生态城市与水利现代化

对天津及其滨海新区生态城市水利建设进行了分析。研究了在淡水资源极度匮乏的条件下,有效开发利用非常规水资源的必要性、重要性和现实性。认为天津市对水资源应遵循节水、治污、高效配置,妥善处理生活、生产、生态之间的关系,力求平衡调配。供水水源应是多元的,增加非常规水资源(污水、海/咸水、雨/洪水)的利用,同时增加可用地下水,外调来水等,逐步进入可持续发展配置。     

3mm波段极近距离雷达

提出一种极近距离雷达概念，并导出其作用距离公式，在此基础上研制出一台３ｍｍ波段极近距离多普勒雷达样机．试验结果表明该雷达结构简单，成本低廉，在作用距离为零点几米至几米范围内可获得较高的定距精度．     

Microstructure study of Sm,Mn-modified PbTiO3 piezoelectric ceramics by XRD profile-fitting technique

By using the X-ray diffraction profile-fitting technique, the microstructures of Sm, Mn-modified PbTiO₃ piezoelectric ceramic discs, including ferroelectric domain sizes, microstrains, and their variations with the poling strength have been quantitatively investigated. The results manifest that the modified PbTiO₃ ceramics contain a high density of domain walls due to the presence of finely-divided coherent domain structures (tens of nanometres in dimension). The poling treament can evidently influence the domain-size distribution, with a more homogeneous microstructure being developed; however, it simultaneously causes high anisotropic microstrains within the structure which, together with the high density of domain walls, is expected to be responsible for the unusual high electromechanical coupling properties possessed by this material.     

高能气体压裂联作技术进展

国内高能气体压裂增产技术已经由单一的有壳弹、无壳弹、液体药、可控脉冲等高能气体压裂,进展到与射孔、水力压裂、酸化、化学解堵等技术相联作的综合压裂阶段。分别对高能气体压裂与射孔、水力压裂和化学解堵等联作技术的基本原理、现场试验、作业效果等进行了介绍。高能气体压裂已发展成一种基本成熟的、综合性油气田增产改造新技术。     

用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量

本文主要简述与运用AIR-C2H2原子吸收光谱法进行镉镍电池正极浸渍液中钴含量的测定，介绍了钴最佳测定条件及呈良好线性范围的浓度。同时对样品消化处理条件，在测定中样品的干扰因素进行了综合考虑，该方法具有很好的灵敏度，很好的重复性，干扰小，同时具有方法步骤简单，操作容易掌握等特点，对样品钴含量的测定，其相对标准偏差均小于1.0%（n=6），标准加入回收率均在97.0%～102.0%(n=5）范围内，结果表明，运用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量的分析，达到了实验室分析质量控制的要求，完全适用于镉镍电池正极浸渍液中钴含量的控制分析和样品系统分析。     

Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)     

A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.     

液态烃球罐安全应用探讨

液态烃常温球罐储存技术相当成熟,但在实际应用方面仍然存在许多问题,影响安全储存。针对使用过程中所了解的一些具体做法进行了分析和探讨,对球罐的改造和设计提供了必要的参考。     

曹店灌区渠道防渗衬砌技术研究

详细介绍了引黄灌区干渠衬砌试验段的设计原则、方案以及冻胀观测技术 ,根据试验结果对不同防渗材料、不同结构形式的渠道衬砌方案的使用效果及经济指标进行了分析。     

FBOLES—outline of a frequency-based on-line expert system approach for fault diagnoses in nuclear power plants

The basic concept of a novel frequency-based on-line expert system (FBOLES) approach for on-line fault diagnoses in nuclear power plants has been presented previously. This paper reports further progress, and includes how to express the uncertainties of expert opinion in knowledge-bases and propagate then in inferences, and how to deal with imperfect knowledge-bases. It also describes the main elements of FBOLES and outlines how the system works under complex conditions including the dynamic behavior of signals during accidents, multiple failures, and on-line changes of plant operation mode. Its ability to diagnose root causes of accidents has been tested using the main steam and feedwater condensate systems of a full-scale, three-loop, 950 MW nuclear power plant simulated by the Tsinghua simulator. So far the results seem good.