热物理性质测试技术研究现状和发展趋势

本文在对热物理性质研究在热能工程、材料科学、信息科学、航天工程、环境工程、生物科学、微电子技术和计量学等众多科技领域中的重要性进行探讨的基础上，评述了热物理性质测试技术的研究现状和发展趋势。鉴于薄膜材料在微电子器件、集成电路和微电子机械系统等领域中日益广泛的应用，本文还综述了亚微米－纳米尺度薄膜材料热导率和热扩散率的测试新技术。     

HTR-10燃料元件装卸系统冷态调试

10MW高温气冷实验堆（HTR－10）是一座球床堆，由燃料元件装卸系统实现燃料元件的装卸和循环，且不需要停堆，为保证HTR－10的正常运行，燃料元件装卸系统必须安全，可靠，为此，必须对燃料元件装卸系统进行周密，细致的调试试验和验证，本文介绍了燃料元件装卸系统冷调试的主要调试项目，调试方法和调试结果。     

Residual Stress Simulation of Injection Molding

In this study, distribution and history of residual stresses in plaque-like geometries are simulated based on linear thermoviscoelastic model, which helps to understand the mechanics and evolution of the residual stresses in the injection molding process. The numerical calculation of direction, combined with the specified boundary conditions. Results show that the stress variation across the thickness exhibits a high surface tensile value changing to a compressive peak value close to the surface, with the core region experiencing a parabolic tensile peak. Residual stress distribution throughout the thickness is almost same along the flowpath and the final residual stresses value near the gate is lower than the value near the end of flowpath.     

Deposition and Properties of Superconducting MgB2 Thin Films

The recently discovered superconductor MgB₂ with T _c at 39 K has great potential in superconducting electronics. In this paper, we review the deposition techniques used for MgB₂ thin films in the light of a thermodynamic study of the Mg-B system with the calculation of phase diagrams (CALPHAD) modeling technique. This thermodynamic study identifies a growth window in the pressure–temperature phase diagram, in which the magnesium pressure is very high for likely in situ growth temperatures. A Hybrid Physical–Chemical Vapor Deposition (HPCVD) technique that successfully achieves such a high Mg pressure is shown to produce in situ epitaxial MgB₂ thin films with bulk superconducting properties.     

Closed-loop optimal control-enabled piezoelectric microforce sensors

This paper presents a closed-loop optimally controlled force-sensing technology with applications in both micromanipulation and microassembly. The microforce-sensing technology in this paper is based on a cantilevered composite beam structure with embedded piezoelectric polyvinylidene fluoride (PVDF) actuating and sensing layers. In this type of sensor, the application of an external load causes deformation within the PVDF sensing layer. This generates a signal that is fed through a linear quadratic regulator (LQR) optimal servoed controller to the PVDF actuating layer. This in turn generates a balancing force to counteract the externally applied load. As a result, a closed feedback loop is formed, which causes the tip of this highly sensitive sensor to remain in its equilibrium position, even in the presence of dynamically applied external loads. The sensor's stiffness is virtually improved as a result of the equilibrium position whenever the control loop is active, thereby enabling accurate motion control of the sensor tip for fine micromanipulation and microassembly. Furthermore, the applied force can be determined in real time through measurement of the balance force.     

Calculation of Ultraslow Dielectric Relaxation of Doped BaTiO3 Ceramics

Using a linear voltage ramp method, ultraslow dielectric relaxation processes of La-doped BaTiO₃ boundary layer (BL) capacitors are measured at room temperature. For the electric polarization model of a double-layer dielectric, a procedure to calculate the electrical parameters of grain and grain boundary has been developed. Calculated results suggest that there is a shell on the surface of the grain. TEM images of the BL capacitor also show a lot of microregions with minor structural modifications. Relaxation times are estimated from the equivalent circuit and are in agreement with fitted results.     

纳米β-Ni(OH)2与球型Ni(OH)2的热性能比较研究

用配位沉淀法合成出纳米级Ni（OH）2，并对其进行XRD，TEM，DSC分析，分析结果表明，所得纳米β-Ni（OH）2为可用作电极材料的β-Ni（OH）2，粒径为30－40nm，且热分解温度比普通球镍低10℃左右，摩尔分解热比普通球镍低4－7kJ，从理论上分析了产生此现象的原因。     

分割电极片状压电致动器——(二)位移特性及狭缝宽度对其影响的实验研究

研究了悬臂梁式分割电极片状压电致动器的位移特性。理论分析表明，分割电极狭缝宽度会减小致动器自由端的位移输出，但当狭缝宽度小于致动器电极宽度的１０％时，可忽略狭缝宽度的影响。致动器端部位移的测试结果大于理论计算值。与现有磁头悬浮臂尺寸相近的致动器，在２０Ｖ～５０Ｖ的电压驱动下均可获得１μｍ～２μｍ的致动位移。对９８５０道／厘米的密度磁盘，该位移能覆盖至少一个磁道宽度，满足磁头定位两级伺服系统对第二级致动器位移的基本要求。     

浅谈ispLSI及其应用

本文以ｉｓｐＬＩＳＩ１０００系列为例，对ｉｓｐ技术及ｉｓｐＬＳＩ器件进行了较为详细的介绍，并结合具体设计实例，介绍ｉｓｐＬＳ开发工具的使用。     

Synthesis, characteristics and oxygen-sensitive properties of SrMgxTi 1 − xO3 nanocrystals

SrMg_xTi_{1 - x}O₃ nanocrystals (x = 0.1–0.6) were synthesized by the stearic acid gel method. Powder samples were characterized by X-ray diffraction and X-ray photoelectron (XP) spectroscopy. The results showed that the lattice parameter a and the O 1s XP spectrum changed not only with the Mg content x but also with the grain size d of the samples. The conductivity of a thick film specimen fabricated on an aluminium oxide wafer was investigated in a nitrogen—oxygen atmosphere.