Rapid growth of angle-confined large-domain graphene bicrystals

In the chemical vapor deposition growth of large-area graphene polycrystalline thin films,the coalescence of randomly oriented graphene domains results in a high density of uncertain grain boundaries (GBs).The structures and properties of various GBs are highly dependent on the misorientation angles between the graphene domains,which can significantly affect the performance of the graphene films and impede their industrial applications.Graphene bicrystals with a specific type of GB can be synthesized via the controllable growth of graphene domains with a predefined lattice orientation.Although the bicrystal has been widely investigated for traditional bulk materials,no successful synthesis strategy has been presented for growing two-dimensional graphene bicrystals.In this study, we demonstrate a simple approach for growing well-aligned large-domain graphene bicrystals with a confined tilt angle of 30° on a facilely recrystallized single-crystal Cu (100) substrate.Control of the density of the GBs with a misorientation angle of 30° was realized via the controllable rapid growth of subcentimeter graphene domains with the assistance of a cooperative catalytic surface-passivation treatment.The large-area production of graphene bicrystals consisting of the sole specific GBs with a tunable density provides a new material platform for fundamental studies and practical applications.     

DH型离心空压机旋转失速故障诊断及治理

旋转失速是压缩机的常见故障 ,但诊断该故障时易和其他故障相混淆。本文从旋转失速的振动机理出发 ,归纳了旋转失速的故障识别特征。旋转失速的特征频率是成对出现的 ,随流量的减少而降低。该故障特征在现场诊断时得到验证 ,并成功应用于现场诊断     

Growth and characterization of Pb0.97La0.02(Zr0.66Sn0.27Ti0.07)O3 antiferroelectric single crystals

Single crystals of Pb_0.97La_0.02(Zr_0.66Sn_0.27Ti_0.07)O₃ (PLZST) with the composition near the morphotropic phase boundary were grown by the flux method. The PbO–PbF₂–B₂O₃ system was used as a solvent. PLZST single crystals with the size of 4–6 mm are obtained and these crystals are slightly translucent after polishing. The splitting of (200) reflection peak indicates that the obtained crystals are of a single phase with tetragonal perovskite structure. The element contents of the grown crystals were measured by inductively coupled plasma atomic emission spectrometry. The chemical composition of the crystals is Pb_0.979La_0.014(Zr_0.666Sn_0.285Ti_0.049)O₃. Thermal properties and dielectric properties of PLZST single crystals were studied. The results show that flux-grown PLZST single crystals exhibit obvious endothermic processes and relaxor behaviors near the phase transition temperatures.     

A novel de-rusting method with molten salt precleaning and laser cleaning for the recycling of steel parts

Clean Technologies and Environmental Policy - Steel parts are a kind of high recovery value product for which de-rusting is the primary step in the recycling process. Laser cleaning is a popular...     

加氢装置加热炉易爆管部位的分析

重点介绍韩国蔚山炼油厂分馏塔底重沸炉火灾事故、中国石油化工股份有限公司洛阳分公司催化裂化柴油加氢装置反应进料加热炉火灾事故、茂名分公司渣油加氢脱硫装置分馏炉火灾事故、镇海炼油化工股份有限公司加氢裂化装置脱丁烷塔底重沸炉火灾事故的情况,找出加氢装置加热炉的易爆管部位,并通过分析总结,提出了易爆管部位的选材原则、设计改进方案及维护措施.     

EDTA interfacial chelation Ca2+incorporates superhydrophobic coating for scaling inhibition of CaCO3 in petroleum industry

In this paper,the superhydrophobic poly(vinylidene fluoride)/fluorinated ethylene propylene/SiO2/CNTs-EDTA(PFSC-EDTA)composite coating was successfully fabricat...     

Torsion sensor based on two cascaded long period fiber gratings fabricated by CO2 laser pulse irradiation and HF etching technique respectively

A novel torsion sensor is proposed, which is composed of one long period fibre grating and one asymmetrically corrugated long period fibre grating based on the high-frequency CO₂ laser pulses technology and burning fibre coating and etching cladding technology, respectively. By combing the advantages of the two aforementioned elements, a sensitivity of 331.7 and 310.3 pm/(rad/m) towards clockwise and anticlockwise direction, respectively, is reached in the experiments.     

CAD在三坐标测量机中的应用

近几年各个三坐标测量软件开发厂商相继在自己的软件中加入了CAD功能,且功能越来越强大。本文就CAD在三坐标测量软件中的使用和其功能作简要阐述。