塌设计

建筑抗倒塌问题近年来在欧美国家得到广泛关注。结合莫斯科中国贸易中心工程的防止结构连续倒塌设计,比较了国外一些相关设计规范和标准之间的相互关系,提出满足俄罗斯规范要求的防止连续倒塌设计计算方法,并将其与正常情况下的结构计算进行比较,找出其中带规律性的问题。     

方位-多普勒频率合成TMA的可测性分析

应用了非线性系统可测性理论对方位频率TMA的可测性进行了分析.结果表明,三维情况下在方位角和高低角的变化率满足不全为零条件时,载机不必做机动就可以实现可测.     

互相关分析中有偏估计与无偏估计的比较

本文通过理论分析和Matlab仿真得出.周期信号需采用有偏估计,且要求延迟时间小于信号周期;非周期信号中,对于局部峰值点和周期变化较小的一类准周期信号,有偏估计要求延迟时间小于信号近似周期,无偏估计对延迟时间的大小没有要求,但抗干扰能力较差.对于冲击信号,有偏估计和无偏估计均能满足要求,且对延迟时间的大小没有限制.     

基于PLC的真空泵性能参数自动检测系统设计

本文介绍了一套基于西门子S7-1200 PLC开发的、以触摸屏为人机交互界面的真空泵性能参数自动检测系统。该系统可实现真空度、抽速、温度、转速、电流电压等性能参数的自动测量、采集、处理、储存,并在人机界面以参数、图表等多种形式进行显示等功能。系统在运行过程中可自动判断设备运行安全性并报警,同时上传相关数据至上位机。本文从该系统的总体方案设计、硬件组成和软件编程三方面进行了深入探讨。     

Experimental study on high viscosity fluid micro-droplet jetting system

Fluid dispensing is a method by which fluid materials(such as epoxy,adhesive,and encapsulant) are delivered in a controlled manner in electronics packaging.Fluid jetting,derived from inkjet technology,is a noncontact,data-driven fluid dispensing technology.But ideal fluid materials for packaging are usually high viscous,which is difficult to realize by traditional inkjet technology.In this paper,a mechanical micro-droplet jetting system for high viscosity fluid was proposed.It consists of dispensing valve,m...     

基于定子电压定向的双馈风力发电机功率控制

本文介绍了一种基于定子(电网)电压定向的双馈风力发电机输出功率控制策略。此控制策略无需测量定子磁链,可实现发电机输出有功、无功功率的独立控制。并根据此控制方法,使用Matlab/Simulink软件构建了一个用于1.5MW双馈风力发电机的输出功率控制系统,仿真验证了在有功功率、无功功率或电网电压出现降落的条件下,该控制策略的有效性。     

某变电站无功补偿电容器故障分析及解决方案

通过对某变电站供配电系统进行建模,仿真变电站35 kV母线上的谐波电流在3种不同工况下对供配电系统谐振点的影响,分析出35 kV无功补偿电容器发生故障的原因。最后提出1种解决方案并通过建模仿真给出治理后的效果。     

变压器纵差保护CT二次接线及正确性检查

分析了一种常见的变压器纵差保护电流互感嚣错误接线及其危害,说明了正确接线方式,并介绍了如何通过作六角图来检查纵差保护二次接线的正误。