Interfacial adhesion reaction of polyethylene and starch blends using maleated polyethylene reactive compatibilizer

The interfacial reaction of the polyethylene (PE)/starch blend system containing the reactive compatibilizer maleated polyethylene (m‐PE) was directly characterized by Fourier transform infrared (FTIR) spectroscopy. A significant amount of anhydride groups on m‐PE existed as hydrolyzed forms, resulting in a large amount of carboxyl groups. Using a vacuum‐heating‐cell designed in the laboratory, the carboxyl groups were successfully transformed into the dehydrolyzed state (i.e., anhydride group). This result enabled the direct spectroscopic observation of chemical reaction occurring at the interface. For the PE/starch blend system containing m‐PE, the chemical reaction at the interface was verified by the evolution of ester and carboxyl groups in the FTIR spectra. The effect of the reactive compatibilizer on the interfacial morphology was also examined by scanning electron micrography (SEM). Enhanced interfacial adhesion was clearly observed for the blend system containing reactive compatibilizer. Tensile strengths of blend systems containing m‐PE also increased noticeably compared with the corresponding system without compatibilizer. A similar observation was made for the breaking elongation data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 767–776, 2002     

Comparison of relative viscosity measurement of polyvinylpyrrolidone in water by glass capillary viscometer and differential dual‐capillary viscometer

The relative viscosity (RV) of polyvinylpyrrolidone (PVP) with different molecular weights was measured with a glass capillary viscometer and with a differential dual‐capillary viscometer in water at different concentrations. For the differential dual‐capillary viscometer, RV increases with a decreasing flow rate, especially for high molecular weight PVP at a 1% concentration. A good agreement in the RV between the two methods can be obtained for PVP with different molecular weights and at various concentrations if an appropriate flow rate is selected for the differential dual‐capillary viscometer. Special precaution is needed when using the differential dual‐capillary viscometer to measure the viscosity of a pure solvent. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1312–1315, 2002     

四坐标牙轮测量系统的误差分析

开发了一套对牙轮位置、角度等尺寸进行砟骅检测的四坐标系统，介绍了整个系统的测量方法。根据四坐标牙轮测量系统的特点和测量数据推导了牙轮被测参数的计算公式；仔细分析了测量系统的各误差源，并通过实验获得了相应的误差数据；建立了仪器的误差数学模型；提出了修正误差的方法。     

MODELLING ADSORPTION EQUILIBRIUM MOISTURE CHARACTERISTICS OF ROUGH RICE

Equilibrium Moisture Content (EMC) data for medium rough rice grain, Lido variety were obtained by equilibrating rice samples at different Equilibrium Relative Humidities (ERH) and Temperatures. The employed models to fit the data were GAB, modified Chung-Pfost, modified Halsey, Modified Henderson, and modified Oswin. The data were evaluated using the standard error of moisture content, mean relative standard error (%P) of the model and the correlation coefficient r². The GAB model by indirect regression described the EMC the best, however its parameters lacked of physical meaning. The modified Chung-Pfost and modified Henderson equations presented a similar fit of the EMCERH relationships. The modified Chung-Pfost equation had lower residual values than the modified Henderson equation and was considered the best model to explain the EMC-ERH relationships.     

Aliphatic–aromatic polyester–polyaniline composites: preparation,characterization, antibacterial activity and conducting properties

Poly(butylene adipate‐co‐terephthalate) (PBAT) composites containing polyaniline (PANI) were prepared using a melt blending process. Acrylic‐acid‐grafted PBAT (PBAT‐g‐AA) and PANI were used to improve the compatibility and dispersibility of PANI within the PBAT matrix. The composites were characterised morphologically using scanning electron microscopy, chemically using Fourier transform IR spectrometry and ¹³C solid‐state nuclear magnetic resonance, and optically using UV‐visible spectroscopy. The electrical conductivity of the composites was also evaluated with a resistance tester and a cyclic voltameter. Escherichia coli (BCRC 10239) was chosen as the standard bacterium for determining the antibacterial properties of the composite materials. The anti‐static properties of the composites were also evaluated. The PBAT‐g‐AA/PANI composite showed markedly enhanced antibacterial and anti‐static properties due to the formation of amide bonds by the condensation of the carboxylic acid groups of PBAT‐g‐AA with the amino groups of PANI. The optimal level of PANI was 9 wt%, as excess PANI led to separation of the two organic phases, lowering their compatibility. Copyright © 2012 Society of Chemical Industry     

Formation and Accumulation of Intragranular Pores in the Hydrothermally Synthesized Barium Titanate Nanoparticles

As highly integrated circuits are demanded for high‐performance electric devices, small sizes of barium titanate (BaTiO₃) as a dielectric material are desirable for the application of multilayer ceramic capacitors. Since the small sizes of the particles degrade the dielectric property, especially below a certain critical size, understanding the probable cause is significant for the high‐performance capacitors. Here, we have demonstrated nanosized BaTiO₃ with average size below 30 nm and a uniform size distribution. High‐resolution transmission electron microscopy (TEM) shows that the as‐synthesized BaTiO₃ contains intragranular pores. We have analyzed the correlation between the intragranular pores inside nanoparticles and their phase ratio of cubic and tetragonal. We have found that the presence of the intragranular pores affects low tetragonality of BaTiO₃ particles, and the intragranular pores are generated by the accumulation of hydroxyl groups during hydrothermal reaction. Formation and accumulation of intragranular pores have been investigated by ex‐situ synchrotron X‐ray diffraction and TEM analysis, suggesting the phase evolution model of nanosized BaTiO₃.     

[Carboxyl‐11C]Labelling of Four High‐Affinity cPLA2α Inhibitors and Their Evaluation as Radioligands in Mice by Positron Emission Tomography

Cytosolic phospholipase A2α (cPLA2α) may play a critical role in neuropsychiatric and neurodegenerative disorders associated with oxidative stress and neuroinflammation. An effective PET radioligand for imaging cPLA2α in living brain might prove useful for biomedical research, especially on neuroinflammation. We selected four high‐affinity (IC₅₀ 2.1–12 nm ) indole‐5‐carboxylic acid‐based inhibitors of cPLA2α, namely 3‐isobutyryl‐1‐(2‐oxo‐3‐(4‐phenoxyphenoxy)propyl)‐1H‐indole‐5‐carboxylic acid ( 1 ); 3‐acetyl‐1‐(2‐oxo‐3‐(4‐(4‐(trifluoromethyl)phenoxy)phenoxy)propyl)‐1H‐indole‐5‐carboxylic acid ( 2 ); 3‐(3‐methyl‐1,2,4‐oxadiazol‐5‐yl)‐1‐(2‐oxo‐3‐(4‐phenoxyphenoxy)propyl)‐1H‐indole‐5‐carboxylic acid ( 3 ); and 3‐(3‐methyl‐1,2,4‐oxadiazol‐5‐yl)‐1‐(3‐(4‐octylphenoxy)‐2‐oxopropyl)‐1H‐indole‐5‐carboxylic acid ( 4 ), for labelling in carboxyl position with carbon‐11 (t_1/2=20.4 min) to provide candidate PET radioligands for imaging brain cPLA2α. Compounds [¹¹C] 1 – 4 were obtained for intravenous injection in adequate overall yields (1.1–5.5 %) from cyclotron‐produced [¹¹C]carbon dioxide and with moderate molar activities (70–141 GBq μmol^?1) through the use of Pd⁰‐mediated [¹¹C]carbon monoxide insertion on iodo precursors. Measured logD_7.4 values were within a narrow moderate range (1.9–2.4). After intravenous injection of [¹¹C] 1 – 4 in mice, radioactivity uptakes in brain peaked at low values (≤0.8 SUV) and decreased by about 90 % over 15 min. Pretreatments of the mice with high doses of the corresponding non‐radioactive ligands did not alter brain time–activity curves. Brain uptakes of radioactivity after administration of [¹¹C] 1 to wild‐type and P‐gp/BCRP dual knock‐out mice were similar (peak 0.4 vs. 0.5 SUV), indicating that [¹¹C] 1 and others in this structural class, are not substrates for efflux transporters.     

阿司匹林结晶过程的在线分析

晶体的颗粒尺寸分布和形状是结晶产品的两个关键质量指标,不仅影响结晶产品的性质,还影响下游的过滤、干燥及运输存储等过程。利用超声粒度分析仪、衰减全反射傅里叶红外光谱仪、浊度仪与二维成像系统等分析仪器在线测量了不同搅拌速率和不同降温速率下阿司匹林乙醇溶液结晶过程中温度、浓度、颗粒尺寸分布和形状的变化情况。实验结果表明：较低的降温速率或者较大的搅拌速率条件下得到含有大量细晶的阿司匹林结晶产品;较高的降温速率下得到长宽比较大的阿司匹林结晶产品。调节降温速率和搅拌速率是一种有效控制阿司匹林结晶产品尺寸分布与形状的方法。     

RAFT-derived polymer-drug conjugates: poly(hydroxypropyl methacrylamide) (HPMA)-7-ethyl-10-hydroxycamptothecin (SN-38) conjugates

A series of well‐defined polymer–drug conjugates were prepared in order to modify the physical properties of a known cytotoxic drug, 7‐ethyl‐10‐hydroxycamptothecin (SN‐38), the active metabolite of irinotecan (CPT‐11). Reversible addition–fragmentation chain transfer (RAFT) polymerisation was used to covalently and site‐specifically append a defined N‐(2‐hydroxypropyl)methacrylamide (HPMA) polymer to SN‐38 using a graft‐from process. These poly‐HPMA–SN‐38 conjugates displayed excellent aqueous solubility and stability, whilst retaining the cytotoxic activity of the parent SN‐38. In vitro co‐culture assays containing both cancer and noncancer cell lines demonstrated the specificity of RAFT‐derived poly‐HPMA–SN‐38 conjugates for cancerous cells. The concept of post‐optimisation modification of small‐molecule drugs through a graft‐from polymer conjugation method is introduced.     

内循环冷却吸收装置的开发及应用

根据吸收操作的特点，开发设计了一种内循环冷却吸收装置。该吸收装置在合成氨厂使用中显示出了较高的吸收效率，取得了较好的经济效益。试验证明，该装置有利于碳化尾气的处理，能解决碳化“水平衡”问题。