频率/待测量变换的GAL、ERROM设计方法

本文提出了以通用阵列逻辑器件 GAL 和只读存贮器 EPROM 为核心器件的频率/待测量变换的设计方法。配以数字式传感器及用最小二乘法编制的曲线自动分段拟合程序生成的 EPROM 中的数据,可用于力、温度、光强等非电量的测量显示和控制。这种装置与采用微处理器的电路相比,有相同的测量精度,电路简单,而且保密性好.     

电子商务环境下企业资源计划(ERP)的新进展

分析了在电子商务环境下企业资源计划 (ERP)需求的新特点 ,并结合ERP发展和实际应用中存在的问题 ,论述了ERP与电子商务集成化的发展方向 ,提出了企业关系管理 (ERM )的基本框架和建立商业网络 (BN)的必要性。同时 ,还论述了ERP系统在网络化、模块化和智能化的发展方向和最新进展。     

Influence of rubber content in ABS in wide range on the mechanical properties and morphology of PC/ABS blends with different composition

A series of acrylonitrile–butadiene–styrene (ABS) with different rubber content were prepared by diluting ABS grafting copolymer containing 60% rubber with a styrene–acrylonitrile copolymer. ABS prepared were blended with bisphenol‐A‐polycarbonate (PC) at the ratio of 70/30, 50/50, and 30/70 to prepare PC/ABS blends. Influence of rubber content in ABS on the properties of ABS and PC/ABS blends were investigated. PC/ABS blends with different compositions got good toughness when the rubber in ABS increased to the level that ABS itself got good toughness. The tensile properties and processability of PC/ABS blends decreased with the increase of the total rubber content introduced into the blends. ABS with the rubber content of 30 wt% is most suitable to be used to prepare PC/ABS blends. The rubber content in ABS affected the viscosity of ABS, and subsequently the viscosity ratio of PC to ABS. As a result, the morphology of PC/ABS blends varied. The increase of rubber content in ABS results in finer structure of PC/ABS blends. POLYM. ENG. SCI. 46:1476–1484, 2006. © 2006 Society of Plastics Engineers.     

The transformation of aluminium species in the processes of coagulation, sedimentation and filtration.

The aluminium toxicity is closely related to aluminium species. In this work aluminium was fractionated into seven forms: Al(T), Al(Sus), Al(C + S), Al(S), Al(C), Al(O) and Al(I). Four Al-based coagulants and simulated raw water were used in the laboratory to investigate the aluminium transformation in coagulation, sedimentation and filtration processes. It is the use of Al-based coagulants that contributes more to the increase of the residual aluminium for the low-turbidity raw water, while the Al-based coagulants, especially the polymeric aluminium coagulants, work to remove the aluminium from the high-turbidity raw water. In the case of traditional coagulants, the increase of the turbidity or the dissolved organic carbon (DOC) concentration in the raw water results in a high concentration of Al(C + S). The removal rate of aluminium species in the filtration process is not only related to its size: RAl(Sus) > RAl(C+S), RAl(C) > RAl(S), but also to the physicochemical properties of aluminium species and filter. For the kaolin-polyaluminium chloride system, a lower removal rate of aluminium species results is due to the complexation of humic acid and aluminium species.     

Boundary Constrained Swept Surfaces for Modelling and Animation

Due to their simplicity and intuitiveness, swept surfaces are widely used in many surface modelling applications. In this paper, we present a versatile swept surface technique called the boundary constrained swept surfaces. The most distinct feature is its ability to satisfy boundary constraints, including the shape and tangent conditions at the boundaries of a swept surface. This permits significantly varying surfaces to be both modelled and smoothly assembled, leading to the construction of complex objects. The representation, similar to an ordinary swept surface, is analytical in nature and thus it is light in storage cost and numerically very stable to compute. We also introduce a number of useful shape manipulation tools, such as sculpting forces, to deform a surface both locally and globally. In addition to being a complementary method to the mainstream surface modelling and deformation techniques, we have found it very effective in automatically rebuilding existing complex models. Model reconstruction is arguably one of the most laborious and expensive tasks in modelling complex animated characters. We demonstrate how our technique can be used to automate this process.     

Kernel-based least squares policy iteration for reinforcement learning.

In this paper, we present a kernel-based least squares policy iteration (KLSPI) algorithm for reinforcement learning (RL) in large or continuous state spaces, which can be used to realize adaptive feedback control of uncertain dynamic systems. By using KLSPI, near-optimal control policies can be obtained without much a priori knowledge on dynamic models of control plants. In KLSPI, Mercer kernels are used in the policy evaluation of a policy iteration process, where a new kernel-based least squares temporal-difference algorithm called KLSTD-Q is proposed for efficient policy evaluation. To keep the sparsity and improve the generalization ability of KLSTD-Q solutions, a kernel sparsification procedure based on approximate linear dependency (ALD) is performed. Compared to the previous works on approximate RL methods, KLSPI makes two progresses to eliminate the main difficulties of existing results. One is the better convergence and (near) optimality guarantee by using the KLSTD-Q algorithm for policy evaluation with high precision. The other is the automatic feature selection using the ALD-based kernel sparsification. Therefore, the KLSPI algorithm provides a general RL method with generalization performance and convergence guarantee for large-scale Markov decision problems (MDPs). Experimental results on a typical RL task for a stochastic chain problem demonstrate that KLSPI can consistently achieve better learning efficiency and policy quality than the previous least squares policy iteration (LSPI) algorithm. Furthermore, the KLSPI method was also evaluated on two nonlinear feedback control problems, including a ship heading control problem and the swing up control of a double-link underactuated pendulum called acrobot. Simulation results illustrate that the proposed method can optimize controller performance using little a priori information of uncertain dynamic systems. It is also demonstrated that KLSPI can be applied to online learning control by incorporating an initial controller to ensure online performance.     

Optimal Conditions for Preparing Ultra-Fine CeO2 Powders in A Submerged Circulative Impinging Stream Reactor

Cerium carbonate powders were produced in a submerged circulation impinging stream reactor (SCISR) from Ce(NO3)3·6H2O. NH4HCO3 was used as a precipitant in the reaction. Cerium carbonate powders were roasted to produce ultra-fine cerium dioxide (CeO2) powders. The optimal conditions of such production process were obtained by orthogonal and one-factor experiments. The results showed that ultra-fine and narrowly distributed cerium carbonate powders were produced under the optimal flowing conditions. The concentrations of Ce(NO3)3 and NH4HCO3 solutions were 0.25 and 0.3 mol·L-1, respectively. The concentration of PEG4000 added in these two solutions was 4 g·L-1. The stirring ratio, reaction temperature, feeding time, solution pH, reaction time and digestion time were 900 r·min-1, 80 ℃, 20 min, 5～6, 5 min and 1 h, respectively. The final product, CeO2 powders, was obtained by roasting the produced cerium carbonate in air for 3 h at 500 ℃. The finally produced CeO2 powders were torispherical particles with a narrow size distribution of 0.8～2.5 μm. The crystal structure of CeO2 powders belonged to cubic crystal system and its space point group was O5H-FM3M. Under optimal conditions, powders produced by SCISR were finer and more narrowly distributed than that by Stirred Tank Reactor (STR).     

提供宽范围负载阻抗的有源可变电阻器

功率电阻、可变电阻和其他电子负载常常用于测试电源和电压调节器,如图1所示.虽然功能和机械电位器相同,但它基于有源器件,能够提供很宽的负载电阻范围,阻值调节分辨率高,发热比机械电位器少.     

军械调运方案优化算法的设计与仿真

军械调运问题的数学模型和手工算法过去已有研究,但是当问题较为复杂时,手工算法就要花费大量时间而且准确性也难以保证。针对这一缺陷,本文在已有的数学模型和手工算法的基础上,设计了一种可以用计算机实现的基于递归的算法来寻求军械紧急调运问题的最优方案,并使用面向对象的java语言将算法实现。     

Interpersonal underpinnings of request strategies: General principles and differences due to culture and gender.

Several hypotheses derived from P. Brown and S. Levinson's (1987) politeness theory were tested with Ss from the US and Korea. Ss imagined themselves in situations in which they were to make a request. Ss then indicated exactly what they would say in each situation and what their perceptions of the request size, the hearer's power, and the closeness of their relationship with the hearer were. Consistent with Brown and Levinson's theory, power, distance, and size contributed significantly to politeness. Significant predictor variable interactions suggested that an additive model is not appropriate. Finally, there was evidence of cultural and gender differences in the weighting of these predictor variables. These differences can partially account for cultural and gender differences in language use. (PsycINFO Database Record (c) 2010 APA, all rights reserved)