TM1300多媒体DSP的百兆以太网通信接口的设计实现

主要研究TM1300多媒体数字信号处理器(DSP)在pSOS嵌入式操作系统下的100 Mbit/s高速以太网接口的设计与实现.硬件方面,介绍了TM1300系统与RTL8139以太网驱动芯片通过PCI总线互连的实现方式,重点介绍了其中PCI仲裁器的设计和PCI配置空间地址的设置方法;软件方面,介绍了在DSP端内嵌的pSOS操作系统下开发软件驱动RTL8139芯片的方法,重点描述了pSOS的pNA 网络组件的NI接口、RTL8139芯片收发数据的控制方式、驱动程序的发送缓存管理、TM1300访问PCI空间的途径以及内存与数据缓存一致性等要点.最后从速率、可靠性、效率3个方面对实现的以太网通信接口进行了测试,给出了详细的实测结果.测试结果显示,与基于RTL8029芯片开发的以太网接口相比,各项性能均有较大提高.     

Treatment of low turbidity water by sweep coagulation using bentonite

A novel strategy of sweep coagulation to treat low turbidity water is presented herein. Study findings demonstrated that an Na⁺‐saturated bentonite with medium cation exchange capacity (CEC) resulted in significant turbidity removal at a bentonite dosage of 30 mg dm^?3. Bentonite dispersion with fully delaminated platelets tended to undergo a more porous type of coagulation with intense face‐to‐face interactions of platelets and effectively entrapped TiO₂ particles in band‐type structures. This type of coagulation usually results in a large volume of settled flocs with a fluffy structure and excellent turbidity removal efficiency for sweep coagulation. The sign and magnitude of electrical charge on TiO₂ particles has a minor effect on the efficiency of sweep coagulation. Copyright © 2005 Society of Chemical Industry     

Traveling-wave piezoelectric linear motor Part I: the stator design.

A new type of piezoelectric linear motor incorporating a traveling wave has been developed. The linear motor is comprised of a stator and a carriage. The stator design, which consists of a meander-line structure and gear teeth mounted on the meander-line structure, is the focus of this article. The meander-line structure is constructed with bimorph actuators arranged in a line. These actuators are driven by two phased sets of alternating current (ac) in order to generate a traveling wave. The traveling wave is transferred to the gear teeth, by which the carriage is driven. Modeling of the stator is derived by use of a strain energy method. The performance of various materials is evaluated by analytical and experimental methods. The analytical and the experimental results are quite approximate. Modal analysis is investigated using ANSYS. Appropriate modes associated with ultrasonic levels of resonant frequency are selected to obtain desired motion and to enhance the output performance. Surface speed for various applied input voltage are studied and indicate a nearly linear relationship. The stator in combination with the carriage makes up the linear motor.     

MRI fuzzy segmentation of brain tissue using neighborhood attraction with neural-network optimization.

Image segmentation is an indispensable process in the visualization of human tissues, particularly during clinical analysis of magnetic resonance (MR) images. Unfortunately, MR images always contain a significant amount of noise caused by operator performance, equipment, and the environment, which can lead to serious inaccuracies with segmentation. A robust segmentation technique based on an extension to the traditional fuzzy c-means (FCM) clustering algorithm is proposed in this paper. A neighborhood attraction, which is dependent on the relative location and features of neighboring pixels, is shown to improve the segmentation performance dramatically. The degree of attraction is optimized by a neural-network model. Simulated and real brain MR images with different noise levels are segmented to demonstrate the superiority of the proposed technique compared to other FCM-based methods. This segmentation method is a key component of an MR image-based classification system for brain tumors, currently being developed. Index Terms-Improved fuzzy c-means clustering (IFCM), magnetic resonance imaging (MRI), neighborhood attraction, segmentation.     

各向异性损伤理论与复合材料层板损伤的实验研究(一)-各向异性损伤理论

本文讨论了各向异性损伤力学的基本概念并介绍了以应变等效性假设为基础的Lemaitre模型和以能量等效性假设为基础的Cordebois模型.在此基础上作者导出了两种损伤模型的损伤能释放率的表达式.文中作者定义了一维损伤时弹性材料板单元的一些损伤定义,并导出了两种模型在一维损伤时损伤能释放率Y₂的简单表达式,从而为复合材料层板损伤测量的实验研究提供了理论基础,     

LF泡沫精炼渣脱硫动力学的实验研究

对CaO -Al2 O3 -SiO2 系泡沫精炼渣进行了实验室脱硫动力学研究 ,得到的硫传质系数为 1.45 9× 10 -5m s。还就泡沫精炼渣中发泡剂对其脱硫能力的影响进行了研究。     

CPM自滤波非稳腔YAG激光器研究

把由非谐振环和凸面全反射镜构成的自滤波非稳腔应用于撞脉冲锁模Ｎｄ：ＹＡＧ激光器，改善了光束的空间质量和输出稳定性，获得发散角为２倍衍射极限，能量５０ｍＪ，脉宽１０ｐｓ的锁模脉冲，并与未加滤波小孔的ＣＰＭ非稳腔的输出性能进行实验比较。，     

高效率平面磁控溅射器的研制

介绍一种新型磁控溅射装置。它采用两块极性相对的环状磁铁的设计方法，通过扩大靶表面的等离子放电区域面积，使传统磁控溅射枪使用中经常受到的两个限制──溅射速率与靶的利用率得到了较大的改善。实验中铜靶在溅射功率密度为11W／cm~2时溅射速率约为800nm／min，如果继续提高功率则可获得更高的速率。而靶的利用率可达64％左右。另外，在认为出射粒子符合cos~nθ分布的前提下，发现当n＝3．3时，实验数据和理论数据符合得较好。     

不完全信息下的最终报价仲裁

基于争议双地仲裁人的裁决值有不同的概率估计，而这些估计是双方共同知识这一前提分析最终报价中仲裁，把它构造成一个不完全信息的非零和对策模型。然后给出了局部、全局Ｎａｓｈ平衡报价策略存在唯一的充分条件，最后探讨了双方认识存在的差异对争议人报价行为的影响。