Oxidative dehydrogenation of ethane over Co–BaCO3 catalysts using CO2 as oxidant: effects of Co promoter

Co–BaCO₃ catalysts exhibited high catalytic performance for oxidative dehydrogenation of ethane (ODE) using CO₂ as oxidant. The maximal formation rate of C₂H₄ was 0.264 mmol · min⁻¹ · (g · cat.)⁻¹ (48.0% C₂H₆ conversion, 92.2% C₂H₄ selectivity, 44.3% C₂H₄ yield) on 7 wt% Co–BaCO₃ catalyst at 650 °C and 6000 ml. (g · cat.)⁻¹. h⁻¹. Co–BaCO₃ catalysts were comparatively characterized by XRF, N₂ isotherm adsorption-desorption, XRD, H₂-TPR and LRs. It was found that Co⁴⁺–O species were active sites on these catalysts in ODE with CO₂. The redox cycle of Co–O species played an important role on the catalytic performance of Co–BaCO₃ catalysts. On the other hand, the co-operation of BaCO₃ and BaCoO₃ was considered to be one of possible reasons for the high catalytic activity of these catalysts.     

合体女裤提臀结构设计的探讨

首先用问卷调查的方式得到人们对合体裤提臀的要求,主要表现在臀突感、臀下以及臀后与人体的贴合度上;其后对6款样裤进行了拓版,得到影响提臀效果的结构设计参数.在此基础上用实验法得出结果:在合体裤制版参数常用取值范围内,总裆宽越小,后上裆倾斜角越大,前后裆宽比越小,裤子的提臀效果越好;通过美观性与舒适性的评价,得出兼顾两者的参数配置.     

Mullitization of high-alumina refractory raw material

Conclusions The stability of the phase composition of sintered material, essential for production processes, is achieved by firing at 1600° for a brief period.Materials made of Novaya Selitsa kaolin, and particularly Arkalyk rock, of which very intensive mullitization is typical, are exceptionally valuable argillaceous components for charges for making high-alumina refractories by the present system of technology (on the basis of charges composed of refractory clays and commercial alumina).     

Effects of laser heat treatment on the fracture morphologies of X80 pipeline steel welded joints by stress corrosion

The surfaces of X80 pipeline steel welded joints were processed with a CO2 laser, and the effects of laser heat treatment （LHT） on H2S stress corrosion in the National Association of Corrosion Engineers （NACE） solution were analyzed by a slow strain rate test. The fracture morphologies and chemical components of corrosive products before and after LHT were analyzed by scanning electron microscopy and energy-dispersive spectroscopy, respectively, and the mechanism of LHT on stress corrosion cracking was discussed. Results showed that the fracture for welded joints was brittle in its original state, while it was transformed to a ductile fracture after LHT. The tendencies of hydrogen-induced corrosion were reduced, and the stress corrosion sensitivity index decreased from 35.2% to 25.3%, indicating that the stress corrosion resistance of X80 pipeline steel welded joints has been improved by LHT.     

水平切片解释方法在焦作井田构造复杂区的应用

河南焦作某矿地处焦作煤田东部,该矿东三盘区地质构造复杂,主采的2号煤层底板与L_8灰岩平均间距仅20m,与奥灰顶界面平均间距约100m,因此断层的存在极易导通奥灰水,形成较大的水患事故。故查明区内构造分布情况十分必要。本文重点介绍了用三维地震常规解释方法结合偏移及方差数据体水平切片解释方法在构造复杂区的应用情况,具有一定的推广意义。     

Engineering all-aromatic polyamide surface from hydrophilic to superhydrophobic and the accelerated strategy

Being a new kind of nanomaterials, aromatic polyamide nanofibers (ANF) have been much highlighted in recent studies. We here demonstrate an isopropyl alcohol (IPA) accelerated chemical cleavage on poly (p-phenylene terephthalamide) chopped fibers, which provides an efficient preparation method of ANF. The comprehensive study on the processes accelerated by different alcohols revealed that the preparation time of ANF in the mixed medium of dimethyl sulfoxide (DMSO)-alcohol (20:1 in volume) was shorten to 45 min and 75 min for methanol (ethanol) and isopropanol, respectively. However, the nanofibers prepared in DMSO-IPA exhibited the minimum in axial and radial dimensions, providing the finest and most uniform diameter of 16 nm. The corresponding ANF films through vacuum assisted filtration also showed the highest tensile strength of 150 MPa, in comparison with those of the ANF films prepared using other alcohols, which were about 110 MPa. Furthermore, ANF/silicon hybrid films were prepared by the ionic ring-opening reaction followed by the alkoxysilane condensation and nanoparticle fabrication. By changing the organo functional groups in the alkoxysilane, the surface of the films were adjustable in a wide contact angle range from 56° (hydrophilic) to 150° (superhydrophobic), suggesting the amendable interfacial properties potential applicable to composite fabrication with most of the resin matrix.     

The effects of carbon content in steel on the diffusion rate of chromium

Conclusions Thermal diffusion chromizing in metallic chromium under vacuum promotes impregnation and produces a thicker layer than in chromizing by means of a powder mixture only in steel with a maximum content of 0.2% C at 1100°C and higher.     

依托网络教学平台 提高课堂教学效果

网络教学作为一种新的辅助教学手段,是目前教学改革主要研究的方向之一。通过对网络教学平台的功能分析,探讨了在网络教学平台上进行教学资源的建设、交流互动教学活动的开展和虚拟实验室的建设,通过应用实践证明,充分利用网络教学平台的优势,能有效地提高课堂教学质量和效率,培养学生的学习能力、实践能力和创新能力。     

计算机在高校实验室管理中的应用

计算机技术的迅速发展给人们的生活学习及工作带来了很多便利,并且计算机技术已经被广泛应用到了各个领域中。本文就计算机在高校实验室管理应用中的问题进行了分析和讨论。