fMRI-based Decoding of Visual Information from Human Brain Activity: A Brief Review

Machine Intelligence Research - One of the most significant challenges in the neuroscience community is to understand how the human brain works. Recent progress in neuroimaging techniques have...     

Modeling and Control of Hybrid-driven Gliding Motion for an Underwater Gliding Snake-like Robot

International Journal of Control, Automation and Systems - An underwater gliding snake-like robot (UGSR) combines the advantages of an underwater glider (UG) and an underwater snake-like robot...     

Reaction mechanism and microstructure evolution of reaction sintered <Emphasis Type="Italic">h</Emphasis>-BN

Hexagonal boron nitride ceramic (h-BN) based on the nitridation of B powders was obtained by reaction sintering method. The effects of sintering temperature on the mechanical properties and microstructure of the resultant products were investigated and the reaction mechanism was discussed. Results showed that the reaction between B and N₂ occurred vigorously at temperatures ranging from 1 000 °C to 1 300 °C, which resulted in the generation of t-BN. When the temperature exceeded 1 450 °C, transformation from t-BN to h-BN began to occur. As the sintering temperature increased, the spherical particles of t-BN gradually transformed into fine sheet particles of h-BN. These particles subsequently displayed a compact arrangement to achieve a more uniform microstructure, thereby increasing the strength.     

Fe_(40)Co_(40)Zr_(10)B_9M_1(M=Cu,Ge,Ag)合金的热稳定性及微观结构研究

采用单辊快淬法制备Fe40Co40Zr10B9Cu1、Fe40Co40Zr10B9Ge1和Fe40Co40Zr10B9Ag1非晶合金薄带,并对3种合金在不同温度下进行热处理.利用差热分析仪(DTA)和X射线衍射仪(XRD)等测试手段对样品的热稳定性及微观结构进行研究.结果表明:Fe40Co40Zr10B9Cu1、Fe40Co40Zr10B9Ge1和Fe40Co40Zr10B9Ag13种合金的激活能分别为262.4、267.6和252.3 k J/mol,说明Cu元素、Ge元素和Ag元素的添加对合金的热稳定性影响不大,Ge元素的添加最有利于提高合金的热稳定性.3种合金的晶化过程相似:非晶→非晶+α-Fe(Co)→α-Fe(Co)+Zr Co3B2+Fe(Co)3Zr.     

基于改进Kendall-f算法的发电机定子温度分析

在线监测发电机定子温度可有效发现定子部分过热性故障,如何从检测的温度数据中提取反映定子故障预警的信息是目前国内外研究的热点。该文采用可变窗改进Kendall-f算法处理监测温度数据,提取其变化趋势特征信息;采用偏度分析提取监测温度异常值,从而正确诊断定子过热性故障,仿真分析及实验结果表明该方法有效提高了定子温度监测与预警的准确率。     

Deformation transition of intact coal induced by gas injection

Gas migration in coal bed is a multiple-physical process, of which not only includes gas desorption/diffusion through coal matrix and gas Darcy flow through the cleat system, but also results in deform...     

Accelerated electrospark deposition and the wear behavior of coatings

Electrospark deposition (ESD) is a coating process that is featured by low heat input to the substrate. Low coating efficiency and other limitations influence its wider application. The present paper introduces newly designed ESD equipment, by which a higher coating rate can be reached. The relationship among coating thickness, surface roughness, and process parameters such as pulse energy, pulse frequency, and deposition time are presented. Electrospark deposition coating by the new equipment on AISI 1045 steel (with WC-8% Co as electrode) increases the wear resistance by 5 to 8 times. The micromechanism is investigated by scanning electron microscopy observation.     

对Al-Cu合金中α-Al及Al2Cu生长行为的探讨

研究了Al-Cu合金中α-Al和Al2Cu的生长行为,分析了初生α-Al及初生Al2Cu作为共晶核心形核的能力.结果发现,在过共晶组织中,初生相Al2Cu形貌大部分有明显的拐角,观察其平面有的呈矩形,呈现小面生长特性.而α-Al与Al2Cu共晶生长时,Al2Cu择优生长特征削弱,与α-Al耦合生长呈现非小面-非小面生长,表明Al2Cu在不同的生长阶段表现出的生长行为不同.在亚共晶组织中,初生相α-Al周围形成离异共晶的Al2Cu,而过共晶组织中初生相Al2Cu周围没有离异共晶的α-Al,表明初生相Al2Cu作为共晶层片核心的能力比初生相α-Al作为共晶层片核心的能力强.     

AGING BEHAVIOUR OF PARTICULATE REINFORCED ALUMINUM ALLOY MATRIX COMPOSITES

The process of aging precipitation in SiC_p/6061 and Al_2O_3/6061 composites were investigated. Hardness testing, differential scanning calorimetry(DSC) and transmission electron microscopy were employed. Results showed that the precipitation phase form directly along dislocation lines in the composites because the particles produce high densities of dislocations which makes vacancy densities in the composites decrease, and the main precipitation phase at peak hardness was β′ phase.     

用计算机图形处理软件定量分析SEM图像

用图形处理软件PHOTOSHOP对SEM图像进行图像定量分析，对高温合金K23σ析出相的体积分数和M8钢样的夹杂物颗粒尺寸进行了定量测定。结果表明，该方法操作方便，有一定的可行性。