Numerical Modeling of Oxidized 2D C/SiC Composites in Air Environments Below 900 °C: Microstructure and Elastic Properties

A numerical model is presented for simulation of the oxidation-affected behaviors of two dimensional carbon fiber-reinforced silcon carbide matrix composite (2D C/SiC) exposed to air oxidizing environments below 900 °C, which incorporates the modeling of oxidized microstructure and computing of degraded elastic properties. This model is based upon the analysis of the representative volume cell (RVC) of the composite. The multi-scale model of 2D C/SiC composites is concerned in the present study. Analysis results of such a composite can provide a guideline for the real 2D C/SiC composite. The micro-structure during oxidation process is firstly modeled in the RVC. The elastic moduli of oxidized composite under non-stress oxidation environment is computed by finite element analysis. The elastic properties of 2D-C/SiC composites in air oxidizing environment are evaluated and validated in comparison to experimental data. The oxidation time, temperature and fiber volume fractions of C/SiC composite are investigated to show their influences upon the elastic properties of 2D C/SiC composites.     

偶联剂对玻璃纤维增强淀粉/聚乳酸复合材料性能的影响

分别以马来酸酐、KH550、KH560和KH570为偶联剂对玻璃纤维进行预处理,再与淀粉、聚乳酸(PLA)复合,通过熔融挤出法制备玻璃纤维增强淀粉/PLA复合材料。研究了偶联剂种类对玻璃纤维增强复合材料熔融指数、力学性能、热性能和熔融流变性能的影响。实验发现马来酸酐、KH550、KH570、KH560处理玻璃纤维增强淀粉/PLA复合材料的熔融指数和力学性能都依次增大,表明KH560处理玻璃纤维增强淀粉/PLA复合材料的界面黏结作用最强。对热性能进行表征发现,马来酸酐、KH550、KH570、KH560处理玻璃纤维增强淀粉/PLA复合材料玻璃化转变温度、重结晶温度、结晶度和热稳定性均依次提高。受玻璃纤维与淀粉/PLA基体界面黏结效果的影响,马来酸酐、KH550、KH570、KH560处理玻璃纤维增强淀粉/PLA体系的储能模量和复数黏度依次增大。     

Electric Power Generation through the Direct Interaction of Pristine Graphene‐Oxide with Water Molecules

Converting ubiquitous environmental energy into electric power holds tremendous social and financial interests. Traditional energy harvesters and converters are limited by the specific materials and complex configuration of devices. Herein, it is presented that electric power can be directly produced from pristine graphene oxide (GO) without any pretreatment or additives once encountering the water vapor, which will generate an open‐circuit‐voltage of up to 0.4–0.7 V and a short‐circuit‐current‐density of 2–25 µA cm^?2 on a single piece of GO film. This phenomenon results from the directional movement of charged hydrogen ions through the GO film. The present work demonstrates and provides an extremely simple method for electric energy generation, which offers more applications of graphene‐based materials in green energy converting field.     

航天器振动试验控制技术进展

航天器对恶劣动力学环境的适应能力直接关系到整个航天飞行任务的成败,振动试验控制技术是动力学环境试验的关键环节.本文分析了近年来国内外航天器振动试验设备和振动控制算法的研发动态、基本原理和关键技术达到的水平.提出了跟踪研究的基本思路,途径及建议.     

Container-Based Internet of Vehicles Edge Application Migration Mechanism

Internet of Vehicles (IoV) applications integrating with edge computing will significantly drive the growth of IoV. However, the contradiction between the high-speed mobility of vehicles, the delay sensitivity of corresponding IoV applications and the limited coverage and resource capacity of distributed edge servers will pose challenges to the service continuity and stability of IoV applications. IoV application migration is a promising solution that can be supported by application containerization, a technology forseamless cross-edge-server application migration without user perception. Therefore, this paper proposes the container-based IoV edge application migration mechanism, consisting of three parts. The first is the migration trigger determination algorithm for cross-border migration and service degradation migration, respectively, based on trajectory prediction and traffic awareness to improve the determination accuracy. The second is the migration target decision calculation model for minimizing the average migration time and maximizing the average service time to reduce migration times and improve the stability and adaptability of migration decisions. The third is the migration decision algorithm based on the improved artificial bee colony algorithm to avoid local optimal migration decisions. Simulation results show that the proposed migration mechanism can reduce migration times, reduce average migration time, improve average service time and enhance the stability and adaptability of IoV application services.     

二溴对甲基偶氮甲磺光度法测定钢中微量锶

研究了二溴对甲基偶氮甲磺与锶生成2:1兰色络合物进行钢中微量锶的测定.该法λ_(max)=638nm,摩尔吸光系数E_(638)=5.01×10~4,锶量在0.02～0.34μg/L范围内服从比尔定律.方法已用于钢中微量锶的测定,结果满意.