Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition

In order to overcome the limitations of previous columnar-to-equiaxed (CET) models, which neglect melt convection and the movement of free equiaxed grains, this article presents a three-phase deterministic CET model. With appropriated multiphase volume-averaging approaches, it is possible to account for nucleation and growth of equiaxed grains ahead of a growing columnar front, the influence of melt convection, and grain sedimentation, and the occurrence of a CET in a casting of engineering scale. Special modeling assumptions ensure that both CET mechanisms, namely, “hard” and “soft” blocking, are tackled. It is highly recommended that both mechanisms should be considered, especially in the situation where grain sedimentation and melt convection are present. Although the current model incorporates almost all the physical variables relevant to a CET event, under special condition of a one-dimensional case, the model still reproduces the results of Hunt’s classical CET approach. This article is based on a presentation made in the symposium entitled “Solidification Modeling and Microstructure Formation: In Honor of Prof. John Hunt,” which occurred March 13–15, 2006, during the TMS Spring Meeting in San Antonio, Texas, under the auspices of the TMS Materials Processing and Manufacturing Division, Solidification Committee.     

房地产开发企业会计核算问题探讨

本文就房地产开发企业会计核算的现状及特点进行了分析,并提出了完善房地产开发企业会计核算规范的对策。     

Diagnosis and treatment of iatrogenic ureteral injury

Diagnosis and treatment of 17 patients who sustained 20 iatrogenic ureteral injuries were analyzed. Primary operations in which ureteral injury occurred are almost gynecologic procedures and general surgery. Injuries were managed by ureteroureterostomy in four, ureteral stent in one, removal suture ligation and ureteral double J-catheter in one, ureteroneocystostomy in ten, psoas-hitch technique and ureteroneocystostomy in one, nephrectomy in two. All patients with appropriate repair were followed-up periods of three to five years. Renal function of these patients had optimal results. When ureteral injury occurs, B-US, IVU, cystoscopy, retrograde ureterography or infusion of dye may be useful. An appropriate repair should be chosen according to length and position of ureteral injuries. Reoperation was optimal in two to three weeks. Immediate recognition of accidental ureteral injury provides optimal results. Patients with unrecognized injuries had suboptimal results.     

Invasiveness of LiTaO/sub 3/ and GaAs probes in external E-O sampling

Disturbances of signals on a coplanar waveguide (CPW) induced by the presence of LiTaO/sub 3/ and GaAs electrooptic probes in external electrooptic (EO) sampling have been simulated and compared quantitatively. The finite-difference-time-domain method is used to simulate the full wave field around a coplanar waveguide on a GaAs substrate in an external EO sampling configuration. The results indicate that the induced signal disturbance, or invasiveness, of a LiTaO/sub 3/ probe is almost ten times that of a GaAs probe in terms of the magnitude of S/sub 11/, but that LiTaO/sub 3/ yields about two times the EO response for a given S/sub 11/ and optical probing wavelength. The transparency of LiTaO/sub 3/ to shorter wavelengths, however, allows an even higher sensitivity for this material relative to GaAs. The results suggest that these probes do not exhibit significant invasiveness (magnitude of S/sub 11/ smaller than -40 dB), if they are removed from contact by the distance of CPWs center conductor width.<>     

Analysis of the central cavity of axisymmetric forward extrusion by the upper bound approach

In this paper, the use of a kinematically admissible velocity field to predict the presence of a central cavity in the final stage of axisymmetric forward extrusion is advanced, in accordance with the results of Moire experiments. On the basis of the velocity field, the critical condition for central cavity formation is obtained by the upper bound approach. Furthermore, the quantitative relationships between central cavity formation and process parameters (reduction in area, frictional factors on the ram and chamber wall, relative residual thickness of the of the billet) are studied. The results show that (1) the critical relative residual thickness of the billet used for the central cavity formation is affected primarily by the reduction in area and the frictional factors on the ram, and slightly by the frictional factor on the chamber wall; (2) the relative dimensions of the central cavity increase with a decrease in the relative residual thickness of the billet; (3) the growth rate of the central cavity decreases with an increase in the frictional factors on the ram, but is affected by the frictional factors on the chamber wall only slightly. Good correlation is found between the analytical and experimental results.     

Point-based online value iteration algorithm in large POMDP

Partially observable Markov decision process (POMDP) is an ideal framework for sequential decision-making under uncertainty in stochastic domains. However, it is notoriously computationally intractable to solving POMDP in real-time system. In order to address this problem, this paper proposes a point-based online value iteration (PBOVI) algorithm which involves performing value backup at specific reachable belief points, rather than over the entire belief simplex, to speed up computation processes, exploits branch-and-bound pruning approach to prune the AND/OR tree of belief states online, and proposes a novel idea to reuse the belief states that have been searched to avoid repeated computation. The experiment and simulation results show that the proposed algorithm can simultaneously satisfy the requirement of low errors and high timeliness in real-time system.     

Collaborative representation with reduced residual for face recognition

Collaboration representation-based classification (CRC) was proposed as an alternative approach to the sparse representation method with similar efficiency. The CRC is essentially a competition scheme for the training samples to compete with each other in representing the test sample, and the training class with the minimum representation residual from the test sample wins the competition in the classification. However, the representation error is usually calculated based on the Euclidean distance between a test sample and the weighted sum of all the same-class samples. This paper exploits alternative methods of calculating the representation error in the CRC methods to reduce the representation residual in a more optimal way, so that the sample classes compete with each other in a closer range to represent the test sample. A large number of face recognition experiments on three face image databases show that the CRC methods with optimized presentation residual achieve better performance than the original CRC, and the maximum improvement in classification accuracy is up to 12 %.