3300V 4H-SiC MOSFET 设计与加工

成功设计并制造了击穿电压超过3300V 的4H-SiC MOSFET。通过数字仿真优化了漂移层和DMOSFET有源区参数。漂移层N型外延厚度为33微米并且掺杂浓度为2.5E15cm-3。器件采用浮空场限制环作为终端。当栅极电压为20V,漏极电压为2.5V时,漏极电流为5A。     

雷达威力试飞技术

针对雷达的特点,采用分方向、高度和距离段进行威力统计,克服了传统统计方法的缺陷。文中推导出一定置信度和置信区间时威力试飞的样本量,进一步推导出威力试飞的航次数;然后,开发了威力试飞数据处理软件。该技术客观地鉴定了雷达的性能,对同类雷达试飞具有指导价值。     

基于物联网的联合训练导控系统框架

为了更好地开展联合训练,利用物联网技术搭建联合训练的导控系统。在分析功能需求的基础上,探讨了导控系统的总体结构,并将该系统的各功能模块融入到物联网的感知层、网络层和应用层3层体系结构中,使整个导控系统被物联网覆盖,成为物联网的一个特定实体。通过对系统分层讨论,给出了基于物联网技术进行系统设计的总体思路。研究分析了系统的总体框架和技术架构,可为日后系统开发奠定理论基础。     

短波正交频分复用(OFDM)传输性能研究

短波通信作为一种重要的通信方式一直受到信道带宽的限制,加之传输信道的不稳定性致使其传输效果不佳,如何有效的提高频带利用率、改善传输性能是短波通信的重要研究内容。正交频分复用(OFDM)是一种多载波数字调制技术,在提高频谱利用率、克服多径方面发挥了重要作用。文章以Simulink为平台构建短波OFDM通信系统仿真模型,并在频偏和多径条件下进行仿真,分析仿真结果可以看到,频偏和多径对系统的传输效果都有影响,其中频偏对通信系统的影响较为严重。     

CMOS and SiGe bipolar circuits for applications up to 110 GHz

Recently, CMOS has been demonstrated to be a viable technology for very-high-bit-rate broad-band and wireless communication systems up to 40 Gb/s and 50 GHz. Advances in device scaling and doping-profile optimization have also resulted in SiGe bipolar transistors with impressive performance, including cut-off frequencies of more than 200 GHz. This paper presents advances in circuit design which fully exploit the high-speed potential of a 0.13 µm CMOS technology up to 50 GHz and of a high-performance SiGe bipolar technology up to 110 GHz operating frequency. The combination of advanced circuit techniques and a state-of-the-art fabrication-process technology results in continuing the upward shift of the frequency limits.     

Engineered Elastomer Substrates for Guided Assembly of Complex 3D Mesostructures by Spatially Nonuniform Compressive Buckling

Approaches capable of creating 3D mesostructures in advanced materials (device‐grade semiconductors, electroactive polymers, etc.) are of increasing interest in modern materials research. A versatile set of approaches exploits transformation of planar precursors into 3D architectures through the action of compressive forces associated with release of prestrain in a supporting elastomer substrate. Although a diverse set of 3D structures can be realized in nearly any class of material in this way, all previously reported demonstrations lack the ability to vary the degree of compression imparted to different regions of the 2D precursor, thus constraining the diversity of 3D geometries. This paper presents a set of ideas in materials and mechanics in which elastomeric substrates with engineered distributions of thickness yield desired strain distributions for targeted control over resultant 3D mesostructures geometries. This approach is compatible with a broad range of advanced functional materials from device‐grade semiconductors to commercially available thin films, over length scales from tens of micrometers to several millimeters. A wide range of 3D structures can be produced in this way, some of which have direct relevance to applications in tunable optics and stretchable electronics.     

Radiation of millimeter waves from NRD leaky wave antennas withtapered transition and tuning aperture

The radiation of millimeter waves from the nonradiative dielectric (NRD) leaky wave antennas with the tapered transition and the tuning aperture is investigated. An accurate theory for the leakage constant and the phase constant of the antennas is presented, which is based on the generalized scattering parameters considering the higher-order mode interactions at the discontinuities. The associated transverse equivalent network involves the characterization of the mode couplings at two air-to-dielectric interfaces, the coupled mode analysis of the tapered transition, and the calculation of the radiation fields at the tuning aperture via the extended spectral domain approach. The interesting behavior of the present modified configuration of NRD leaky wave antennas is illustrated by typical examples. The validity of the theory is confirmed by the comparison of the theoretical results with experimental data for the limiting cases     

基于OSPF的ASON路由协议研究

全球数据业务的爆炸式增长要求光传送网络提供更灵活的网络指配和高效快速的网络保护恢复能力，ASON 技术的出现和快速发展体现了光网络发展的这一新趋势。本文先介绍了 ASON 的路由结构，然后对基于 GMPLS 的 OSPF-TE 在 ASON 中的应用进行了分析。     

基于工控机的雷达数据终端的设计与实现

早期的测量雷达融入现代测控试验信息数据网，需要对雷达状态和数据进行数字化采集、处理和传输。文中针对某型雷达的现状，采用研华PCA-6006工业单板计算机，自研角编码板和数据状态采集板，并开发实时和事后数据处理软件，完成该雷达终端的功能。经过实际应用证明，系统工作稳定可靠，满足雷达整机功能的需求。     

基于RPR的高生存性网络

弹性分组环(RPR)技术定义了一种新型的媒体接入控制(MAC)层协议,采用了共享介质传输和空间复用协议以及低于50 ms的故障恢复保护的弹性机制,支持服务等级协定(SLA,Service Level Agreement),即插即用,基于MAC的高速交换,可承载具有突发性的IP业务,同时支持传统的语音传送,是未来城域网技术的重要发展方向.光纤技术的飞速发展使得RPR不再仅仅局限于城域网,还可以用于广域网.文章在基于RPR的低于50 ms的故障恢复保护的基础上,提出了具有高生存性的解决方案.