中部高新技术产业的风险投资融资模式研究

中部六省要实现快速崛起,必须加快高新技术产业化的步伐,带动经济的快速发展,缩短与发达地区的差距。高新技术产业发展的本质特征使传统融资模式不能适应其融资要求,风险投资这种新的融资模式应运而生。从风险投资对传统融资模式的创新入手,阐述了风险投资机制与传统融资模式的区别,并提出在中部发展风险投资这种新型融资模式存在的问题和对策。     

基于边缘搜索的蚁群算法

蚁群算法是根据真实蚁群的觅食原理提出的一种新兴的启发式搜索算法。算法应用于解决组合优化问题，取得了良好的效果。定义了一种新的旅行商问题，即过程旅行商问题，针对这个问题提出了一种基于边缘搜索的改进蚁群算法。该算法通过限制蚂蚁的起点城市，提高了蚁群算法的搜索效率；并通过减少蚂蚁数量加快计算速度。应用于过程旅行商问题的仿真计算表明，该算法具有相同的计算结果和更快的求解速率。     

SEM in-situ investigation on fatigue cracking behavior of P/M Rene95 alloy with surface inclusions

The low-cycle fatigue behavior of powder metallurgy Rene95 alloy containing surface inclusions was investigated by in-situ observation with scanning electron microscopy （SEM）. The process of fatigue crack initiation and early stage of propagation behavior indicates that fatigue crack mainly occurs at the interface between the inclusion and the matrix. The effect of inclusion on the fatigue crack initiation and the early stage of crack growth was very obvious. The fatigue crack growth path in the matrix is similar to the shape of inclusion made on the basis of fatigue fracture image analysis. The empiric relation between the surface and inside crack growth length, near a surface inclusion, can be expressed. Therefore, the fatigue crack growth rate or life of P/M Rene95 alloy including the inclusions can be evaluated on the basis of the measurable surface crack length parameter. In addition, the effect of two inclusions on the fatigue crack initiation behavior was investigated by the in-situ observation with SEM.     

应用等效电路模型的频率选择表面有效分析

给出了一种基于等效电路模型的频率选择表面(FSS)快速分析方法。对任意形状单元的FSS结构,采用并联组合形式的LC等效电路,并通过全波模式展开分析,采用线性最小平方拟合和线性代数方法求得到其等效电路参数。对三极形单元夹嵌FSS结构实例的分析表明,文中方法与全波分析结果的一致性非常好,并便于FSS结构的最优化设计,可扩展到多层FSS结构的分析。     

Tensile behavior and deformation mechanisms of bulk ultrafine-grained copper

The tensile behaviors of the ultrafine-grained (UFG) pure copper prepared by cold rolling have been investigated. The UFG-Cu exhibited high strengths and low ductility. The ductile dimple-like fracture surfaces and persistent-slip-bands (PSBs)-like local shear bands in the tension-deformed UFG-Cu were observed, both of which typically spanned tens of grain sizes. This observation indicated that the fracture mechanisms operated at a larger scale than the grain size and eventually involved collective grain activities. Moreover, localized shear bands provided the experimental evidence to the localized plastic deformation, which was the one of the dominant reasons, causing the low ductility in the UFG-Cu.     

Micro- and nano-scale deformation behavior of nylon 66-based binary and ternary nanocomposites

The primary aim of this paper is to provide an insight on the effect of the location of organoclay on the micro- and nano-scale deformation processes in melt-compounded nylon 66/organoclay/SEBS-g-MA ternary nanocomposites prepared by different blending sequences. In addition, the deformation processes of the ternary nanocomposites were compared to the binary nanocomposites (nylon 66/organoclay and nylon 66/SEBS-g-MA) and neat nylon 66. The incorporation of SEBS-g-MA particles toughened nylon 66 markedly; but the flexural modulus and strength were both reduced. Conversely, the use of organoclay increased the modulus but decreased the fracture toughness of nylon 66. Nylon 66/SEBS-g-MA/organoclay ternary nanocomposites exhibited balanced elastic stiffness and toughness. Stress-whitening studies of the fracture surfaces in terms of gray level were also performed and an attempt was made to correlate the optical reflectivity characteristics with fracture toughness. It was concluded that the capability of SEBS-g-MA particles to cavitate was decreased by the presence of organoclay in the SEBS-g-MA phase, resulting in reduced toughening efficiency. The best micro-structure for toughness and other mechanical properties is thus to maximize the amount of exfoliated organoclay in the nylon 66 matrix rather than to have it embedded in the finely dispersed SEBS-g-MA particles.     

Research and Improvement on structure stability and corrosion resistance of nickel-base superalloy INCONEL alloy 740

INCONEL alloy 740 is a newly developed Ni–Cr–Co–Mo–Nb–Ti–Al superalloy in the application to ultra-supercritical boilers with steam temperatures up to 700 °C. By means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), micro-chemical phase analyses, and corrosion-resisting test, this paper investigates the structure stability of the alloy at elevated temperature and concentrates on coal ash corrosion performance of the alloy under the simulated coal ash/flue gas condition. Experimental results show that the most important structure instabilities of the alloy during prolonged aging are γ′ coarsening, γ′ to η transformation and G phase formation at grain boundary. The performance of corrosion resistance of the alloy would meet the requirement of ultra-supercritical boiler tubes. The phase computation by means of Thermo-Calc has been adopted in chemical composition modification for structure stability improvement. Two suggested new modified alloys in adjustment of the Al and Ti contents and in control of Si level, and also in maintenance of Cr content of the alloy were designed and melted for experimental investigation. These two modified alloys exhibit more stable microstructure during 760 °C long time aging.     

Diffraction field of tightly focused laser beams and its influence to laser accelerator

In this paper, we have studied the dynamic characteristics of relativistic electron injected into stationary intense vacuum laser fields. We found the dynamic trajectories can basically be classified as three categories, namely Inelastic Scattering (IS), Capture and Acceleration Scenario (CAS) and Penetrate into Axial Region and Move (PARM) trajectory. The physical mechanism as to the three kinds of electrons have been examined. In particular, the PARM trajectory which we presented in this paper is different from the CAS and IS trajectory which we had already found in our previous work. We will show the PARM stems from the strong diffraction effect of a tightly focused laser field. In addition, the initial condition for the three kinds of electrons to emerge were detailed investigated. It has been found that there are four factors which chiefly decide the appearance of the three kinds of dynamics trajectories, namely the laser beam width w₀ and intensity a₀, the electrons incident angle θ and initial transversal momentum p_ti. The implication of the PARM electrons to the planned vacuum laser accelerators is illustrated.     

Formation of amorphous and nanocrystalline phases in high velocity oxy-fuel thermally sprayed a Fe–Cr–Si–B–Mn alloy

High velocity oxy-fuel (HVOF) thermal spray was used to deposit a Fe–Cr–Si–B alloy coating onto stainless steel (1Cr18Ni9Ti) substrate. Microstructures of the powder and the coating were investigated by X-ray diffraction (XRD), scanning election microscopy (SEM), transmission election microscopy (TEM) and differential scanning calorimeter (DSC). The coating had layered morphologies due to the deposition and solidification of successive molten or half-molten splats. The microstructures of the coating consisted of a Fe–Cr-rich matrix and several kinds of borides. The Fe–Cr-rich matrix contained both amorphous phase and nanocrystalline grains with a size of 10–50 nm. The crystallization temperature of the amorphous phase was about 605 °C. The formation of the amorphous phase was attributed to the high cooling rates of molten droplets and the proper powder compositions by effective addition of Cr, Mn, Si and B. The nanocrystalline grains could result from crystallization in amorphous region or interface of the amorphous phase and borides by homogeneous and heterogeneous nucleation.     

Effects of Y concentration on luminescence properties of PbWO4 single crystals

The effects of Y³⁺ doping at different concentration on the luminescnece properties of PbWO₄ crystals have been investigated by means of Fourier transform infrared (FT-IR) spectrum, optical transmission, thermoluminescence (TL), X-ray excited luminescence (XEL), photoluminescence (PL) under excitation of UV light and light yield measurements. The series PbWO₄:Y crystal samples were grown by modified Bridgman method and the concentration of Y³⁺ in the melt was in the range of 0–1.0 mol%. The slight blue-shift and evident red-shift of the absorption edge in PbWO₄ crystal were observed at low and heavy doping concentration, respectively. TL peaks in the range of from room temperature to 250 °C disappeared after the doping with Y³⁺. With the increase of doping concentration, the luminescence intensity in the XEL and PL spectra was found to decrease accordingly, especially in the case of heavy doping. The measuring results demonstrate that Y³⁺ doping concentration below 100 ppm in the crystal seems to be the best for optimizing the optical and scintillation properties of the material. The mechanism of Y³⁺ doping concentration influence on luminescence was also discussed in this paper.