Droplet de-entrainment by inertial impaction on vertical rods in an air-droplet mixture flow

We experimentally investigate the de-entrainment of droplets by inertial impaction on an array of vertical rods in an air-droplet mixture flow. The de-entrainment efficiencies are measured for a single rod, for a single row of rods, and for a multi-row of rods. We investigate the effects of the droplet mass flux (0.5–5.4 kg/m² s), the droplet Weber number (3000–8000), the air velocity (0–6 m/s), the rod geometry, and the surface roughness on the de-entrainment, and the rod diameter-to-pitch ratio effect on the de-entrainment. The results for a single rod show that the de-entrainment efficiency decreases slightly as the droplet mass flux increases; however, in our experimental ranges, there is negligible dependence on the droplet Weber number, the air velocity, and the surface roughness. The rod geometry affects the de-entrainment efficiency. The results for a single row of rods show that the existence of neighboring rods promotes de-entrainment due to droplet splashing, and we develop a correlation to show the effect of diameter-to-pitch ratio on the de-entrainment. Using information on the de-entrainment efficiencies of a single rod and those of a single row of rods, we propose a correlation that predicts the de-entrainment efficiency for a multi-row of rods with a staggered array. The RMS errors of the correlation from the de-entrainment efficiencies experimentally obtained are within 13.5%.     

新生牛肝活性肽的制备及其毒性检测

目的制备新生牛肝活性肽并评价其安全性。方法采用膜法分离制备新生牛肝活性肽。将3批制品于37～40℃,75%相对湿度条件下存放3个月,以多肽含量为指标观察其稳定性,并进行急性毒性试验、小鼠骨髓细胞微核试验、Ames试验、小鼠精子畸形试验和大鼠喂养试验。结果制备的3批新生牛肝活性肽存放3个月后,多肽含量无明显下降,质量稳定。小鼠和大鼠经口灌人大于20.0g/kg体重的新生牛肝活性肽,均无急性毒性。3种致突变试验均未显示出致突变性,大鼠喂养试验各项指标均未见明显毒性。结论新生牛肝活性肽未表现出明显毒性。     

辐射制备缓释抗癌药阿糖胞苷的研究

报告了甲基丙烯酸酯类在室温下进行辐射聚合制备缓释抗癌药阿糖胞苷（Ａｒａ－Ｃ）的研究结果。结果表明，不仅亲水性单体，而且疏水性单体（包括ＭＭＡ、ＥＭＡ和ＢＭＡ等）都可用于辐射固化。加入到亲水性基质中的疏水性单体可以延缓药物的离体释放，其顺序是ＭＭＡ＜ＥＭＡ＜ＢＭＡ，央ＭＭＡ－ＨＥＭＡ共聚物中，Ａｒａ－Ｃ释放率随着基质中的ＭＭＡ含量增加而降低。药物的离体释放还受许多困素的控制，结果显示：药物释放量随着     

2～12GHz GaAs单片行波放大器

报道了一个全平面超宽带ＧａＡｓ单片行波放大器的研究结果。该单片电路的核心部件是四个３００μｍ栅宽的ＭＥＳＦＥＴ，整个电路拓扑结构简单，芯片面积为３．０ｍｍ×１．８ｍｍ。电路经优化设计后在２～１２ＧＨｚ范围内，小信号增益为５±１ｄＢ，输入输出电压驻波比≤１．７５。上述频率范围内输出功率≥１６ｄＢｍ，噪声系数≤８ｄＢ。采用全离子注入、全平面工艺，均匀性、一致性良好。实验结果与设计预计值十分一致。     

微波BJT超宽带低噪声放大器的设计

本文给出了一种频带覆盖达１０－１６００ＭＨｚ的微波ＢＪＴ超宽带低噪声放大器的设计方法，从微波ＢＪＴ的噪声模型出发，通过拟合５０Ω源阻抗下微波ＢＪＴ的噪声系数ＮＦ５０和Ｓ参数来提取其噪声参数，然后根据增益，噪声及驻波比要求优化设计放大器，使放大器在超宽带范围内获得平坦增益和低噪声，本文所给出的微波ＢＪＴ惨数提取及放大器优化设计方法已由实验结果所验证。     

介质加载圆柱腔的场分析

本文应用严格场匹配法解决了介质加载圆柱腔的本征问题，计算了圆柱腔在纵向部分填充介质后ＴＥ０１ｎ模和ＴＭ０１ｎ模的本征频率和本征场型的变化。特别分析了本征模式在空气段为截止模的情况。本文的分析方法亦可应用到纵向部分填充介质的传输线和其它形状的谐振腔。     

Effective single-band Hamiltonian for electron-phonon coupling in cuprate superconductors

We derive an effective single-band Hubbard type Hamiltonian for CuO₂ planes. The Hamiltonian includes both electron-electron repulsion and electron-phonon coupling to oxygen vibrational modes. We start with first-principles density functional theory parameters and then map onto a single-band model. Unlike previous mappings to a single-band Hamiltonian, ours explicitly preserves the Fermi surface shape and matrix elements of the many-band Hamiltonian. We consider both in-plane oxygen breathing modes as well as out-of-plane tilting modes. The latter modes have a quadratic electron-phonon coupling, and are also highly anharmonic in La₂CuO₄ based superconductors. The coupling to breathing modes is too small to account for highT _c, while the coupling to quadratic modes is much stronger even though they would be neglected in a standard Migdal-Eliashberg approach to superconductivity.     

用稳态反饱和吸收法测量C_（60）的激发态吸收截面

用准连续激光实现了Ｃ６０的稳态反饱和吸收，通过实验和理论计算的拟合，确定了Ｃ６０的三重第一激发态吸收截面。     

白丰梯级水库实用电力优化调度图的研制——变动目标水位控制法的研究

在分步设计及大量计算的基础上，提出了一套考虑因素相对全面、指导 性强、易于操作的梯级水库电力实用优化调度图。该调度图继承了传统时历法调度图直观、 简明的优点，又具有其特有的优化功能。该方法以汛末蓄满水库为标准，确定典型来水过程 的预调度线和初始目标；以获得梯级电站最大长期调峰收益为目标，以变动目标水位控制为 核心，开发出调度图长系列操作通用程序模块，并以此模块作为寻优计算的手段。提出了水 库长期运行与短期实时调度有机结合，以及模拟计算、水位偏差最优反馈、来水预报、目标 水位寻优等多种实用处理技术。