An Improved Fuzzy Unequal Clustering Algorithm for Wireless Sensor Network

This paper introduces IFUC, which is an Improved Fuzzy Unequal Clustering scheme for large scale wireless sensor networks (WSNs).It aims to balance the energy consumption and prolong the network lifetime. Our approach focuses on energy efficient clustering scheme and inter-cluster routing protocol. On the one hand, considering each node’s local information such as energy level, distance to base station and local density, we use fuzzy logic system to determine each node’s chance of becoming cluster head and estimate the cluster head competence radius. On the other hand, we use Ant Colony Optimization (ACO) method to construct the energy-aware routing between cluster heads and base station. It reduces and balances the energy consumption of cluster heads and solves the hot spots problem that occurs in multi-hop WSN routing protocol to a large extent. The validation experiment results have indicated that the proposed clustering scheme performs much better than many other methods such as LEACH, CHEF and EEUC.     

为调谐器设计的带自动幅度控制1.1GHz差分压控振荡器

为集成调谐器接收机芯片系统设计了一个带自动幅度控制回路的差分结构电容电感压控振荡器.通过采用pMOS管作为有源负阻使振荡器谐振回路可以直接接地电平,减小了寄生效应,扩大了频率调谐的线性及其范围.采用的自动幅度控制AAC回路具有元件少,噪声低,控制灵敏,调节容易,结构简单及设计方便的优点,并保证振荡器电路的性能最小地依赖于环境和制造工艺参数的变化.所设计的压控振荡器采用新加坡特许50GHz 0.35μm SiGe BiCMOS工艺流片,经测试在1MHz频率偏移处达到了-127.27dBc/Hz的相位噪声性能,具有宽的(990～1140MHz)和线性(调谐增益32.4MHz/V)的频率调谐曲线.整个振荡器电路在5V的供电电压下仅消耗6.6mA的电流,可以满足调谐器的应用需要.     

用于喇曼放大的SOI脊形波导中自由载流子寿命的解析表达

研究了用于喇曼放大的绝缘硅(SOI)脊形波导中自由载流子寿命与非线性光学损耗的关系.通过理论推导结合二维数值模拟的方法,提出了带有零反偏pin结构的SOI脊形波导中自由载流子寿命的解析表达式,该解析表达式与他人的实验结果相符.结果表明,比起不带pin结构的波导,带有零反偏pin结构的波导中的自由载流子寿命最多可以缩短80%.同时,研究了pin结构外加反偏电压时,自由载流子寿命进一步缩短的原因,并从强场下自由载流子速度饱和的角度出发,得到了自由载流子寿命的理论极限值.最后,模拟了不同自由载流子寿命情况下SOI脊形波导的喇曼净增益随着输入泵浦光功率密度的变化曲线,为硅基喇曼放大器的进一步研究指明了方向.     

一种基于差异度的极化SAR图像迭代分类方法

该文提出了一种用极化SAR数据协方差矩阵的相关性和回波功率差异来定义的目标间的差异度,并在这一差异度的基础上提出了一种新的迭代分类方法。该迭代方法与基于Wishart距离的迭代分类方法相比,不需要矩阵的求逆运算和矩阵的对数运算,降低了迭代过程的计算量,也不再需要目标的先验信息,扩展了其适用范围。该方法应用于NASA/JPL的SIR-C系统在香港地区的实测极化SAR数据,得到了很好的分类效果。     

基于肖特基栅共振隧穿三极管的器件模拟与实验分析

通过流片,制作出肖特基栅共振隧穿三极管（SGRTT） .根据ATLAS软件的模拟发现,当发射极接地,集电极接外加偏压时,栅极电压对于SGRTT的电流起到明显的控制作用.当集电极接地,栅极电压会主要影响峰值电压,其原因是栅极电压和发射极、集电极的电场分布将会改变耗尽区的分布.实验测试结果对这种现象也予以证实.     

一种低功耗4H-SiC IGBT的仿真研究

针对传统沟槽栅4H-SiC IGBT关断时间长且关断能量损耗高的问题,文中利用Silvaco TCAD设计并仿真了一种新型沟槽栅4H-SiC IGBT结构。通过在传统沟槽栅4H-SiC IGBT结构基础上进行改进,在N ⁺缓冲层中引入两组高掺杂浓度P区和N区,提高了N ⁺缓冲层施主浓度,折中了器件正向压降与关断能量损耗。在器件关断过程中,N ⁺缓冲层中处于反向偏置状态的PN结对N ^-漂移区中电场分布起到优化作用,加速了N ^-漂移区中电子抽取,在缩短器件关断时间和降低关断能量损耗的同时提升了击穿电压。Silvaco TCAD仿真结果显示,新型沟槽栅4H-SiC IGBT击穿电压为16 kV,在15 kV的耐压设计指标下,关断能量损耗低至4.63 mJ,相比传统结构降低了40.41%。     

On-demand routing and channel assignment in multi-channel mobile ad hoc networks

The capacity of mobile ad hoc networks is constrained by the intra-flow interference introduced by adjacent nodes on the same path, and inter-flow interference generated by nodes from neighboring paths. By assigning orthogonal channels to neighboring nodes, one can minimize both types of interferences and allow concurrent transmissions within the neighborhood, thus improving the throughput and delay performance of the ad hoc network. In this paper, we present three novel distributed channel assignment protocols for multi-channel mobile ad hoc networks. The proposed protocols combine channel assignment with distributed on-demand routing, and only assign channels to active nodes. They are shown to require fewer channels and exhibit lower communication, computation, and storage complexity, compared with existing approaches. Through simulation studies, we show that the proposed protocols can effectively increase throughput and reduce delay, as compared to several existing schemes, thus providing an effective solution to the low capacity problem in multi-hop wireless networks.     

双沟平面掩埋结构SLD的液相外延生长及漏电分析

对液相外延生长的双沟平面掩埋异质结（DCPBH）结构超辐射发光二极管（SLD）双沟内漏电现象进行了理论分析与定量计算。在此基础上通过优化外延结构设计与液相生长参数,得到了电流限制较理想的DCPBH结构。     

基于RFID和ZigBee技术的物联网实验系统硬件设计与实现

基于射频识别技术(Radio frequency identification technology,RFID)和近距离无线组网通讯技术(ZigBee:紫蜂)这两大物联网关键技术,设计以ZigBee协议作为传输协议的物联网主从节点以及RFID读写模块,得到了物联网实验系统的总体方案,并实现了一套完整的物联网实验系统硬件平台.测试结果验证了该实验系统完全满足设计要求,可以应用于教学实验,也可作为其他物联网应用系统的开发.     

基于扩展波数域的机载双天线干涉SAR自配准成像算法

为减少机载双天线干涉SAR繁杂的图像配准处理过程,该文提出了基于扩展波数域(K)的距离向自配准成像算法。该算法针对双天线因路径差引起的失配问题,在成像处理阶段通过采用高阶多项式拟合的手段,利用变标原理实现了图像对在距离向的精确配准。通过对仿真数据和X波段实际数据的处理,获得了较好的干涉条纹图,验证了算法的有效性。