Growth of highly orientated strontium barium niobate thin films on Si substrates through the sol–gel process using a K: SBN template layer

We report the growth of highly C-axis orientation of Sr _x Ba_1−x Nb₂O₆ (SBN) thin films on p-type (100) Si substrates by using a potassium-substituted SBN template layer with the sol–gel method. The crystallization of SBN thin films was found closely related to the potassium ion doping concentration and the postannealing temperature of the K-SBN template layer. Secondary ion mass spectrometry analysis showed that potassium elements were accumulated at the interface of the template layer and silicon substrate. SBN films postannealed at 750 °C with K-SBN template layer has a smaller full width at half maximum of X-ray rocking curve of 2.45° than that of 5.40° for the pure SBN films. By introducing a template layer, the surface morphologies of SBN films fabricated on silicon substrate were greatly improved.     

Ring‐opening polymerization of D,L‐lactide by rare earth 2,6‐dimethylaryloxide

Ring‐opening polymerization of D,L ‐lactide (LA) has been successfully carried out by using rare earth 2,6‐dimethylaryloxide (Ln(ODMP)₃) as single component catalyst or initiator for the first time. The effects of different rare earth elements, solvents, monomers and catalyst concentration as well as polymerization temperature and time on the polymerization were investigated. The results show that La(ODMP)₃ exhibits higher activity to prepare poly(D,L ‐lactide) (PLA) with a viscosity molecular weight of 4.5 × 10⁴ g mol^?1 and the conversion of 97 % at 100 °C in 45 min. The catalytic activity of Ln(ODMP)₃ has following sequence: La > Nd > Sm > Gd > Er > Y. A kinetic study has indicated that the polymerization is first order with respect to both monomer and catalyst concentration. The apparent activation energy of the polymerization of LA with La(ODMP)₃ is 69.6 kJ mol^?1. The analyses of polymer ends indicate that the LA polymerization proceeds according to ‘coordination–insertion’ mechanism with selective cleavage of the acyl–oxygen bond of the monomer. Copyright © 2004 Society of Chemical Industry     

TM1300多媒体DSP的百兆以太网通信接口的设计实现

主要研究TM1300多媒体数字信号处理器(DSP)在pSOS嵌入式操作系统下的100 Mbit/s高速以太网接口的设计与实现.硬件方面,介绍了TM1300系统与RTL8139以太网驱动芯片通过PCI总线互连的实现方式,重点介绍了其中PCI仲裁器的设计和PCI配置空间地址的设置方法;软件方面,介绍了在DSP端内嵌的pSOS操作系统下开发软件驱动RTL8139芯片的方法,重点描述了pSOS的pNA 网络组件的NI接口、RTL8139芯片收发数据的控制方式、驱动程序的发送缓存管理、TM1300访问PCI空间的途径以及内存与数据缓存一致性等要点.最后从速率、可靠性、效率3个方面对实现的以太网通信接口进行了测试,给出了详细的实测结果.测试结果显示,与基于RTL8029芯片开发的以太网接口相比,各项性能均有较大提高.     

Treatment of low turbidity water by sweep coagulation using bentonite

A novel strategy of sweep coagulation to treat low turbidity water is presented herein. Study findings demonstrated that an Na⁺‐saturated bentonite with medium cation exchange capacity (CEC) resulted in significant turbidity removal at a bentonite dosage of 30 mg dm^?3. Bentonite dispersion with fully delaminated platelets tended to undergo a more porous type of coagulation with intense face‐to‐face interactions of platelets and effectively entrapped TiO₂ particles in band‐type structures. This type of coagulation usually results in a large volume of settled flocs with a fluffy structure and excellent turbidity removal efficiency for sweep coagulation. The sign and magnitude of electrical charge on TiO₂ particles has a minor effect on the efficiency of sweep coagulation. Copyright © 2005 Society of Chemical Industry     

MRI fuzzy segmentation of brain tissue using neighborhood attraction with neural-network optimization.

Image segmentation is an indispensable process in the visualization of human tissues, particularly during clinical analysis of magnetic resonance (MR) images. Unfortunately, MR images always contain a significant amount of noise caused by operator performance, equipment, and the environment, which can lead to serious inaccuracies with segmentation. A robust segmentation technique based on an extension to the traditional fuzzy c-means (FCM) clustering algorithm is proposed in this paper. A neighborhood attraction, which is dependent on the relative location and features of neighboring pixels, is shown to improve the segmentation performance dramatically. The degree of attraction is optimized by a neural-network model. Simulated and real brain MR images with different noise levels are segmented to demonstrate the superiority of the proposed technique compared to other FCM-based methods. This segmentation method is a key component of an MR image-based classification system for brain tumors, currently being developed. Index Terms-Improved fuzzy c-means clustering (IFCM), magnetic resonance imaging (MRI), neighborhood attraction, segmentation.     

LF泡沫精炼渣脱硫动力学的实验研究

对CaO -Al2 O3 -SiO2 系泡沫精炼渣进行了实验室脱硫动力学研究 ,得到的硫传质系数为 1.45 9× 10 -5m s。还就泡沫精炼渣中发泡剂对其脱硫能力的影响进行了研究。     

CPM自滤波非稳腔YAG激光器研究

把由非谐振环和凸面全反射镜构成的自滤波非稳腔应用于撞脉冲锁模Ｎｄ：ＹＡＧ激光器，改善了光束的空间质量和输出稳定性，获得发散角为２倍衍射极限，能量５０ｍＪ，脉宽１０ｐｓ的锁模脉冲，并与未加滤波小孔的ＣＰＭ非稳腔的输出性能进行实验比较。，     

厚断面球铁的声速

论述了影响厚断面球铁声速和声波衰减的各种因素。指出，必须在应力状态下同时考核声速和声波衰减，以作为判别厚断面球铁材质的一种手段。     

助剂对Pd/树脂醚化催化剂催化性能的影响 Ⅰ.铝助剂的影响

研究了不同助剂对Ｐｄ／树脂醚化催化剂在临氢条件下对催化裂化汽油Ｃ５馏份与甲醇和Ｈ２反应的催化性能的影响。结果表明，在Ｐｄ／树脂醚化催化剂中引入Ｚｒ、Ｔｉ、Ｂ、Ｓｎ和Ａｌ等助剂后，都能改善催化剂的醚化、双键异构和二烯烃选择性加氢活性，其中以Ａｌ、Ｓｎ为最好。Ａｌ助剂的体积质量和负载方式对Ｐｄ－Ａｌ／树脂醚化催化剂的活性有影响。ＢＥＴ方法和Ｘ－射线荧光光谱分析（ＸＦＳＡ）表明，Ａｌ助剂对Ｐｄ－Ａｌ／树脂醚化催化剂的表面积、孔结构和Ｐｄ离子交换量影响较小。