Performance of Sewage Sludge Treatment and Electricity Generation by Different Configuration Microbial Fuel Cells

This paper compared the degradation efficiency of sludge organic matters and electric-production by two typical microbial fuel cells——dual-chamber microbial fuel cell(DMFC)and single chamber air cathode microbial fuel cell(SAMFC),and the variations of sludge protein,polysaccharide and ammonia nitrogen within the systems were also investigated.The results showed that the concentration of sludge soluble chemical oxygen demand,protein and carbohydrate of DMFC are higher than these of SAMFC during the systems operation,while DMFC can achieve a better ammonia nitrogen removal than SAMFC.Under the same operation condition,the stable voltage output of DMFC and SAMFC is 0.61 V and 0.37 V;the maximum power density of DMFC and SAMFC is 2.79 W/m3and 1.25 W/m3;TCOD removal efficiency of DMFC and SAMFC is 34.14%and 28.63%for 12 d,respectively.Meanwhile,DMFC has a higher coulomb efficiency than SAMFC,but both are less than5%.The results showed that DMFC present a better performance on sludge degradation and electric-production.     

Experimental Research on the Dynamic Energy Absorbing Capacity of the Honeycomb Paperboard Filled with Polyurethane

A kind of composite buffering material was made by filling the voids of honeycomb paperboard with polyurethane. Drop tests were performed to evaluate the dynamic energy absorption capacity of the material. Based on the tests results, the mechanical behaviors of the material under low velocity dynamic impact conditions were analyzed. It was shown that the absorbed energy of the composite material varies inversely with the void diameter. The absorbed energy of the composite material is 1 - 2 times than that of honeycomb paperboard and polyurethane. The energy absorption efficiency of the composite material is better than those of honeycomb paperboard and polyurethane.     

数字化电气信息采集对继电保护可靠性的影响

数字化电气信息采集为数字化变电站乃至智能电网信息化提供直接支撑.针对电子式互感器和合并单元的特点,给出数字化电气信息采集系统的功能模块.从互感器结构、数字传输、数据验证、采样频率和系统配置方面,分析数字化电气信息采集对继电保护可靠性的影响,着重说明了数据同步对差动保护的影响.指出由于存在电子式互感器的稳定性以及网络通讯可依赖性问题,目前数字化变电站继电保护系统在很大程度上仍沿用传统保护的设计思路,有待进行深入研究和突破.     

三弧段型面联接的数控加工

论述了三弧段型面曲线的形成及其曲线参数方程,编制了三弧段型面的数控加工宏程序,适用于各种不同参数的三弧段型面的加工,且能够满足加工精度的要求。     

Micro- and nano-scale deformation behavior of nylon 66-based binary and ternary nanocomposites

The primary aim of this paper is to provide an insight on the effect of the location of organoclay on the micro- and nano-scale deformation processes in melt-compounded nylon 66/organoclay/SEBS-g-MA ternary nanocomposites prepared by different blending sequences. In addition, the deformation processes of the ternary nanocomposites were compared to the binary nanocomposites (nylon 66/organoclay and nylon 66/SEBS-g-MA) and neat nylon 66. The incorporation of SEBS-g-MA particles toughened nylon 66 markedly; but the flexural modulus and strength were both reduced. Conversely, the use of organoclay increased the modulus but decreased the fracture toughness of nylon 66. Nylon 66/SEBS-g-MA/organoclay ternary nanocomposites exhibited balanced elastic stiffness and toughness. Stress-whitening studies of the fracture surfaces in terms of gray level were also performed and an attempt was made to correlate the optical reflectivity characteristics with fracture toughness. It was concluded that the capability of SEBS-g-MA particles to cavitate was decreased by the presence of organoclay in the SEBS-g-MA phase, resulting in reduced toughening efficiency. The best micro-structure for toughness and other mechanical properties is thus to maximize the amount of exfoliated organoclay in the nylon 66 matrix rather than to have it embedded in the finely dispersed SEBS-g-MA particles.     

零电压零电流开关全桥PWM变换器的研究

文本通过分析全桥ZVZCS PWM变换器的工作原理,得出其与传统的全桥ZVZCS PWM变换器的不同之处,然后具体分析对于变化的负载电流,电路环流是如何自我调节以实现ZCS的,并给出了一些影响实现ZVZCS的关键元器件的参数设计公式。最后样机的试验波形证了本文的分析研究。     

4Cr5MoSiV1热作模具钢锻造加热工艺的改进

攀长钢生产的4Cr5MoSiV1热作模具钢锻材存在超声波探伤合格率较低的问题。分析认为主要原因是沿用较低的锻前加热温度，钢锭加热程度不足造成锻造时大锻材中心没有充分锻透。笔者对4Cr5MoSiV1钢锻造加热工艺进行了递进式改进，逐步调整钢锭加热制度从1180℃最终提高到1270℃．1290℃，同时相应调整退火工艺制度，基本解决了上述问题，探伤废品大幅降低，锻造火次也明显减少，并避免高温加热引起的粗晶降低钢材使用性能，取得了显著的工艺改进效果。另外，采用高温加热也使钢中的显微偏析明显减轻，获得了部分的均匀化扩散退火的效果：一次碳化物减少，尺寸变小，没有尖锐的棱角，冲击韧性比工艺改进前有明显提高。     

特高压通道降压运行时安徽500kV西通道建设必要性分析

根据华东1000kV特高压输电通道初期降压运行的统筹安排，结合淮南煤电基地电源、平圩电厂二期及蚌埠电厂等电源的装机进度，通过对各电源接入系统方案的计算分析，最后得出结论：为保证江北地区电力送出，安徽500kV西路过江通道在“十一五”期间建成是有必要的。