煤矿破碎机人员安全探测系统的研制

文中给出了煤矿人员安全探测系统设计的性能要求，详细介绍系统的硬件设计和软件设计。对利用热释电传感器实现人员定位与移动相对位置匹配算法设计进行深入细致的讨论．从防止漏报警、提高系统可靠性和降低系统功耗三个方面探讨了设计中涉及到的关键技术及其具体解决方法、与其他报警和定位系统相比，系统具有结构简单、成本低、功耗小、定位准确的特点。     

基于μC/GUI的嵌入式图形界面设计

μC／GUI是一种基于嵌入式应用的通用图形接口软件，文章在详细介绍μC／GUI特点的基础上给出了基于NHC_01型彩色液晶模块的移植实例，并提供了液晶模块与ARM7内核处理器的硬件接口框图。通过分析μC／GUI的动态内存管理机制，给出了一种基于窗口的嵌入式通用图形界面设计方法。     

基于USB的155 Mb/s码型发生器的研制

介绍了一种带USB接口的光的155Mb／s码型发生器。伪随机码和其他格式的码型由PC产生通过USB接口进入双口RAM，再经串并变换后由光发射模块发射。该系统可方便地设定各种格式的码型，并同时具备光接口和电接口，可广泛应用于光通信各种实验中，具有重要的实用价值。     

Research on charge ordering and magnetic properties in La0.3Ca0.7Mn1-xWxO3 system

The perovskite manganite sample La0.3Ca0.7Mn1-xWxO3 （x = 0.08, 0.12） was prepared by the solid-state reaction method. The effect of W doping on the Mn site to La0.3Ca0.7MnO3 charge ordering phase and the changing process of magnetic properties were studied through the measurement of the M-T curve, M-H curves, and ESR curves of the sample. The results showed that when x = 0.08, the charge ordering （CO） phase exists in the system, the transition temperature Tco= 275 K, and the system exhibits PM when T 〉 275 K. The system transforms from spin-disordering paramagnetism to spin-ordering antiferromagnetism in the charge ordering state with the temperature decreasing from 275 K to 230 K. The long-range antiferromagnetism forms and AFM/CO states coexist between 230 K and 5 K. There is a little ferromagnetic component in the AFM/CO background in a low temperature range. When x = 0.12, the CO phase in the system has almost melted completely. There is a little remnant of the CO phase below 150 K. The system exhibits paramagnetism when T 〉 150 K and transforms from paramagnetism to ferromagnetism when T〈 150 K.     

粉煤灰降失水水泥浆在天然气井固井中的研究与应用

长庆天然气田属于低压、低渗透气田,存在承压能力较低的地层,固井设计要求全井段封固,并且采用双级双凝施工工艺。但由于用于低密度水泥浆中的漂珠生产量降低,价格上升,研究应用替代产品是固井技术发展的方向。在一级领浆中研究应用了粉煤灰水泥浆体系,其性能和固井质量可完全满足固井要求。粉煤灰水泥浆体系价格低和固井质量优良,使其成为漂珠水泥浆体系的替代配方。     

Time Characterization of High Density Gas Jet from a Pulsed Supersonic Nozzle via Laser Produced Plasma

A high-density gas jet supersonic nozzle is reported in this paper. The jitter and actuation time of the nozzle is determined by the pin discharge and laser spark radiation respectively. The jitter time of the nozzle is within 10μs with the backing pressure as high as 25 bar. With a nanosecond laser pulse focused on the gas jet about 1 mm below the nozzle, the actuation time is calculated to be about 15 ms by detecting the laser produced spark radiation, which reveals the existence of the gas jet and the relative gas density evolving with time. Consequently the gas density is estimated to be well above 10^19 cm^-3, compared with theoretical simulations from the nozzle parameters.     

Al2O3对镁铬耐火材料致密化的影响

为了提高镁铬耐火材料的烧结性能,通过考察气孔率、体积密度和常温耐压强度与Al2O3加入量之间的关系,讨论了Al2O3添加剂对两种不同镁铬耐火材料致密化的影响.结果表明,镁铬耐火材料的骨料不同,Al2O3对其烧结性能和致密化的影响也不一样.     

喷墨打印相纸及打印图像质量的分析

喷墨打印相纸随着数码相机的发展近几年在国内发展迅速。针对目前产品质量没有测量标准的现状,提出喷墨相纸的质量指标主要为4个,即白度、光泽度、油墨吸收性和防水性。给出了相应的测量方法。并指出相纸上油墨点的面积是衡量质量的第一重要指标,其次是点的圆度。另外对图像输出的质量介绍了一种科学的评价方法,即图像的逼真性分析。说明图像的打印墨点直径不应小于方形像素的对角线长,图像才能真实再现。