Microwave plasma enhanced chemical vapor deposition diamond synthesis from high carbon content source

To synthesize diamond films by microwave plasma enhanced chemical vapor deposition (MPECVD), the methane concentration (CH₄/H₂)plays a crucial role. It is well-known that there always exists a critical methane concentration (≤0.6%) only below which a good quality diamond film can be obtained. In this study, however, the phenomena of diamond synthesis resulting from high carbon concentration conditions were observed. The molten metals, e.g., Ag, Cu, were used as the deposition substrates on which crystalline diamonds can be achieved from a methane content of CH₄/H₂≥6% or even from solid carbon sources. These results suggest that there may exist a low methane content boundary layer (<0.6%) in the proximity of molten metal surface on which suitable species, CH, CH⁺, H_α and H_β are composed for the diamond nucleation and growth similar to the condition as in the conventional low methane contents. The molten metal inclines to dissolve other forms of carbonaceous materials other than diamond, and thus keeps a much higher steady supply of carbon atoms that enhances the quality as well as the growth rate of the forming diamonds. Received: 23 June 2001 / Accepted: 23 July 2001     

光纤数字环路载波系统的发展

ＯＤＬＣ是当今用户接入网的新型设备，它一方面可取代端局，解决通信线路紧张和远距离大容量放号问题，另一方面也可满足日益增多的增值业务的需求。本文ＯＤＬＣ技术的基本原理，结合目前国内外常见ＯＤＬＣ系统，总结和对比了其基本特点，优势，并指明ＯＤＬＣ的技术发展方向和中国应用的前景。     

结构振动控制中压电阻尼技术研究—压电被动阻尼技术（一）

压电阻尼技术有两种类型：压电被动阻尼技术和压电主动阻尼技术。本文对其中的压电被动阻尼技术进行了研究，结果表明：通过给压电元件并联适当的外部电路，可使压电系统具有与粘弹阻尼材料及动力吸振器相似的物理特性。合理配置电路参数，可以实现最优阻尼比。     

二维地震过障碍观测系统模式及其参数设计

在二维地震勘探中,为了避免因地表障碍物使地震反射剖面出现间断现象,需要改变观测系统设计,跨越障碍物(江河、城镇等),以保证反射同相轴能连续追踪对比。在以往地震勘探中,有时因过障碍观测系统设计不合理,不但增加勘探费用,而且影响采集质量。因此只有科学合理地设计过障碍观测系统模式和参数,才能保证地震测线顺利通过障碍物,得到较好的障碍物下方的地震资料并降低勘探成本。为此本文在调查和研究大量野外实际的过障碍观测系统的基础上,总结归纳成三大类过障碍观测系统模式,并分析其特点和应用范围。采用图解法,推导出主要模式的跨越宽度、最小炮检距及最大炮检距等参数公式。采用这套过障碍观测模式不仅可以得到和障碍区两侧等质量的地震资料,而且可以有效地降低勘探成本。     

移动IP的关键技术

本详细描述了移动IP的工作过程，并介绍了移动IP的隧道技术和IPSec，最后对移动IP技术中存在几个热点问题进行了讨论。     

Interactive key frame selection model

Video summarization can provide a fine representation of the content of video stream and reduce a large amount of data involved in video indexing, browsing, and retrieval. Moreover, Key frame selection is an important step in the research of content-based video analysis and retrieval. Although there exist a variety of methods for key frame selection, they are heuristic and closed systems, which cannot dynamically generate video summary with user’s preference. In this paper, an M-estimator and epipolar line distance constraint camera motion estimation algorithm is introduced as camera parameters is an important motion feature for key frame selection, and Broyden-Fletcher-Goldfarb-Shanno (BFGS) method is applied to optimize estimated parameters. Moreover, since Interactive Computing is a novel-computing model that represents the transition of algorithm to interaction, an interactive model of key frame selection (IKFS) is presented as a result of improving the model of key frame selection (KFS). The model of KFS and IKFS are proved to satisfy the criterion of induction and coinduction, respectively. Experimental results show that the processing scheme generates flexible and desirable summarizations whose distortion rate is lower than current method. Above all, IKFS is an extension to KFS.     

超宽带无线通信技术概述

主要介绍了超宽带(UWB)无线通信技术的起源、概念及其基本工作原理，包括信号产生、系统构成、天线、接收机、调制方式等，阐述了UWB中的关键技术及性能特点，对UWB的局限性作了简要的介绍。     

A hexane solution deposition of SnS2 films from tetrabutyltin via a solvothermal route at moderate temperature

SnS₂ films have been deposited on glass and alumina plate substrates by the reactions between an organotin precursor [tetrabuyltin, (CH₂CH₂CH₂CH₃)₄Sn] and carbon disulfide in n-hexane at the temperature range 180-200 °C for 10-40 h. The reaction system was oxygen free and applied at a moderate temperature. The films so prepared were characterized by techniques of X-ray diffraction, Scanning electron microscopy, Raman and Mössbauer spectroscopies. The films deposited on glass as well as on alumina plate have an average thickness of 30 μm, but have different rose-like morphologies, which are influenced by both the anisotropic growths of crystals and the different substrate structures. Photoluminescence measurements show that the films have an emission peak at approximately 590 nm.     

Cr12MoV钢冷挤压成形模强化工艺的研究

针对Crl2MoV钢冷挤压成形模热处理存在的质量问题，对加热温度和方式进行了大量的试验研究，在此基础上，提出了改进的快速加热工艺。结果表明，经该工艺处理后，模具使用寿命得到显提高。     

横波速度各向异性初步探讨：—多波勘探资料的应用

在纵波、SH 型横波资料处理和解释过程中,我们发现四川 HBC 地区地下介质普遍存在方向各向异性。当横波通过方向各向异性介质时,分裂成两个波:一个波的偏振方向与裂缝平行,叫快横波;另一个波的偏振方向与裂缝走向垂直,叫慢横波。采用相应的观测和处理方法,便可获得快横波和慢横波剖面。根据同一界面的快、慢横波的旅行时可以求得各向异性系数。同样,还可以利用 SH 波与转换波的速度比求取各向异性系数。各向异性系数的大小,反映了裂缝的发育程度。如果野外作了 X、Y 分量观测,室内又作了坐标旋转处理,那么,就可以进一步确定裂缝带的方向。如果未作上述工作,也可以根据构造线走向,大致确定裂缝带的发育方向。