德惠断陷下白垩统碎屑岩储层特征及控制因素分析

德惠断陷下白垩统登娄库组、营城组、沙河子组储层物性差,勘探风险大.利用岩心观察、铸体薄片鉴定、扫描电镜分析、黏土X线衍射分析等方法,分析储层基本特征、储层成岩作用和控制因素.结果表明:德惠断陷下白垩统碎屑岩储层成分成熟度和结构成熟度较低,储层孔隙类型主要有残余原生孔、次生孔和混合孔,储层物性和孔隙结构较差;压实作用是导致储层物性变差的主要原因,溶蚀作用改善储层物性;纵向上发育2个次生孔隙带,主要形成于中成岩期,次生孔隙带的形成与有机质生烃排酸和断裂有关.研究结果为德惠断陷下白垩统进一步油田勘探提供地质依据,对其他地区类似储层研究有一定借鉴意义.     

析架空输电线路上倍容导线的选择

架空输电线路项目扩容改造,当采用倍容导线时,需在技术和经济上对倍容导线进行比较分析。文章对这种导线的种类、特性情况作了介绍,通过在220kV线路上对倍容导线的选择分析,为同类案例的处理提供了借鉴和参考。     

INFORMATION DESIGN OF UNIVERSAL ADJUSTMENT PROGRAM OF PLANE CONTROL NETWORKS

ＩＮＦＯＲＭＡＴＩＯＮＤＥＳＩＧＮＯＦＵＮＩＶＥＲＳＡＬＡＤＪＵＳＴＭＥＮＴＰＲＯＧＲＡＭＯＦＰＬＡＮＥＣＯＮＴＲＯＬＮＥＴＷＯＲＫＳＩＮＦＯＲＭＡＴＩＯＮＤＥＳＩＧＮＯＦＵＮＩＶＥＲＳＡＬＡＤＪＵＳＴＭＥＮＴＰＲＯＧＲＡＭＯＦＰＬＡＮＥＣＯＮＴＲＯ...     

Ni-Cr-Fe-Si-B合金涂层及铝青铜基体熔合区组织的研究

采用钨极氩弧焊方法在铝青铜基体上施焊了Ni—Cr-Fe-Si—B合金涂层，并运用金相显微镜、扫描电子显微镜及能谱分析了喷涂层、熔合区及热影响区的组织形貌和成分分布。结果表明，喷焊时，在涂层与基体界面两侧各组元均发生了明显的扩散，Cu、Ni组元间可相互取代，基体融合区组织的基本组成仍为α (α γ2)，但同时也形成了Cu2FeAl7、NiAl3等新相，且融合区组织细小，涂层与基体间为冶金态结合。     

Thermodynamic reassessment of the Cd−Zn system

The Cd−Zn system has been thermodynamically reassessed with the CALPHAD method by combining more recent experimental data, in particular the activities of zinc in the liquid phase. A good agreement is obtained between the calculated and experimental thermodynamic parameters as well asphase boundaries.     

中英规范有关建筑物防雷接地做法的比较

结合国家标准GB 50057-2010《建筑物防雷设计规范》和BS规范BS EN 62305-2006《Protection against lightning》,介绍了两本规范中建筑物防雷装置做法,简述了两种规范中有关建筑物外部防雷(接闪器、引下线、接地装置)、内部防雷以及防雷击电磁脉冲的有关规范条文规定和比较。     

Dual–primal proximal point algorithms for extended convex programming

This paper presents a class of dual–primal proximal point algorithms (PPAs) for extended convex programming with linear constraints. By choosing appropriate proximal regularization matrices, the application of the general PPA to the equivalent variational inequality of the extended convex programming with linear constraints can result in easy proximal subproblems. In theory, the sequence generated by the general PPA may fail to converge since the proximal regularization matrix is asymmetric sometimes. So we construct descent directions derived from the solution obtained by the general PPA. Different step lengths and descent directions are chosen with the negligible additional computational load. The global convergence of the new algorithms is proved easily based on the fact that the sequences generated are Fejér monotone. Furthermore, we provide a simple proof for the O(1/t) convergence rate of these algorithms.     

Multifocus image fusion method of Ripplet transform based on cycle spinning

The curvelet transform can represent images at both different scales and different directions. Ripplet transform, as a higher dimensional generalization of the curvelet transform, provides a new tight frame with sparse representation for images with discontinuities along C² curves. However, the ripplet transform is lack of translation invariance, which causes the pseudo-Gibbs phenomenon on the edges of image. In this paper, the cycle spinning method is adopted to suppress the pseudo-Gibbs phenomena in the multifocus image fusion. On the other hand, a modified sum-modified-laplacian rule based on the threshold is proposed to make the decision map to select the ripplet coefficient. Several experiments are executed to compare the presented approach with other methods based on the curvelet, sharp frequency localized contourlet transform and shearlet transform. The experiments demonstrate that the presented fusion algorithm outperforms these image fusion works.     

一种内嵌导磁槽的圆感应同步器

圆感应同步器是一种高精度角度传感器,传统的圆感应同步器的转子需外引激励线以驱动其工作,鉴于圆感应同步器在使用过程中需要连续旋转,这将使得外引激励线存在绞线的问题,本文提出一种新的设计方法,在圆感应同步器的定、转子基体上嵌有环状的金属导磁槽,导磁槽内放入环状金属导线.通过给定子导磁槽内的环状金属导线施加激励信号,此激励信号可耦合到转子导磁槽内的环状金属导线中以驱动转子工作,这使得转子无需外引激励线,进而提高了系统应用的便利性以及可靠性.