企业中层管理人员培训的思考

以分析企业中层管理人员培训的现状为突破口,阐述了中层管理人员培训需求分析的思路和方法。在此基础上对培训内容进行整体设计,指出针对此类培训应采用的培训方式和评估方法。以期对企业中层管理人员的培训起到一些启发和借鉴作用。     

硫化氢吸收液的电化学分解条件研究

理想的脱硫工艺应满足体积小、费用低、净化度高、无二次污染等要求。在碱性溶液吸收微量硫化氢时同步进行电解，可有效减小设备体积，并将硫化氢转变为氢气和硫磺，不产生恶性气味。为此，实验研究了温度、浓度、电流密度、pH值等因素对电解阳极过程的影响，确定了适宜的电解条件，并在该条件下进行了吸收实验。结果表明，在最佳电解条件下，硫化钠溶液能充分吸收天然气中经变压吸附提浓的硫化氢（800 mg/m³），吸收率大于99.9％。     

用CMOS工艺实现VSR光电集成接收机的途径

介绍了10Gbit／s速率的甚短距离光传输系统VSR(Very Short Reach)中的接收机。分析了几种有希望用于VSR系统的CMOS工艺兼容的光电探测器。提出用CMOS电路实现VSR光电集成(OEIC)接收机的可能性和实现方法。     

A Study on Turbo—rotor Multi—fault Diagnosis Based on a Neural Network

The multi-fault phenomena are common in the turbo-rotor system of a liquid rocket engine.As it has many excellent qualities,the neural network might be used to solve the problems of multi-fault diagnasis of a turbo-rotor system.First,the feature expression of a common turbo-rotor fault was studied in order to build up the standard fault pattern and satisfy the need of neural network studying and diagnosing.Then.the turbo-rotor fault identification and diagnosis problems were investigated by using a BP(back-propaga-tion)neural network.According to the BP neural network problems,the parallel BP neural network method of multi-fault diagnosis and classification was presented and investigated.The results indicated that the parallel Bp neural network method could solve the turbo-rotor multi-fault diagnosis problems.     

带通采样在数据采集中的应用研究

在数据采集中采用带通采样，可大大降低采样率，但系统中的抗混叠滤波器会造成相位的非线性。采用对滤波后的信号进行带通采样，然后再用FRR滤波器校正相位的非线性，从而不失真地还原原信号，最后在Matlab中进行仿真，验证了该方法的有效性。     

基于有限状态的全周期序列混沌映射的研究

在有限长度的数字计算机中，混沌迭代序列是一个有限周期序列，其相关性能远远低于理想序列。基于skew tent映射，提出一种离散化的有限状态混沌映射，它允许精确的数值计算，没有舍入误差，通过选择合适的参数，映射能产生全周期长度的序列。仿真实验表明，归一化的序列平均周期对计算机精度不敏感，生成的二进制序列具有良好的相关性能。     

Phase behavior,density, and crystallization of polyethylene in n‐pentane and in n‐pentane/CO2 at high pressures

The phase behavior and volumetric properties of polyethylene (PE) in solutions of n‐pentane and n‐pentane/CO₂ were studied in a temperature (T) range of 370–440 K at pressures up to 60 MPa. Measurements were conducted with a variable‐volume view‐cell system equipped with optical sensors to monitor the changes in the transmitted light intensity as the P or the T of the system was changed. Lower‐critical‐solution‐temperature‐type behavior was observed for all of the liquid–liquid (L–L) phase boundaries, which shifted to higher pressures in solutions containing CO₂. The solid–fluid (S–F) phase boundaries were investigated over a P range of 8–54 MPa and took place in a narrow T range, from 374 to 378 K in this P interval. The S–F phase boundary showed a unique feature in that the demixing temperatures showed both increasing and decreasing trends with P depending on the P range. This was observed in both the PE/n‐pentane and PE/n‐pentane/CO₂ mixtures. The density of these solutions were measured as a function of P at selected temperatures or as a function of T at selected pressures that corresponded to the paths followed in approaching the phase boundaries (S–F or L–L) starting from a homogeneous one‐phase condition. The data showed a smooth variation of the overall mixture density along these paths. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2201–2209, 2003     

有线网络行业垄断性的改变及竞争形势分析

有线网络行业既具有自然垄断性,又具有行政垄断性.但随技术进步和国家政策的调整,其自然垄断性被削弱,行政垄断也被打破.在位的有线网络企业面临着两个层面的竞争：一是基于不同视频传输方式的竞争,二是同为有线网络传输方式的竞争,而后者是直接的竞争.对有线网络行业的竞争进行了SWOT分析.最后讨论了竞争形势下在位的有线网络运营商的应对思路.     

炼油厂成品油罐区调度优化问题研究

研究了以集合论为基础的调度优化模型。给出了该离散型优化问题的求解算法。根据优化结果，在G2实时智能平台上开发了包含监视子系统和调度子系统的调度支持系统。在中国石化股份有限公司长岭分公司的试用结果表明，该调度系统可以提高炼油厂的生产效率，从而提高炼油厂的经济效益。     

Numerical Study of Finite Element Method Based Solutions for Propagation of Wetting Fronts in Unsaturated Soil

The accurate prediction of the propagation of a wetting front in an unsaturated soil subjected to surficial infiltration is of practical importance to many geotechnical and geoenvironmental problems. The finite element method is the most common solution technique as the hydraulic soil properties are highly nonlinear. Two important issues are often found to create difficulties in such analyses. First, numerical oscillations are usually observed in the calculated pore pressures at the wetting front. Second, when a reasonable mesh size and time step are used, the elevation of the wetting front may be seriously overpredicted. This paper is focused on the second issue. The under-relaxation (UR) technique used in the iterative process within each time step is found to have a serious impact on rate of convergence with refinement in mesh size and time step. Two different techniques are typically used; the first evaluates the hydraulic conductivity using an average of heads calculated from the preceding time node and the most recent iteration of the current time node (UR1), and the second evaluates the hydraulic conductivity using the average of heads calculated from the two most recent iterations of the current time nodes (UR2). The study shows that UR1, which is adopted in programs such as SEEP/W, ensures that the solution converges rapidly to a stable solution within a time step, but may converge to the wrong wetting front at a given elapsed time unless a sufficiently refined mesh is used. UR2 converges much more slowly within a time step, but the error in the wetting front is smaller than that generated by UR1.