静脉输液结束呼叫监控系统设计

介绍了输液结束后的自动呼叫监控系统的硬件、软件。该系统的应用将大大提高了医院的护理水平。     

某型内燃机闭环控制减振的仿真研究

内燃机自身的振动是重型军用车辆主要的振动和噪声源,对其进行有效的振动控制十分重要.但由于内燃机系统结构的复杂性,研究其振动和噪声控制比较困难.针对某型内燃机系统,采用Matlab软件的Simulink工具,建立了整个系统的动力学仿真模型,并分别对该模型进行简谐、白噪声信号扰动下的减振控制研究,控制方法采用闭环数字PI策略.系统输出转矩和转速的曲线结果表明减振具有明显的效果.     

电子冷冻加工的特点与应用研究

针对采用热电制冷的冷冻加工方式的特点与应用进行了研究,对于特殊工件的加工提出了一种全新的加工方式,它改革了传统的工件夹持方法,为超小、超薄、异形、低强度脆性材料的工件的加工提供了一种可能,同时电子冷冻加工使低温加工成为现实,可解决一般常用材料及某些特殊材料的加工问题,特别适宜于薄片件,韧、粘性材料的加工,结构简单,温度可调,成本低,无粉尘和气味,可应用于各行各业的机械加工中.     

二氧化钛直接制取金属钛工艺简介

阐述了各种二氧化钛直接电解制取金属钛的工艺及其原理，指出了熔盐电解TiO2法在工业应用上存在的问题。     

ISA法铜电解槽槽面水平误差的控制

本文介绍了通过采用找平装置来控制ISA法铜电解槽槽面水平误差的方法,通过现场测量及工艺操作证明是行之有效的。     

Program Adaptation via Output-Constraint Specialization

In component-based software development, gluing of two software components is usually achieved by defining an interface specification, and creating wrappers on components to support the interface. We believe that interface specification provides useful information for specializing components. An interface may define constraints on a component's inputs, as well as on its outputs. In this paper, we propose a new approach to program specialization with respect to output constraints. We provide the form in which an efficient specialized program should be after such specialization, and consider a variant of partial evaluation to achieve it. In the process, we translate an output constraint into a characterization function for a component's input, and define a specializer that uses this characterization to guide the specialization process. We believe this work will broaden the scope of program specialization, and provide a framework for building more generic and versatile program adaptation techniques.     

SWP-LE智能流量积算控制仪的应用

本文主要介绍了SWP-LE系列表计的实用功能、工作原理及实际操作中的注意事项,论述了该表计在生产中的应用价值.     

阀门流场的数值模拟及流噪声的实验研究

采用非结构、非交错网格的有限体积法求解用二方程模型封闭的雷诺平均N S方程组 ,对水管路系统中 3种常见阀门的三维分离流动进行数值模拟。模拟结果表明 ,随着蝶阀、闸阀和球阀开度的减小 ,流体在蝶阀背面、球阀阀门内外分别形成两个方向相反的漩涡 ,闸阀的漩涡出现在挡板与管道的壁角处 ,并且漩涡在阀门下游逐渐消失。同时实验表明 ,阀门下游的流噪声大于阀门上游的流噪声 ,涡声是阀门噪声的主要来源     

Fluxing Agents on Ceramification of Composites of MgO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>/Boron Phenolic Resin

Fluxing agents of zinc borate, antimony oxide, galss frit A and glass frit B, with different melting or softening point temperatures, were added into MgO-Al₂O₃-SiO₂/boron phenol formaldehyde resin (MAS/BPF) composites to lower the formation temperature of eutectic liquid phase and promote the ceramification of ceramifiable composites. The effects of fluxing agents on the thermogravimetric properties, phase evolution, and microstructure evolution of MAS / BPF composites were characterized by TG-DSC, XRD and SEM analyses. The results reveal that the addition of a fluxing agent highly reduces the decomposition rate of MAS / BPF composites. Fluxing agents lower the formation temperatures of liquid phases of ceramifiable MAS / BPF composites obviously, and then promote the ceramification and densification process. The final residues of composites are ceramic surrounded by large amount of glass phases.     

对一类逆变器的数学模型和等效结构图的探讨

本文在特定条件下，通过对阶跃输入下ＦｖＲＯ１５Ｇ７Ｓ－４ＥＸ输出响应特性的分析和实际观测，提出了它的传递函数的数学模型和等效结构图。