2007年上半年三大合成材料价格走势回顾与分析及下半年预测

回顾并分析了2007年上半年三大合成材料价格变化情况及其原因,预测了2007年下半年三大合成材料的价格走势.     

超声波处理微污染水体技术研究

考察了用超声波降解水中低浓度三氯乙腈、氯代苦味碱、溴苯的动力学，并从工程角度分析了多种污染物共存、自然水体等复杂状态下的可行性。探讨了采用空气鼓泡、不控水温的操作方式。结果表明超声波可以较快地去除复杂水体中的多种有机污染物，氧化可在批式反应器与连续流反应器中进行，高流速可以提高反应器的空间与能量利用效率。     

Mercury transformation across particulate control devices in six power plants of China: The co-effect of chlorine and ash composition

This paper presents the results of field measurements on mercury speciation in six power plants of China by applying the Ontario hydro method. During the tests, flue gas was sampled simultaneously before and after particulate control devices (electrostatic precipitator and fabric filter baghouse) along with the pulverized coal, bottom ash and fly ash sampling. The amount of oxidized mercury in gas phase before and after ESP/FF suggests that mercury oxidation after combustion is a kinetically controlled process. The comparison of mercury speciation in different power plant indicates a clear relationship with coal type, especially the chlorine concentration and the basic ash compositions in coal. Both of the factors are analyzed quantitatively in this study. A new parameter C (ratio of chlorine in coal to base/acid ratio) has been introduced to evaluate the co-effect of the two factors above on mercury speciation.     

Relating the molecular structure and crystallization behavior of polypropylene

The crystallization behavior of two polypropylene (PP) resins as used for biaxially oriented polypropylene (BOPP) and general injection mold applications, respectively, has been intensively investigated and compared by means of polarized light optical micrography (POM), differential scanning calorimetry (DSC), conventional transmission electron microscopy (TEM), and high resolution transmission electron microscopy (HRTEM). It is found that both molecular weight distribution and isotacticity of polypropylene strongly affect its crystallization characteristics, e.g., the number of crystal nuclei at the initial stage, crystallization dynamics, the morphology, size and perfection of crystals in the final product, and so on. The results indicate an appropriate molecular structure is vital in producing high‐quality BOPP film. Polym. Eng. Sci. 44:1749–1754, 2004. © 2004 Society of Plastics Engineers.     

β-萘乙醚的合成中催化剂应用进展

β-萘乙醚是一种合成香料,广泛用于生产香皂、化妆品和洗涤剂等行业中,还可以作玫瑰香、柠檬香等香料的定香剂.综述了酸性催化剂、碱性催化剂和相转移催化剂等催化合成β-萘乙醚的方法.并对各催化剂的性能、优缺点进行了分析.通过比较发现与其它催化剂相比,使用固载相转移催化剂来合成β-萘乙醚具有反应条件温和,反应时间短,产率高,操作简单,不污染环境,而且易回收并能够重复使用,具有较好的应用前景.     

饲料级磷酸氢钙标准样品的研制

简述了饲料级磷酸氢钙标准样品的研制过程，并对样品作了稳定性试验，对搅拌设备的搅拌均匀性和物料的均匀性进行了测定，并由国家认可实验室进行了定值数据的监测。通过对比实验证明了国家实验室之间的无差异性。实验数据表明了所测定的饲料级磷酸氢钙产品是稳定和均匀的，同时简要介绍标准样品的研制程序，为开发其他化工行业标准样品奠定了基础。     

黑液中的多糖对合成本素胺乳化剂的影响

直接以浓缩黑液为原料，通过环氧氯丙烷引入季铵基团制取阳离子型木素胺乳化剂。对产品和原料黑液做了剖析，证明黑液中的非本素有机物发生了胺化反应．应用试验证明这部分胺化产物具有助乳化和稳定乳液的作用。     

NIT-Ph-p-BEN氮氧自由基的制备及催化降解性

以对醛基苯甲酸为原料，通过醛酸与2,3-二甲基-2,3-二羟胺基丁烷缩合，再经NaIO4氧化最终制得4-(4,4,5,5-四甲基-1,3-二氧化物)咪唑基-1-苯甲酸（NIT-Ph-p-BEN氮氧自由基）。采用FTIR、UV、ERP（电子顺磁共振波谱仪）和元素分析等对其结构进行表征；通过催化降解废水中有机染料甲基橙、甲基蓝和罗丹明B对其催化活性进行了评估。结果表明，当甲基橙、甲基蓝和罗丹明B浓度为15 mg/L，NIT-Ph-p-BEN质量浓度为0.15 g/L，H2O2浓度为30 mmol/L时，NIT-Ph-p-BEN对甲基橙有更好的催化降解性，仅在1 h内甲基橙的降解率达到94.26%。此外，反应机理表明，H2O2有助于实现NIT-Ph-p-BEN自由基的再生和循环利用。     

Prediction of particle motion in a two-dimensional bubbling fluidized bed using discrete hard-sphere model

The solids motion in a gas-solid fluidized bed was investigated using a discrete hard-sphere model. Detailed collision between particles and a nearest list method are presented. The turbulent viscosity of gas phase was predicted by subgrid scale (SGS) model. The interaction between gas and particles phases was governed by Newton's third law. The distributions of concentration, velocity and granular temperature of particles are obtained. The radial distribution function is calculated from the simulated spatio-temporal particle distribution. The normal and shear stresses of particles are predicted from the simulated instantaneous particle velocity. The pressure and viscosity of particles are obtained from both the kinetic theory of granular flow and the calculated stresses of particles. For elastic particles the individual lateral and vertical particle velocity distribution functions are isotropic and Maxwellian. The observed anisotropy becomes more pronounced with increasing degree of inelasticity of the particles.