探索物联网人才培养模式

物联网在众多领域有着广泛的应用,产业空间巨大。物联网人才的培养变的尤为重要。根据国家和东莞经济结构的调整及发展战略,本着服务地方经济的理念,调整高等院校的专业方向和专业结构;根据社会经济的需要和安排,制订高等院校的专业人才培养方案和课程标准;根据地方经济环境,建设物联网专业,培养企业需求的人才。     

基于多波束合成孔径声呐的三维场景构建仿真研究

多波束合成孔径声呐(Multibeam Synthetic Aperture Sonar)是一种新型的图像声呐,具有独特的阵列结构,兼具合成孔径声呐与多波束测深声呐的优点。本文为了满足多波束合成孔径声呐仿真的需求,提出了一种基于延时表和阴影区的多波束合成孔径声呐的三维场景构建仿真模型。此仿真模型在点目标的基础上,根据延时表算法的基础上构建三维数据仿真模型,并通过阴影区算法模型添加不同波束照射下目标区域的阴影区域。点目标和体目标的仿真数据结构表明了此仿真模型的可行,可以为多波束都合成孔径声呐的信号处理、目标识别、测深成像绘图提供有力的支持。     

Effect and Evolution of Oxide Film in the HDH-Ti Powder Surface on Densification Behavior During Sintering

Metallurgical and Materials Transactions A - In this work, we used hydride-dehydride Ti (HDH-Ti) powders (with the oxygen levels of 0.17 and 0.51 wt pct, respectively) combined with microstructural...     

Mold-filling characteristics of AZ91 magnesium alloy in the low-pressure expendable pattern casting process

The magnesium (Mg) alloy low-pressure expendable pattern casting (EPC) process is a newly developed casting technique combining the advantages of both EPC and low-pressure casting. In this article, metal filling and the effect of the flow quantity of inert gas on the filling rate in the low-pressure EPC process are investigated. The results showed that the molten Mg alloy filled the mold cavity with a convex front laminar flow and the metal-filling rate increased significantly with increasing flow quantity when flow quantity was below a critical value. However, once the flow quantity exceeded a critical value, the filling rate increased slightly. The influence of the flow quantity of inert gas on melt-filling rate reveals that the mold fill is controlled by flow quantity for a lower filling rate, and, subsequently, controlled by the evaporation of polystyrene and the evaporation products for higher metal velocity. Meanwhile, the experimental results showed that the melt-filling rate significantly affected the flow profile, and the filling procedure for the Mg alloy in the low-pressure EPC process. A slower melt-filling rate could lead to misrun defects, whereas a higher filling rate results in folds, blisters, and porosity. The optimized filling rate with Mg alloy casting is 140 to 170 mm/s in low-pressure EPC.     

基于Visual Basic 开发机床主传动非常规变速系统的设计--重复转速的传动系统(实例之二)

本文介绍利用Visual Basic工具开发金属切削机床主传动非常规变速系统的设计总体结构，功能和方法，以重复转速的传动系统为例，重点介绍转速图的拟定过程，本系统具有界面美观，操作方便，易于理解的特点。     

基于FVM格式的二维水动力学模型在河道整治工程流态分析中的应用研究

本文基于有限体积单元格式(FVM格式)建立河道二维水动力模型,并将模型用于河道整治工程流态分析计算中,此外结合断面实测水位和流速数据对构建模型进行验证。研究结果表明:基于FVM格式的浅水二维水动力模型适用于非恒定流的流态计算,计算的断面水位和流速与实测值之间的绝对误差值分别在0.08―0.46m和0.3―2.3m/s之间,相关系数均在0.6782―0.7845之间;相比于整治前,整治后的河道断面流速有所减小,断面过流能力相应增加,有助于区域防洪安全。研究成果对于河道整治工程后防洪影响评价流态分析计算提供方法参考。     

外加电流阴极保护在海水冷却槽中的应用

论述了金属的电化学腐蚀和外加电流阴极保护原理。说明对以海水为介质的冷却、冷凝设备,采用外加电流阴极保护是防止设备腐蚀的有效方法。举例说明了应用效果。     

进口刀盘圆环失效原因及改进

首先从材料力学角度分析了抚顺石化公司干法腈纶装置原进口切断刀盘圆环失效的原因 ,认为此种切断刀盘圆环系二维增强结构层压板 ,层间没有纤维增强 ,需要解决由二维增强向三维增强的过渡。给出了改进办法 ,寻求到三维增强的替代材料。同时介绍了机械加工测试及在线实验     

H∞ filtering for discrete-time systems subject to stochastic missing measurements: a decomposition approach

This paper deals with the problem of H_∞ filtering for discrete-time systems with stochastic missing measurements. A new missing measurement model is developed by decomposing the interval of the missing rate into several segments. The probability of the missing rate in each subsegment is governed by its corresponding random variables. We aim to design a linear full-order filter such that the estimation error converges to zero exponentially in the mean square with a less conservatism while the disturbance rejection attenuation is constrained to a given level by means of an H_∞ performance index. Based on Lyapunov theory, the reliable filter parameters are characterised in terms of the feasibility of a set of linear matrix inequalities. Finally, a numerical example is provided to demonstrate the effectiveness and applicability of the proposed design approach.