高碳铬铁电炉高基质干式打结料的研究

通过对组成打结料成分特性的研究，提出以优质原料生产的MgO-CaO-Fe2O3系合成砂为骨料，用MgO〉97％，粒度〈0．088mm烧结镁砂做细粉，适当添加超微粉等工艺措施，制成适当高碳铬铁电炉炉底用的高基质打结料，通过调控基质成分，实现材料相和固相的复合烧结。     

Optimal Conditions for Preparing Ultra-Fine CeO2 Powders in A Submerged Circulative Impinging Stream Reactor

Cerium carbonate powders were produced in a submerged circulation impinging stream reactor (SCISR) from Ce(NO3)3·6H2O. NH4HCO3 was used as a precipitant in the reaction. Cerium carbonate powders were roasted to produce ultra-fine cerium dioxide (CeO2) powders. The optimal conditions of such production process were obtained by orthogonal and one-factor experiments. The results showed that ultra-fine and narrowly distributed cerium carbonate powders were produced under the optimal flowing conditions. The concentrations of Ce(NO3)3 and NH4HCO3 solutions were 0.25 and 0.3 mol·L-1, respectively. The concentration of PEG4000 added in these two solutions was 4 g·L-1. The stirring ratio, reaction temperature, feeding time, solution pH, reaction time and digestion time were 900 r·min-1, 80 ℃, 20 min, 5～6, 5 min and 1 h, respectively. The final product, CeO2 powders, was obtained by roasting the produced cerium carbonate in air for 3 h at 500 ℃. The finally produced CeO2 powders were torispherical particles with a narrow size distribution of 0.8～2.5 μm. The crystal structure of CeO2 powders belonged to cubic crystal system and its space point group was O5H-FM3M. Under optimal conditions, powders produced by SCISR were finer and more narrowly distributed than that by Stirred Tank Reactor (STR).     

军械调运方案优化算法的设计与仿真

军械调运问题的数学模型和手工算法过去已有研究,但是当问题较为复杂时,手工算法就要花费大量时间而且准确性也难以保证。针对这一缺陷,本文在已有的数学模型和手工算法的基础上,设计了一种可以用计算机实现的基于递归的算法来寻求军械紧急调运问题的最优方案,并使用面向对象的java语言将算法实现。     

Flow time measurements for underfills in flip-chip packaging

Flow time is a key material property for underfill materials in flip-chip applications. In this paper, we will discuss how to use flow time testing for underfill flow evaluation and material screening. The flow time of several underfills was measured at elevated temperatures using test pieces made from glass microscope slides. The material properties impacting underfill flow, such as viscosity, contact angle, and surface tension, were also experimentally measured and used to calculate estimated flow times using the Washburn equation. Empirical and calculated flow times were compared. The effects of channel width and flow distance on flow time were also studied. Additionally, the effect of a tilted stage on flow time, epoxy tongue, and void formation was evaluated.     

High-breakdown-voltage AlSbAs/InAs n-channel field-effecttransistors

InAs channel field-effect transistors of 1-μm gate length were grown by molecular beam epitaxy and observed to operate at channel electric fields (20 kV/cm) higher than previously demonstrated and several times greater than the threshold for impact ionization in bulk InAs. Voltage gains on the order of 10 were observed with transconductances as high as 414 mS/mm and output conductances as low as 33 mS/mm. These voltage gains are comparable to those of GaAs-based devices and are the highest observed for InAs channel devices. The results demonstrate the potential for practical room-temperature operation of InAs FETs     

Matching score properties between range profiles of high-resolutionradar targets

In this paper, how the statistical properties of the matching scores are affected by the carrier frequency, the aspect variation, the range resolution, and the target complexity are studied. The statistical parameters (mean and standard deviation) of the matching scores among range profiles of independent objects are derived, and their values are used as references to determine the threshold values for target identification. It is found that the range profile obtained at a certain carrier frequency can also be used as the feature vector for radars operated at shifted frequencies if the range resolution is fine enough or the target is simple. It is also found that a radar with higher range resolution can tolerate more aspect variation, yielding a significant advantage in saving memory space for establishing the data base. The results obtained can have several applications such as target identification, data association in multiple target tracking, and target direction determination when widely-spaced high-resolution radars are employed     

一种可用于可调谐环行Ti：Al_2O_3激光器的宽带单向器

本文介绍一种宽带单向器的原理及设计。选用ＴＧＧ作磁旋光介质，旋光石英晶片作补偿片，所设计的色散补偿型宽带单向器预计可在７００～１０００ｎｍ波长范围内实现环行激光腔中的单向行波运行；将其应用在可调谐环行Ｔｉ：Ａｌ２Ｏ３激光器中，获得了良好的实验结果。     

层状介质中重力,地震联合反演的迭代算法

本文提出一种用于层状介质中重力、地震资料联合反演层速度、层密度及弯曲界面深度的迭代算法。该方法通过引入加权最小平方目标泛函,将层状介质中的重力、地震资料联合反演问题转化成具体的优化问题。为了得到反问题的最优解,文中系统地研究了层状介质中双摄动处理技术,以及层状介质中波场摄动的一阶 Born 近似解与理论重力异常摄动解。并应用 Tarantola 的反演理论,导出了梯度算子的计算公式。然后应用最速下降法给出了求取最优解的具体算法,得到了一种类似于地震偏移与空间更投影的迭代反演方法。对理论模型进行重力、地震联合反演的结果表明,该方法不仅可碱少未知参数的个数,提高反演的收敛速度,而且可减少反演的不适定性,不失为一种可行的多参数反演方法。