改性粉煤灰处理奥里油废水的实验研究

初步分析了奥里油废水的水质,研究了用酸改性粉煤灰处理奥里油废水的工艺。奥里油废水是一种含有一定表面活性剂、高COD值(大于6000 mg/L)、难生物降解和难O3氧化降解的炼油废水。利用改酸性粉煤灰可对该废水进行预处理,COD去除率达45%。预处理工艺条件是,室温下灰水质量比15∶50,吸附搅拌时间30 min,pH为2~10。     

醋酸乙烯-丙烯酸无皂乳液共聚的研究

以醋酸乙烯(VAc)为主单体,丙烯酸(AA)为改性功能单体,以半连续加料方式进行无皂乳液共聚过程,得到了稳定且固含量为30%左右的乳液。探讨了功能单体AA含量、反应温度等对共聚的影响。采用FT-IR、粒径分析等方法对共聚物的组成、乳胶粒子的尺寸及分布进行了分析表征。结果表明:在(65±2)℃下聚合,所得乳液稳定性好、转化率高、反应完全,且随着功能单体AA含量的增加,乳液黏度上升、单体转化率下降、乳胶粒粒径变小且粒径呈单分散性。     

处理硝基苯类废水的Fenton催化氧化技术研究现状

硝基苯类化合物是高毒性物质,难以生物降解且对生化反应有抑制和毒害作用.因此,硝基苯对环境的污染问题越来越受到科学研究者的关注.目前,采用Fenton氧化技术降解硝基苯类化合物的机理和工艺研究越来越活跃.作者就近几年来国内外Fenton催化氧化技术降解硝基苯类废水的研究现状进行了综述.     

氨基甲酸酯基丙烯酸酯的合成及其光固化性能

利用碳酸亚乙酯与1,6-己二胺、异佛尔酮二胺反应，制备出两种含氨基甲酸酯基的二元醇，基于氨基甲酸酯二元醇与1,6-己二醇二丙烯酸酯（HDDA）、新戊二醇二丙烯酸酯（NPGDA）及三羟甲基丙烷三丙烯酸酯（TMPTA）本体条件下的Oxa-Michael加成反应及酯交换反应，合成出6种含氨基甲酸酯基的丙烯酸酯混合物。利用FTIR及高分辨质谱分析了产物结构，用FTIR考察了所合成氨基甲酸酯基丙烯酸酯光固化过程的动力学,测定了光固化膜的性能。结果表明，在含占总质量分数3% 的2-羟基-2-甲基-1-苯基-1-丙酮（1173）光引发剂的引发下，氨基甲酸酯基丙烯酸酯能在30s内固化形成表面平整、柔韧性（0.5~2.5mm）良好、透明或半透明的膜；固化膜的凝胶率及铅笔硬度分别为92%~96%、4~5H，对玻璃的附着力为0~1级。     

Preparation of hyperbranched polymers by atom transfer radical polymerization

A cheap acrylic AB* monomer, 2‐(2‐chloroacetyloxy)‐isopropyl acrylate (CAIPA), was prepared from 2‐hydroxyisopropyl acrylate with chloroacetyl chloride in the presence of triethylamine. The self‐condensing vinyl polymerization by atom transfer radical polymerization (ATRP), a “living”/controlled radical polymerization, has yielded hyperbranched polymers. All the polymerization products were characterized by proton nuclear magnetic resonance spectroscopy (¹H NMR). CAIPA exhibited distinctive polymerization behavior that is similar to a classical step‐growth polymerization in the relationship of molecular weight to polymerization time, especially during the initial stage of the polymerization. However, a significant amount of monomer remained present throughout the polymerization, which is consistent with typical chain polymerization. Also, if a much longer polymerization time was used, the polymer became gel. As a result of the unequal reactivity of group A* and B*, the polymerization is different from an ideal self‐condensing vinyl polymerization: the branch structures of polymers prepared depend dramatically on the ratio of 2,2'‐bipyridyl to CAIPA. Hyperbranched polymers exhibit improved solubility in organic solvent, however, they have lower thermal stability than their linear analogs. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2114–2123, 2002     

Locomotion Skills for Insects with Sample‐based Controller

Natural‐looking insect animation is very difficult to simulate. The fast movement and small scale of insects often challenge the standard motion capture techniques. As for the manual key‐framing or physics‐driven methods, significant amounts of time and efforts are necessary due to the delicate structure of the insect, which prevents practical applications. In this paper, we address this challenge by presenting a two‐level control framework to efficiently automate the modeling and authoring of insects’ locomotion. On the top level, we design a Triangle Placement Engine to automatically determine the location and orientation of insects’ foot contacts, given the user‐defined trajectory and settings, including speed, load, path and terrain etc. On the low‐level, we relate the Central Pattern Generator to the triangle profiles with the assistance of a Controller Look‐Up Table to fast simulate the physically‐based movement of insects. With our approach, animators can directly author insects’ behavior among a wide range of locomotion repertoire, including walking along a specified path or on an uneven terrain, dynamically adjusting to external perturbations and collectively transporting prey back to the nest.     

Rate control of hierarchical B prediction structure for multi-view video coding

Rate control plays an important role in regulating bit streams in video coding. In order to obtain good coding performance, the hierarchical B prediction structure has been adopted in Multi-view Video Coding (MVC). However, the conventional rate control scheme is not efficient in the hierarchical B prediction structure. In this paper, we propose a rate control algorithm to address this problem. First, the accurate estimation of Mean Absolute Distortion (MAD) of the current frame is desired for both quantization parameter (QP) selection and Rate Distortion Optimization (RDO). Considering the hierarchical B structure, a bi-directional MAD prediction model is proposed to predict the MAD of the current frame by using the actual MADs of the encoded frames in the lower Temporal Layers (TLs). Second, the number of header bits has a close relationship with the TLs in the hierarchical B prediction structure. Therefore, we propose an enhanced prediction method in which a proportional relationship of the header bits is introduced if the frames are located in different TLs. Experimental results show that our proposed algorithm can achieve both accurate target bit rate and good coding performance.     

变频调速技术在石化厂的应用

变频调速技术由于调节方便、节能效果显著,在石化厂应用越来越广泛,本文论述了流程离心泵调速的基本原理,近年来变频调速技术在石化厂的应用,并对应用变频技术后产生的效益作了分析对比,同时根据实际情况提出了在变频器应用过程中应注意的一些问题。     

分形在陶瓷微观结构中的应用

分形作为一种数学方法 ,其应用范围日益扩大 ,已经逐渐渗入各学科领域。本文简要介绍了分形的概念以及它在陶瓷微观结构中的应用情况 ,重点介绍了位错、晶粒度、晶界的分形     

Poly(methyl methacrylate) nanoparticles prepared through microwave emulsion polymerization

The emulsifier‐free emulsion polymerization of methyl methacrylate (MMA) was conducted with microwave irradiation. Superfine and monodisperse poly(methyl methacrylate) (PMMA) microspheres were obtained. Microwave irradiation notably promoted the polymerization reaction. This phenomenon was ascribed to the acceleration of the initiator [potassium persulfate (KPS)] decomposition by microwave irradiation. The experimental results revealed that the apparent activation energy of KPS decomposition decreased from 128.3 to 106.0 kJ/mol with microwave irradiation. The average particle size of the prepared PMMA latex was mainly controlled with the MMA concentration; it increased linearly from 103 to 215 nm when the MMA concentration increased from 0 to 0.3 mol/L and then remained almost constant at MMA concentrations of 0.3–1.0 mol/L. The KPS concentration had no effect on the average particle size, but the particle size dispersity was significantly reduced by a high KPS concentration. With a mixed polymerization phase (water/acetone = 1:3 v/v) or a redox initiation system, PMMA nanoparticles were obtained with an average particle size of 45 or 67 nm, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2815–2820, 2004