On loop transformations for generalized cycle shrinking

This paper describes several loop transformation techniques for extracting parallelism from nested loop structures. Nested loops can then be scheduled to run in parallel so that execution time is minimized. One technique is called selective cycle shrinking, and the other is called true dependence cycle shrinking. It is shown how selective shrinking is related to linear scheduling of nested loops and how true dependence shrinking is related to conflict-free mappings of higher dimensional algorithms into lower dimensional processor arrays. Methods are proposed in this paper to find the selective and true dependence shrinkings with minimum total execution time by applying the techniques of finding optimal linear schedules and optimal and conflict-free mappings proposed by W. Shang and A.B. Fortes     

A versatile data acquisition system for time resolved X-ray scattering using gas proportional detectors with delay line readout

A data acquisition system for time resolved X-ray scattering experiments using linear, quadrant or area gas proportional detectors with delay line readout based on commercially available hardware (National Instruments) is described. The system can easily be configured for recording data from point detectors (e.g. photomultipliers and photodiodes) and/or ancillary data only. Applications involving measurements with two different types of time to digital converters illustrate the features and performances of the system.     

面向对象的程序设计语言CLUSTER86的设计与实现

本文介绍了笔者设计并实现的一种新型的面向对象的程序设计语言,着重讨论了在设计过程中采用的新的概念,并和其它类似语言作了比较.     

薄板坯连铸连轧工艺对铌微合金化高强度钢组织和性能的影响

首先建立薄板坯连铸连轧工艺的试验室模拟技术，并运用该模拟技术，研究薄板坯连铸连轧工艺(CSP)和传统板坯再加热工艺(TRP)两种工艺对铌微合金化高强度钢的显微组织和力学性能的影响。研究结果表明：CSP钢的晶粒细化效果不如TRP钢，两者的平均铁素体晶粒尺寸分别为8．17μm和6．30μm。在CSP试验钢板中铌的析出量较大，特别是在铁素体中细小颗粒的铌的析出物较多，沉淀强化效果较强。CSP试验钢的σ0.5和σb分别较TRP工艺低约40MPa和约25MPa，同时其低温冲击韧性较好，FATT温度较低。     

单壁纳米碳管/纳米铝基复合材料的增强效果

用半连续氢电弧法和活性氢等离子蒸发法分别制备出单壁纳米碳管(SWNTs)和纳米A1粉体，然后用提纯后的SWNTs和纳米A1粉体制备出SWNTs含量(质量分数)分别为0、2．5％、5．0％、7．5％和10.0％的单壁纳米碳管／纳米铝基块体复合材料．SWNTs对高强度纳米A1基体具有显著的增强作用，当SWNTs含量小于5．0％时，材料的硬度随着SWNTs含量的提高线性上升．其中5％SWNTs和纳米A1的复合增强效果最好，其硬度可达2.89GPa，大约是粗晶A1(0．15GPa)的20倍．当SWNTs含量超过5．0％时，增强效果开始缓慢的下降．讨论了单壁纳米碳管增强纳米铝基复合材料的强化机制．     

武钢 10000 m3/h制氧机主冷泄漏故障处理及应急保产方式

氧气生产单位保用户用气一旦出现较为紧张的局面时，如何正确处理保安全生产运行、保用户生产、安排抢修时间三者之间的关系，值得关注与研究。     

DESP: a distributed economics-based subcontracting protocol for computation distribution in power-aware mobile ad hoc networks

In this paper, we present a new economics-based power-aware protocol, called the distributed economic subcontracting protocol (DESP) that dynamically distributes task computation among mobile devices in an ad hoc wireless network. Mobile computation devices may be energy buyers, contractors, or subcontractors. Tasks are transferred between devices via distributed bargaining and transactions. When additional energy is required, buyers and contractors negotiate energy prices within their local markets. Contractors and subcontractors spend communication and computation energy to relay or execute buyers' tasks. Buyers pay the negotiated price for this energy. Decision-making algorithms are proposed for buyers, contractors, and subcontractors, each of which has a different optimization goal. We have built a wireless network simulator, called ESIM, to assist in the design and analysis of these algorithms. When the average communication energy required transferring a task is less than the average energy required to execute a task, our experimental results indicate that markets based on our protocol and decision-making algorithms fairly and effectively allocate energy resources among different tasks in both cooperative and competitive scenarios.     

NexGen的Nx586－Pentium的又一个挑战者

本文简单介绍ＮｅｘＧｅｎ公司最新设计出的Ｎｘ５８６ＣＰＵ。它是一种８０×８６兼容的处理器，文中介绍了它的微体系结构，ＲＩＳＣ８６指令等。     

管外上升R－113流体的沸腾换热试验

详细介绍了Ｒ－１１３流体管外上升流动的沸腾换热试验，包括试验台架、流量计和温度测量的修正，以及试验数据。拟合的换热关系式为ｑ＝５２８（Ｔｗ─Ｔｓ）１．３３。