发动机连杆螺纹孔加工质量的改进

对发动机连杆螺纹孔在攻丝过程中出现烂牙、粗糙度差等加工质量问题进行了分析，提出了解决问题的方法，使连杆的合格率行到显著的提高。     

偏振模色散统计特性的研究

利用动态方程研究了偏振模色散矢量的统计特性 ,分别用统计系综和频率系综两种方法进行数值模拟。数值结果表明 ,统计系综和频率系综两种方法的结果一致。在大归一化距离条件下 ,均方根时延的平方随归一化距离线性变化 ;偏振模色散矢量的各个分量服从高斯分布 ,差分群时延服从麦克斯韦分布 ;偏振模色散矢量弥散于整个邦加球     

近非临界相位匹配温度调谐MgO：LiNbO3OPO

通过对MgO:LiNbO3参量过程温度相位匹配及走离角，允许参量等运转参数的理论计算与分析，确定了晶体的切割角度θ=82℃，以近非临界相位匹配（NCPM）取代NCPM，将温度调节范围控制在较低的温度上，研制了532nm泵浦的MgO:LiNbO3温度调谐脉冲光学参数振荡器（OPO），在800～1700nm波段实现连续调谐输出。参量泵浦功率密度阈值为57.3MW/cm^2，泵浦能量约2倍阈值处，单谐振（SRO）参量转换效率为11%以上。     

Manufacture of carbon fibers from polyacrylonitrile precursors treated with CoSO4

Free‐radical solution copolymerization of itaconic acid and acrylonitrile was carried out in DMSO using azodiisobutyronitrile as an initiator, changing the feed rate of itaconic acid. The resulting polymerization solution was spun to form polyacrylonitrile (PAN) precursors of carbon fibers. The precursors were treated with a CoSO₄ aqueous solution on‐line. The structure and properties of untreated and treated PAN precursors and the resultant carbon fibers were characterized by SEM and TEM, a stabilization process, etc. It is suggested that CoSO₄ acts as a catalyst in the formation of a ladder structure and reduces the temperature of cyclization, and the carbon fibers developed from treated PAN fibers showed improvement in the tensile strength and the Young's modulus. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 153–158, 2002     

Multiresolution analysis in extraction of reference lines fromdocuments with gray level background

Based on wavelets, a theoretical method has been developed to process multi-gray level documents. In this method, two-dimensional multiresolution analysis, a wavelet decomposition algorithm, and compactly supported orthonormal wavelets are used to transform a document image into sub-images. According to these sub-images, the reference lines of a multi-gray level document can be extracted, and knowledge about the geometric structure of the document can be acquired. Particularly, this approach is more efficient to process form documents with gray level background. Experiments indicate that this new method can be applied to process documents with promising results     

薄相屏闪烁的数值分析

本文在弱闪烁条件下，利用广泛适用于星际闪烁、行星际闪烁和电离层闪烁的薄相屏理论，以行星际闪烁为算例，对薄相屏闪烁进行了数值分析。结果表明：垂直于介质运动方向上的不规则结构的大小对闪烁有着重要的影响，直接表现在频谱的变化趋势和振荡幅度的不同。尤其是当小于Ｆｒｅｓｎｅｌ尺度时，数值计算表明此时没有闪烁发生。     

用于重离子核反应实验测量的纵向电场气体电离室

本文报道了一种新型的大动态范围，多叠层探测器系统组件之一的纵向电场气体电离室的构造，性能和在中能得离子核反应实验中的应用。     

一种有效的振动信号分离算法

振动信号包含随机成分与周期成分 ,其中的随机成分占据了很宽的频域 ,其能量极易引起其它设备特别是电子设备的共振 ,从而导致设备失效。为评估随机成分对设备的影响 ,需要将周期成分从振动信号中去除。为此 ,首先使用ARMA建模法对振动信号中周期成分出现的频率位置进行估计 ,然后设计阻带带宽极窄 (小于 0 .5Hz)的V型滤波器来完成相应的滤波。实验表明本文中的方法能有效地去除振动信号中的周期成分 ,而完整地保留随机成分