ISA法铜电解槽槽面水平误差的控制

本文介绍了通过采用找平装置来控制ISA法铜电解槽槽面水平误差的方法,通过现场测量及工艺操作证明是行之有效的。     

Program Adaptation via Output-Constraint Specialization

In component-based software development, gluing of two software components is usually achieved by defining an interface specification, and creating wrappers on components to support the interface. We believe that interface specification provides useful information for specializing components. An interface may define constraints on a component's inputs, as well as on its outputs. In this paper, we propose a new approach to program specialization with respect to output constraints. We provide the form in which an efficient specialized program should be after such specialization, and consider a variant of partial evaluation to achieve it. In the process, we translate an output constraint into a characterization function for a component's input, and define a specializer that uses this characterization to guide the specialization process. We believe this work will broaden the scope of program specialization, and provide a framework for building more generic and versatile program adaptation techniques.     

SWP-LE智能流量积算控制仪的应用

本文主要介绍了SWP-LE系列表计的实用功能、工作原理及实际操作中的注意事项,论述了该表计在生产中的应用价值.     

阀门流场的数值模拟及流噪声的实验研究

采用非结构、非交错网格的有限体积法求解用二方程模型封闭的雷诺平均N S方程组 ,对水管路系统中 3种常见阀门的三维分离流动进行数值模拟。模拟结果表明 ,随着蝶阀、闸阀和球阀开度的减小 ,流体在蝶阀背面、球阀阀门内外分别形成两个方向相反的漩涡 ,闸阀的漩涡出现在挡板与管道的壁角处 ,并且漩涡在阀门下游逐渐消失。同时实验表明 ,阀门下游的流噪声大于阀门上游的流噪声 ,涡声是阀门噪声的主要来源     

Fluxing Agents on Ceramification of Composites of MgO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>/Boron Phenolic Resin

Fluxing agents of zinc borate, antimony oxide, galss frit A and glass frit B, with different melting or softening point temperatures, were added into MgO-Al₂O₃-SiO₂/boron phenol formaldehyde resin (MAS/BPF) composites to lower the formation temperature of eutectic liquid phase and promote the ceramification of ceramifiable composites. The effects of fluxing agents on the thermogravimetric properties, phase evolution, and microstructure evolution of MAS / BPF composites were characterized by TG-DSC, XRD and SEM analyses. The results reveal that the addition of a fluxing agent highly reduces the decomposition rate of MAS / BPF composites. Fluxing agents lower the formation temperatures of liquid phases of ceramifiable MAS / BPF composites obviously, and then promote the ceramification and densification process. The final residues of composites are ceramic surrounded by large amount of glass phases.     

对一类逆变器的数学模型和等效结构图的探讨

本文在特定条件下，通过对阶跃输入下ＦｖＲＯ１５Ｇ７Ｓ－４ＥＸ输出响应特性的分析和实际观测，提出了它的传递函数的数学模型和等效结构图。     

叶轮式分级机的环隙对分级性能的影响

有关环隙对叶轮式超细分级机性能的影响研究尚未有公开发表的资料,本文在这方面做了一些初步的实验研究。实验研究发现：环隙对分级性能的影响很大,把环隙作为调控参数很有前途。     

4A和13X分子筛去除水中重金属Cd2＋及其吸附性能研究

以4A和13X分子筛为吸附材料,考察废水pH值和Cd2＋初始浓度等对Cd2＋去除率的影响,并研究了分子筛对Cd2＋的吸附性能。结果表明,4A和13X分子筛投加量为0．16 g/L、废水pH值为5、Cd2＋浓度为20 mg/L时,Cd2＋去除率达到95％以上;分子筛对Cd2＋的去除机理以离子交换吸附为主,交换出来的Na＋与分子筛吸附的Cd2＋摩尔浓度比为2;在吸附热力学和动力学方面,4A和13X分子筛均符合Langmuir吸附等温模型和Lagergren二级速率方程,计算的饱和吸附容量 Q0分别为150．15、163．67 mg/g ,二级反应速率常数K2分别为2．45＆#215;10-3、3．96＆#215;10-4 g/（mg ＆#183; s）。该吸附反应是一种单分子层反应速度较快的化学吸附过程。     

流动与传热数值模型的发展现状

流动与传热的数值模型发展至今已有三十多年的历史 ,该文拟结合炉内流动模型的特点 ,从差分格式、迭代组织形式、网格生成等三方面对流动、传热数值方法的发展现状作一简单介绍。参 9     

人事档案管理CAD

在对基层组织人事档案管理现状分析的基础上，提出了人事档案管理计算机辅助系统的设计目的及任务，并介绍了系统的结构及主要功能。