多线程技术在嵌入式数据采集系统中的应用

讨论了多线程技术在嵌入式数据采集系统中的应用，给出了PC机与嵌入式计算机系统的多线程串行通信的实现。     

基于自适应模糊控制器的氧枪冷却水系统

针对炼钢厂水站系统中的氧枪枪位控制，设计了一种自适应模糊控制器。根据控制器输出误差在线调整参数，并按照氧枪枪位随流量变化的规律进行连续调节，给出相应的自适应算法。以实时修正模糊规则。从而确定了每一炉各个阶段氧枪的基本枪位，改变了原系统水泵长期伞速运行造成严重能耗损失的状况。仿真结果表明：自适应模糊控制器能适应流量的变化，使氧枪枪位在整个炉役期都能处于最优的位置，改善了系统性能。     

WatchDog失效机理与对策研究

在工业控制领域,程序的失效恢复问题是一重要而棘手的问题,一般采用方法是在程序正常运行必然要经过的地方安插WatchDog复位指令,当遇到程序死锁、跑飞等程序失效问题时,启动WatchDog,使程序恢复正常。但WatchDog并非绝对安全,常常失去有效性,使系统瘫痪。本文对WatchDog失效机理与对策做了一些探讨,并结合工程应用给出了几款有效的硬件WatchDog电路。     

新型特洛伊木马技术的研究

本文对特洛伊木马技术所采用的方法进行了分析,介绍了木马程序在植入、加载、隐藏以及在通信方面所采用的方法。在此基础上,分析如何基于动态链接库(DLL)和端口反弹木马技术实现木马程序。最后,给出了防范木马入侵的一般方法。     

撞击式浓淡分离器与弯头组合数值模拟研究

煤粉浓淡燃烧技术在稳燃、防结渣、低NOx排放等方面具有良好的性能,近年来得到了广泛应用。四角切圆锅炉的煤粉管道一般在燃烧器前有弯头,利用数值模拟的方法,分析了撞击式浓淡分离器与弯头间的相互影响,计算了不同弯头与浓淡分离器组合形式下,管道内的流场和煤粉颗粒浓缩效率。     

Modeling of the Electrostatic (Plasmon) Resonances in Metallic and Semiconductor Nanoparticles

Plasmon (electrostatic) resonances are treated as an eigenvalue problem for specific boundary integral equation. This leads to direct calculation of resonance values of permittivity and resonance frequency. The technique is illustrated by numerical examples of calculation of resonance frequencies for 3D nanoparticles.     

Integrated Evaluation and Its Application on Decision-Making of Comprehensive Transportation Projects

The comprehensive transportation project involves with many different transportation methods, such as railway, highway, waterway, airline, and pipeline, which have their special characteristics. To evaluate the transportation project with different transportation methods under the same system, the integrated evaluation method should be built up on the basis of a common index system. This paper suggests a feasible integrated evaluation method including index system establishing, indices transacting, the index weight distributing, and weighted value integrating.     

Characterization of Hydroxyapatite Film on Titanium Substrate by Sputtering Technique

Radiofrequeut magnetron sputtering technique was used to produce calcium phosphate coated on the titurdum substrates, and the sputtered coating films were crystallized in an autoclave at 110℃ using a low temperature hydrothermal technique. The crystallization of as-sputtered coating film on the titanium substrates were amorphous calcium phosphate film. However, after the hydrothermal technique, calcium phosphate crystals grew and these were cohumnar crystal. The Ca/P ratio of sputtered coating films in 1.6 to 2.0.     

BZT系列固溶体直接湿化学法的合成与表征

在95 ℃下用直接湿化学法,合成了系列BaTi1-xZrxO3固溶体粉体,XRD物相分析表明,产品为完全互溶取代固溶体,SEM和AFM观察,粒子为均匀球形,粒径大约为250 nm,BZT固溶体晶相均为立方相.且分析了产品合成的影响因素,初步探讨了锆钛酸钡直接湿化学法合成机理.     

基于S0lidWorks的三维参数化国标注塑模架库的开发

介绍了使用 SolidWorks 进行二次开发的关键技术,并对模架图形库及数据库的建立方法进行了研讨。以 SolidWorks 为平台,利用 API 和 DLL 技术,使用面向对象的语言 VB 开发了三维国标注塑模架库,通过尺寸驱动,实现了模架的参数化设计,旨在提高模具的设计效率。