Preparation and characterization of linear low‐density polyethylene/low‐density polyethylene/TiO2 membranes

Because of their special functions, the application of nanoscale powders has recently attracted both industrial and theoretical interest. In this study, nanoscale TiO₂, which exhibited a special UV absorption and consequent antibacterial function, was added to a low‐density polyethylene/linear low‐density polyethylene hybrid by melt compounding to yield functional composite membranes. TiO₂ exhibited an apparent induced nucleation effect on the crystallization of polyethylene, and the size of the crystallites decreased while the number increaed with the introduction of TiO₂; however, the crystallinity of polyethylene changed little. Also, TiO₂ exhibited an ideal dispersion in the membrane with an average size less than 100 nm, and this excellent dispersion provided the membranes extra UV absorption; moreover, the transparency of the membranes was maintained to satisfy common requirements. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 216–221, 2005     

人脸识别在远程登录中的应用

介绍了远程登录中使用人脸进行身份验证的方法,讨论了系统结构和关键技术,给出了实验结果．此方法采用奇异值分解和判别式KL投影提取特征,利用类内平均距离作为验证依据,适用于人脸样本数量不是很大的情况．实验证明,该系统具有较好的应用效果。     

多视无人机影像环形拼接算法

由于多视无人机影像拼接时误差的传播和累计经常导致拼接图扭曲偏斜或者拼接的失败.针对这个问题提出了构建拼接环并以多级拼接作为辅助的拼接策略.首先将待拼接图像分为多组,每组中以环形方式进行拼接,然后利用SIFT进行匹配,RANSAC实现误匹配的去除,而后计算透视变换关系,最后通过平差方程将误差削弱.通过实拍无人机影像进行的拼接实验表明该方式可以有效减少累计误差的影响,提高拼接精度.该方法的提出可以作为影像拼接消除累计误差的有效方式之一.     

Influence of static pre-loading on the dynamic bending strength of concrete with particle element modeling

Experimental tests show that static pre-loading has a significant effect on the dynamic strength of concrete.Based on meso-scale particle element model,numerical simulations of dynamic bending tests with pre-loading are performed.Complete stress–strain relationships are then obtained.Significant increase in dynamic strength is found when the pre-loadings are imposed within the elastic limit of concrete.However,when the imposition of pre-loadings reaches the plastic or softening range,dynamic strengths may gradually decrease along with the increase in pre-loadings.The distribution of energy components and the failure modes are discussed to explain the mechanisms of the phenomena.     

本科生导师制激励问题研究

运用博弈论的分析方法解释本科生导师制在推行过程中遇到的激励问题。通过构建一个非对称信息的静态模型,发现导师指导学生的努力程度将取决于学校的惩罚力度、考核成本以及该制度给学校带来的收益,而学校对教师指导情况的考核概率则主要受到其制定的奖惩规则和教师科研水平的影响。     

Engineering all-aromatic polyamide surface from hydrophilic to superhydrophobic and the accelerated strategy

Being a new kind of nanomaterials, aromatic polyamide nanofibers (ANF) have been much highlighted in recent studies. We here demonstrate an isopropyl alcohol (IPA) accelerated chemical cleavage on poly (p-phenylene terephthalamide) chopped fibers, which provides an efficient preparation method of ANF. The comprehensive study on the processes accelerated by different alcohols revealed that the preparation time of ANF in the mixed medium of dimethyl sulfoxide (DMSO)-alcohol (20:1 in volume) was shorten to 45 min and 75 min for methanol (ethanol) and isopropanol, respectively. However, the nanofibers prepared in DMSO-IPA exhibited the minimum in axial and radial dimensions, providing the finest and most uniform diameter of 16 nm. The corresponding ANF films through vacuum assisted filtration also showed the highest tensile strength of 150 MPa, in comparison with those of the ANF films prepared using other alcohols, which were about 110 MPa. Furthermore, ANF/silicon hybrid films were prepared by the ionic ring-opening reaction followed by the alkoxysilane condensation and nanoparticle fabrication. By changing the organo functional groups in the alkoxysilane, the surface of the films were adjustable in a wide contact angle range from 56° (hydrophilic) to 150° (superhydrophobic), suggesting the amendable interfacial properties potential applicable to composite fabrication with most of the resin matrix.     

激光快速成形Rene′88DT高温合金的时效强化研究

研究了时效时间对激光快速成形后时效硬化镍基高温合金Rene′88DT中沉淀相组织演化和力学性能的影响。发现随时效时间的增加，沉淀相y’略有长大，颗粒之间发生大颗粒吞噬小颗粒的粗化，时效40h后沉淀相颗粒粗化明显。对经不同时间时效后的激光快速成形Rene′88DT试样进行了硬度测试。结果显示，在时效时间为28h时，硬度有一峰值HRC49。在此基础上，采用1165℃，2h固溶、空冷＋760℃，28h时效的热处理工艺对激光快速成形标准拉伸棒样进行了热处理，拉伸结果显示成形件的抗拉强度较激光沉积态提高了400MPa，屈服强度接近同种材料的粉末锻造水平。