有机发光材料中间体1-羟基芘的合成工艺研究

1-羟基芘是一种重要的有机电致光材料中间体,该中间体能与一些芳烃及其衍生物进一步反应得到不同性质的光电材料,具有广阔的市场前景。为获得1-羟基芘,本文以芘为原料,在二氯甲烷溶液中,在三氯化铝的催化下与乙酰氯反应得到1-乙酰芘;然后与间氯苯过甲酸或过氧硼酸发生bayer-villiger反应,得到1-乙酰氧基芘;接着在甲醇和四氢呋喃混合溶液中水解得到1-羟基芘,该合成路线短,原料易得,适应工业化生产,经1HNMR光谱鉴定,产物与1-羟基芘结构一致。     

金属磁记忆检测技术概况及初步应用

介绍金属磁记忆检测技术的背景、发展、现状、目的和意义，用两个应用实例初步评价了磁记忆检测技术的有效性，提出了磁记忆技术发展的近期和远期目标，展望了应用前景。     

Temperature-dependent diffusion coefficient of soluble substances during ethanol extraction of clove

The temperature dependence of the diffusion coefficient of ethanol-soluble substances from ground cloves (particle size 250 μm) during extraction was estimated by fitting batch extraction data at several temperatures (27.8, 40, 50, and 60°C) to a previously developed mass transfer model. The model was based on spherical geometry of particles. Nonlinear regression analysis was used to develop an equation that describes the diffusivity as a function of temperature. The temperature dependence ofD _A was of the Arrhenius type.     

Resistivity and thermal reproducibility of carbon black and metallic powder filled silicone rubber heaters

Flexible heaters were prepared by extruding platinum‐catalyzed silicone rubber composites with conductive carbon black (CB) and metallic fillers. The conductor resistivity of the extruded heaters decreased in order of conductive titanium dioxide (TiO₂) > aluminum powder ≈ zinc powder > copper powder. Thermoelectric switching phenomena were investigated for the silicone rubber/CB/metallic powder systems. The positive temperature coefficient effect was dependent mainly on the CB content rather than on the content of the metallic powders. Resistivity and thermal reproducibility of the extruded heaters were also investigated by periodically applying AC voltage of 110 V. The heaters containing copper and TiO₂ powders exhibited excellent electrical reproducibility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1122–1128, 2005     

Comparison of relative viscosity measurement of polyvinylpyrrolidone in water by glass capillary viscometer and differential dual‐capillary viscometer

The relative viscosity (RV) of polyvinylpyrrolidone (PVP) with different molecular weights was measured with a glass capillary viscometer and with a differential dual‐capillary viscometer in water at different concentrations. For the differential dual‐capillary viscometer, RV increases with a decreasing flow rate, especially for high molecular weight PVP at a 1% concentration. A good agreement in the RV between the two methods can be obtained for PVP with different molecular weights and at various concentrations if an appropriate flow rate is selected for the differential dual‐capillary viscometer. Special precaution is needed when using the differential dual‐capillary viscometer to measure the viscosity of a pure solvent. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1312–1315, 2002     

An empirically validated simulation for understanding the relationship between process conformance and technology skills

Software development is a fast-paced environment where developers need constant update to ever-changing technologies. Furthermore, process improvement initiatives have been proven useful in increasing the productivity of a software organization. As such, these organizations need to decide where to invest their training budget. As a result, training in technological update to their workforce or training in process conformance with its productive processes become conflicting alternatives. This paper presents a system dynamics simulation of a software factory product line. The objective of this simulation is to understand the changes in behavior when selecting either one of the above-training alternatives. The system dynamics model was validated with an expert panel, and the simulation results have been empirically validated—using statistical process control—against the performance baseline of a real software development organization. With the simulation under statistical control and performing like the baseline, the independent variables representing process conformance (process training) and technology skills (skills training) were modified to study their impact on product defects and process stability. Our results show that while both variables have positive impact on defects and process stability, investment in process training results in a process with less variation and with fewer defects.     

板壳式换热器设置膨胀节的判定

介绍板壳式换热器的主要特点和应用。当壳体与板束温差较大时,笔者通过对产品开发的生产实践,提出解决板壳式换热器要否设置膨胀节的类似判定方法。     

Preparation and characterization of maleic anhydride‐g‐polypropylene/diamine‐modified clay nanocomposites

Polypropylene (PP)/montmorillonite (MMT) nanocomposites were prepared by compounding maleic anhydride‐g‐polypropylene (MAPP) with MMT modified with α,ω‐diaminododecane. Structural characterization confirmed the formation of characteristic amide linkages and the intercalation of MAPP between the silicate layers. In particular, X‐ray diffraction patterns of the modified clay and MAPP/MMT composites showed 001 basal spacing enlargement as much as 1.49 nm. Thermogravimetric analysis revealed that the thermal decomposition of the composite took place at a slightly higher temperature than that of MAPP. The heat of fusion of the MAPP phase decreased, indicating that the crystallization of MAPP was suppressed by the clay layers. PP/MAPP/MMT composites showed a 20–35% higher tensile modulus and tensile strength compared to those corresponding to PP/MAPP. However, the elongation at break decreased drastically, even when the content of MMT was as low as 1.25–5 wt %. The relatively short chain length and loop structure of MAPP bound to the clay layers made the penetration of MAPP molecules into the PP homopolymer phase implausible and is thought to be responsible for the decreased elongation at break. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 307–311, 2005     

基于CFD技术的泵喷推进器水动力性能仿真方法

文章利用CFD方法,采用高质量结构化网格、应用滑移网格技术对某泵喷的水动力性能进行了数值仿真研究。仿真过程中,计算域内控制方程为雷诺平均N-S方程,湍流模型为剪应力输运模型。计算完成后讨论了网格和湍流模型对计算结果的影响。仿真结果表明:该泵喷平衡特性较好,但效率偏低,与试验结果有较好的吻合。该方法在泵喷水动力性能仿真方面的成功应用为以后泵喷的设计及性能预报提供了一种可靠实用的途径。     

Interfacial adhesion reaction of polyethylene and starch blends using maleated polyethylene reactive compatibilizer

The interfacial reaction of the polyethylene (PE)/starch blend system containing the reactive compatibilizer maleated polyethylene (m‐PE) was directly characterized by Fourier transform infrared (FTIR) spectroscopy. A significant amount of anhydride groups on m‐PE existed as hydrolyzed forms, resulting in a large amount of carboxyl groups. Using a vacuum‐heating‐cell designed in the laboratory, the carboxyl groups were successfully transformed into the dehydrolyzed state (i.e., anhydride group). This result enabled the direct spectroscopic observation of chemical reaction occurring at the interface. For the PE/starch blend system containing m‐PE, the chemical reaction at the interface was verified by the evolution of ester and carboxyl groups in the FTIR spectra. The effect of the reactive compatibilizer on the interfacial morphology was also examined by scanning electron micrography (SEM). Enhanced interfacial adhesion was clearly observed for the blend system containing reactive compatibilizer. Tensile strengths of blend systems containing m‐PE also increased noticeably compared with the corresponding system without compatibilizer. A similar observation was made for the breaking elongation data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 767–776, 2002