高分2号图像业务化大气校正查找表的设计与实现

为实现高分2号图像(GF2)业务化大气校正,利用矢量6S模型(6SV)将辐射传输散射与吸收进行分离计算,其中散射部分采用涵盖各种大气模式、气溶胶类型、成像几何等条件下的大气校正查找表(look-up tables,LUTs)表示,大气吸收部分采用6SV拟合计算的6种大气模式下大气透过率的经验公式表示,这种处理有效简化了查找表大小.在内存4 GB、主频3.10 GHz条件下,通过比较基于本查找表方法和基于FLAASH大气校正软件对北京地区一景GF2数据处理.结果表明:以6SV模型直接大气校正法结果作为真值,两者的绝对误差分别为0.8%和2.6%,处理时间分别为77 s和240 s,该大气校正查找表在处理精度和效率更加适合业务化大气校正.     

承德地方企业与高校合作公共政策

我国70%左右的科技人员集中在高校、科研院所。高等学校具有全国最强的创新资源和优势。承德市经济基础薄弱、技术水平较低,但是具有丰富的自然资源,特别是山林、水和旅游资源丰富,随着高速公路网和高铁的建设,已经成为京津冀和东北、内蒙的交通枢纽。如果能够科学合理地选择合作方式,建立基于市场的长期有效的激励机制就能够把这两种优势有效地结合起来,产生巨大的发展动力,有力地促进创新型城市的发展。     

Non-Fourier heat conduction in a thin gold film heated by an ultra-fast-laser

Based on the dual-phase-lagging(DPL)heat conduction model,the Cattaneo-Vernotte(CV)model and the improved CV model we investigate the one-dimensional heat conduction in gold films with nano-scale thickness exposed to an ultra-fast laser heating.The influence of system parameters on the temperature field is explored.We find that for all the non-Fourier heat conduction models considered in this work,a larger Knudsen number normally leads to a higher temperature.For the DPL model,the large ratio of the phase lag of temperature gradient to the phase lag of heat flux reduces the maximum temperature and shortens the time for the system to reach its steady state.The CV model and the improved CV model lead to the similar thermal wave behavior of the temperature field,but the thermal wave speeds for these two models are different,especially for large Knudsen numbers.When the phase lag of temperature gradient is smaller,the difference between the DPL model and the improved CV model is not significant,but for the large phase lag of temperature gradient the difference becomes quite significant,especially for the large Knudsen number.In addition,the effect of the surface accommodation coefficient,which is a parameter in the slip boundary condition,on the temperature field of the gold film heated by ultra-fast laser pulses is investigated based on the DPL model.     

以品牌专业建设为契机 抓住发展机遇 全面提高专业建设质量

专业建设是高等学校最重要的教学基本建设,是教育教学工作的基础和重要生命线,是高等学校人才培养的重要依托。加强本科品牌专业的建设可提升学校本科专业建设的整体水平,提高学校本科人才培养质量、效益和竞争力。文章围绕如何开展品牌专业建设,结合学校实际,着重从品牌专业内涵、建设原则、内容和评价办法等方面进行了阐述。     

第二代农民工市民化与中国共产党执政能力建设

第二代农民工市民化利益要求的实现有助于从阶级基础、群众基础、执政理念、执政资源和执政环境等方面加强党的执政能力建设。在第二代农民工市民化背景下,党应该强化执政为民的理念,构建利益相关制度,强化第二代农民工的工人阶级意识和主人翁意识,鼓励他们积极参与政治生活,有组织、有秩序地进行利益表达,使他们充分享受到城市经济社会发展成果,同时提高党自身的执政能力。     

液压系统进、旁油路联合调速回路分析

在定量液压泵供油的系统中给出进、旁油路联合调速的回路,通过对2种进、旁油路联合调速的定量分析,推导出理论计算依据,得出这2种进、旁油路联合调速的调速特点。     

横风作用下复杂路段汽车运行安全的概率评估

应用基于可靠度的概率模型对多风的环境中汽车运行稳定性进行了评估。定义了具有概率特性的基本变量风速、风向、路面摩擦系数、路拱横坡度和汽车速度,分析了各种基本变量的相互关系,以及它们如何影响交通事故的概率,并建立了基于交通事故指数的数学概率模型。结果表明,与风有关的交通事故是几个基本变量综合作用的结果。该研究可以为多风地区的道路设计及交通安全的保障提供一定的理论依据。     

导磁体在汽车零件感应加热中的应用技术

本文简单介绍了导磁体工作的基本原理，并给出在汽车零件大规模生产中所积累的导磁体应用的一些经验，以阐明如何更有效地使用导磁体。     

Oxidation behavior and mechanism of aluminum oxynitride (AlON) at elevated temperatures

The oxidation behavior and mechanism of aluminum oxynitride (AlON) powder exposed to air at elevated temperatures between 800°C and 1300°C was investigated by X-ray diffractometry (XRD), scanning electron microscope (SEM), electron spin resonance (ESR), nuclear magnetic resonance (NMR), and simultaneous thermogravimetry, differential thermal analysis, and mass spectrometry techniques (TG-DTA-MS). The weight of AlON gradually increases to a maximum value at 1150°C and then decreases with further heating. Meanwhile, AlON powder undergoes chemical changes, as evidenced by lattice expansion, and turns eventually into alumina. ESR spectra reveal the occurrence of lone pair electrons in the oxidized products and the intensity of corresponding resonance signal increases before disappearing with the increase in temperature. Combined with the results of NMR and TG-DTA-MS, the measured data suggest that Al-N in [AlO₃N] tetrahedron and [AlO₅N] octahedron are gradually oxidized into Al-O-N group with lone pair electrons, which causes continuous weight gain and lattice expansion. Further oxidation at higher temperatures results in alumina and N₂.     

Oxidation Performance of Fe-Al/WC Composite Coatings Produced by High Velocity Arc Sprayed at 650 ℃

Fe-Al intermetallics with remarkable high-temperatureintensity and excellent erosion,high-temperatureoxidation and sulfuration resistance are potential lowcost high-temperature structural material.ProducingFe-Al/WC composite coating by high velocity arcspraying(HVAS)on structural materials would notonly obviate the problems faced in fabrication of thesealloys into useful shapes,but also allow the effectiveuse of their outstanding high-temperature performance,which might thus promisingly mak…