超滤在明胶生产中的应用

本文研究了超滤在明胶生产中的应用,超滤作为初级浓缩是可行的。同时,对超滤设备、超滤膜与工艺条件作了讨论。     

高吸水性树脂的性能及应用

综述了高吸水性树脂的性能及其应用，并预测其广阔的开发前景。     

国产脱砷剂及其应用

介绍了石油烃中砷的存在形式 ,石脑油中砷含量及对催化剂的危害 ,分析了脱砷机理 ,阐述了国产脱砷剂的类型、型号、特点 ,以及选用原则与工业应用情况。     

Synthesis,characterization, and thermal properties of phosphorus‐containing,wholly aromatic thermotropic copolyesters

A series of phosphorus‐containing, wholly aromatic thermotropic copolyesters from acetylated 2‐(6‐oxide‐6H‐dibenz〈c,e〉〈1,2〉oxa phosphorin‐6‐yl)‐1,4‐dihydroxy phenylene, p‐acetoxybenzoic acid, terephthalic acid, and isophthalic acid were prepared by melting polycondensation. The structure and basic properties of the polymers, such as the glass‐transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity, were investigated with Fourier transform infrared, elemental analysis, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray diffraction, and hot‐stage polarizing optical microscopy. The copolyesters had relatively high T_g values ranging from 183 to 192°C. The T_m values obtained from DSC curves for samples P‐20 and P‐25 were 290 and 287°C, respectively (where the number in the sample name indicates the molar fraction of the phosphorus‐containing monomer in the reactants). The initial flow temperatures of other samples observed with hot‐stage polarizing microscopy were 271–290°C. The 5% degradation temperatures in nitrogen ranged from 431 to 462°C, and the char yields at 640°C were 41–52%. All the copolyesters, except P‐40, were thermotropic and nematic. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1278–1284, 2002     

通过细乳液聚合方法制备自交联型有机硅乳液

苯乙烯与甲基丙烯酸-3-三甲氧基硅丙酯(M PS)经细乳液聚合,制得了稳定的自交联型的水分散涂料,用透射电子显微镜(TEM)、动态光散射仪(DLS)和红外光谱(IR)表征了乳胶粒的形态和结构。发现与传统乳液聚合相比,细乳液聚合法可显著提高乳液的稳定性,且M PS加入量的增加会导致乳液稳定性降低。     

高层建筑塑料给水管道水压的非常规无损检测技术综述

综述了高层建筑塑料给水管道水压的非常规无损检测技术。高层建筑塑料给水管道在进行水压实验检测时,周围环境温度变化会影响实验结果,出现误差;在开始水压实验前,必须进行管道的预压处理,这样可消除管道变形产生的影响;高层建筑塑料给水管道在进行水压实验检测时,应尽可能消除所有可能产生误差的因素。以某高层房屋漏水为例,对楼上房间内的热水管道、冷水管道进行水压实验,发现热水管道质量状况出现异常,有渗漏点存在,管道在实际检测中已破损,压力降很快超出GB 50242—2016要求的0.05 MPa。     

Parametrized Maximum Principle Preserving Flux Limiters for High Order Schemes Solving Multi-Dimensional Scalar Hyperbolic Conservation Laws

In this paper, we will extend the strict maximum principle preserving flux limiting technique developed for one dimensional scalar hyperbolic conservation laws to the two-dimensional scalar problems. The parametrized flux limiters and their determination from decoupling maximum principle preserving constraint is presented in a compact way for two-dimensional problems. With the compact fashion that the decoupling is carried out, the technique can be easily applied to high order finite difference and finite volume schemes for multi-dimensional scalar hyperbolic problems. For the two-dimensional problem, the successively defined flux limiters are developed for the multi-stage total-variation-diminishing Runge–Kutta time-discretization to improve the efficiency of computation. The high order schemes with successive flux limiters provide high order approximation and maintain strict maximum principle with mild Courant-Friedrichs-Lewy constraint. Two dimensional numerical evidence is given to demonstrate the capability of the proposed approach.     

Poly(3‐chlorothiophene) films prepared by the direct electrochemical oxidation of 3‐chlorothiophene in mixed electrolytes of boron trifluoride diethyl etherate and sulfuric acid

3‐Chlorothiophene (CT) was electrochemically polymerized in mixed electrolytes of a boron trifluoride diethyl etherate solution containing 0–20% (by volume) sulfuric acid. The oxidation potentials of the monomer in these media were measured to be only 1.06–1.31 V (vs Ag/AgCl). These values were much lower than that of CT in acetonitrile and 0.1 mol/L (Bu)₄NBF₄ (1.92 V vs Ag/AgCl). Poly(3‐chlorothiophene) (PCT) films with conductivities of 0.1–2 S cm^?1 were obtained. The structure, morphology, and electrochemical behavior of the PCT films also were investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 502–509, 2003     

Water-soluble and amphiphilic polymers

Summary Three PEO-PSt-PEO triblock polymers and their parent ho-nopolystyrene have been studied by means of light scattering technique in chloroform, toluene and ethyl acetate. It has been found that the weight average molecular weights calculated by using the equation Mapp- were unbelievable negative values; and the largest deviation appeared for the sample with PEO mole content of about 50%. Data of PSt-PEO-PSt triblock polymers in literature have been quoted and discussed.