调查洪水在无资料地区设计洪水计算中的应用

在无资料地区水利水电工程规划设计过程中,一般是采取多种方法计算设计洪水,经比较综合考虑推荐安全可靠的设计洪水作为采用成果。此法一般存在设计值偏大或偏小的幅度超过可允许范围问题。此文通过实例应用调查洪水成果对计算洪水进行验证,说明了选用洪水成果合理性、选用设计洪水成果安全可靠,为设计洪水计算提供坚实的数据支撑,也为工程安全运行提供可靠设计保证。     

Experimental research on air film formation behavior of air cushion belt conveyor with stable load

In this paper, the air film formation behavior of air cushion belt conveyor with stable load is studied. The air cushion field is analyzed by means of theoretical derivation, numerical simulation and experimental research. An intelligent experiment platform is developed. Three dimensional pressure distribution of air film and the air film thickness distribution along the conveyor belt in the width direction are obtained. The experimental result is analyzed by comparing with theoretical calculation and numerical simulation. The numerical and theoretical results are in good agreement with those obtained from experiments. The air film formation behavior pattern of air cushion belt conveyor with stable load is presented. The optimized film thickness and pore distribution are obtained based on the comprehensive energy consumption. This study provides a basis for the optimization design of air cushion belt conveyor.     

Disruption of Synechocystis PCC 6803 for lipid extraction

In order to extract intracellular lipids from cyanobacterial Synechocystis PCC 6803 for biofuel production, seven cell-disruption methods - autoclaving, bead beating, freeze drying, French press, microwave, pulsed electric fields (PEF), and ultrasound - were tested prior to lipid extraction to make intracellular lipids more accessible by organic solvents. The different methods brought about distinct disruption effects to the cell envelope, plasma membrane, and thylakoid membranes that were related to extraction efficiency. Microwave, PEF, and ultrasound with temperature control had significant enhancement of lipid extraction (9-13% increases). Bead beating, freeze drying, and French press did not provide significant enhancement of lipid extraction. Furthermore, autoclaving, French press, and ultrasound treatments caused significant release of lipid into the medium, which may increase solvent usage and make medium recycling difficult. In order to minimize the cost of cell-disruption and lipid-extraction steps, microwave and PEF (with temperature control) might be best suited for large-scale cell disruption among all techniques investigated.     

单通道TD-SCDMA射频拉远单元

该文设计了一种单通道TD-SCDMA射频拉远单元。首先根据系统要达到的性能指标要求,设计了系统拓扑结构,接着从该系统拓扑结构出发,分析了整个系统的设计思路及实现方案,选择相应的电路模块。测试结果表明设计的系统达到了预期的指标,临近通道功率比小于-40.64 dBc和误差向量幅度为5.08%rms。     

毛泽东的社会主义发展阶段思想与社会主义初级阶段理论

毛泽东在领导中国人民探索建设社会主义的过程中，对社会主义发展阶段问题进行了深入的思考，提出了许多重要的思想。这些宝贵的思想成为我们党形成社会主义初级阶段理论的思想来源之一。探讨毛泽东与社会主义初级阶段理论的关系，有助于我们加深理解毛泽东思想及其和邓小平理论之间的渊源关系。     

罗冰生:优化钢铁工业结构推进增长方式转变

在7月31日召开的中国钢铁工业协会二届七次常务理事(扩大)会议上,中国钢铁工业协会常务副会长兼秘书长罗冰生作了题为《优化钢铁工业结构,推进增长方式转变》的工作报告。报告分析了今年上半年钢铁行业运行情况和下半年钢铁行业发展态势。     

Interpreting the Good Life: Growth Memories in the Lives of Mature, Happy People.

In 2 studies, the authors examined autobiographical memories for the presence of 2 growth orientations that were expected to correspond differentially to maturity and well-being, which are considered to be key facets of "the good life" by L. A. King (2001). Mature participants emphasized integrative memories (conceptual integration and learning), whereas happy participants emphasized intrinsic memories (humanistic concerns). Both kinds of growth memories correlated more strongly with eudaimonic than with hedonic measures of well-being. Growth memories were largely independent of Big Five traits in relation to maturity and well-being. Finally, older participants were more likely than younger participants to have greater maturity (marginally) and well-being, but this was in part explained by older participants' greater tendency to have growth memories. The discussion considers the role of growth memories in the intentional cultivation of the good life. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

建立液压系统信息模型的研究

所设计的液压系统信息模型将液压系统分作系统、元件和油口3个层次，以多层链表的方式将其连接起来，能简单地与液压系统一一对应。而使用液压系统信息模型的整个仿真系统也分为3层，以信息模型为核心，向上层映射为数学模型，向下层映射到数据库。研究结果表明：所采用的体系结构弹性足，构造灵活，不但能满足液压仿真的需要，而且对系统的扩展性、对多方应用间信息集成都有着良好的支持。     

高性能混凝土配合比设计的试验研究

从对HPC组成、结构的认识出发，借鉴利用拨开系数求砂率的方法，提出了一种新的HPC配制方法，并通过试验证实该方法是完全可行的．     

Wear behavior of graphite studies in an air-conditioned environment

The wear performance of graphite used in the high-temperature gas-cooled reactor (HTR-10) was researched. The wear mechanism, worn surface and wear debris were analyzed under SEM. Under test conditions, the wear rate was 2.27×10⁻⁷ g/m for surface contact, and 1×10⁻⁶ g/m level for line contact. The main wear mechanisms of graphite were groove and fatigue. The projected area of wear debris followed the logarithm normal school, giving most wear debris as a small sphere and large flake debris as only a small part.