An Optimized Content-Aware Authentication Scheme for Streaming JPEG-2000 Images Over Lossy Networks

This paper proposes an optimized content-aware authentication scheme for JPEG-2000 streams over lossy networks, where a received packet is consumed only when it is both decodable and authenticated. In a JPEG-2000 codestream, some packets are more important than others in terms of coding dependency and image quality. This naturally motivates allocating more redundant authentication information for the more important packets in order to maximize their probability of authentication and thereby minimize the distortion at the receiver. Towards this goal, with the awareness of its corresponding image content, we formulate an optimization framework to compute an authentication graph to maximize the expected media quality at the receiver, given specific authentication overhead and knowledge of network loss rate. System analysis and experimental results demonstrate that the proposed scheme achieves our design goal in that the rate-distortion (R-D) curve of the authenticated image is very close to the R-D curve when no authentication is required     

硫酸铈和磷酸处理对铌酸表面酸度及催化活性的影响

用硫酸铈和磷酸对固体铌酸进行了表面处理。表面酸度和TG DTA测定结果表明 ,与未处理的固体铌酸相比 ,处理后表面强酸量提高 3～ 5倍 ,耐受温度由 30 0℃提高到 5 0 0～ 6 0 0℃。用于催化酯化合成二甘醇二苯甲酸酯增塑剂 ,处理后固体铌酸的催化活性和重复使用寿命有明显提高。     

矿石中金的快速测定

研究了活性炭纤维滤布富集分离的条件和解脱方法,并利用微波溶样、液珠萃取比色法测定矿石中的金。该方法的测定范围为(0.5~xx)×10-6,相对标准偏差RSD为3.2%,可用于矿石中金的野外快速测定。     

Failure loads for notched graphite/epoxy laminates with a softening strip

The strengths of two graphite/epoxy notched laminate systems with a softening strip were investigated. The softening strip was created by replacing the 0°-graphite/epoxy plies by a glass/epoxy composite. Experimental results indicated that the use of softening strips could significantly increase the laminate strength. Analysis was performed with finite elements developed using the classical laminated plate theory and was shown to be adequate. A simple point-stress failure criterion was used to predict the strength of notched laminates with softening strips and the result was found to be satisfactory.     

面向对象的程序设计语言CLUSTER86的设计与实现

本文介绍了笔者设计并实现的一种新型的面向对象的程序设计语言,着重讨论了在设计过程中采用的新的概念,并和其它类似语言作了比较.     

用单透镜变换由多模光纤出射的大功率Nd：YAG激光束的特性

根据理论假设，通过选取单透镜的参数和位置，计算说明了单透镜使经由多模光纤出射的大功率Ｎｄ：ＹＡＧ激光束的发射角压缩，光束聚焦效率提高，光束截面场为高斯分布；文中的计算结果符合已知规律，从而说明了理论假设的正确性。     

CIMSCLASS─—面向CIM的零件分类软件开发工具

介绍了一个能为工厂设置零件编码系统和开发零件分类系统的工具系统。该系统能适应用户的具体环境，能对零件的特征信息做较详细的描述和建立相应目标的零件分类系统，从而能在ＧＴ（成组技术）基础上为机械加工零件开发ＣＡＤ／ＣＡＰＰ／ＣＡＭ集成系统提供支持，以满足ＣＩＭＳ的需要。     

Effect of dual-scale microstructure on the toughness of laminar zirconia composites

Numerical study by the finite element method (FEM) is performed to investigate the effect of dual-scale microstructure on the toughness of laminar zirconia composite. The computation is based on the micromechanics constitutive model of polycrystal transformation plasticity developed by Sun et al. [10] where both transformation induced shear and softening effects during autocatalytic transformation are taken into account. The numerical simulation presented in this paper successfully reproduced the experimentally observed two effects of the dual-scale microstructure on the toughness of laminar zirconia composite, i.e., the truncation of the elongated transformation frontal zone that forms in single phase Ce-ZrO₂ and the propagation of the transformation zone along the layers normal to the crack plane. Quantitative analysis on the role of microstructure in transformation toughening of laminar zirconia composite is first carried out in the present work which will provide a starting point for the microstructural design of this novel advanced composite in the future.Presented at the Far East Fracture Group (FEFG) International Symposium on Fracture and Strength of Solids. 4–7 July 1994 in Xi'an, China.     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

套管固井质量问题及对策分析

从油田现场反应的情况出发，对调整井固井，尾管固井，大位移井套管固井和其他固井的质量问题进行了分析，针对各种问题产生的原因，提出了相应换解决办法。