水性聚氨酯材料配方设计技巧

介绍了优选法的0.618法和分数法,对其进行改进创新和原理证明,并应用于生产涂料配方设计中。     

环己烷液相无催化剂的氧化动力学研究

采用搅拌釜反应器,在确认已排除传质因素对反应速率影响的情况下,研究了环己烷液相无催化剂的氧化反应动力学。应用自由基理论及最优化计算技术,从导出的8个候选动力学模型中,确定了最佳的动力学模型,它能满意地描述环已烷氧化过程。该动力学可为环己烷氧化工业生产操作条件的优化、反应器的选型及工业设计提供依据。     

Improvement of Microwave Loss Tangent and Tunability of Ba0.55Sr0.45TiO3/MgO Composites Using the Heterogeneous Precipitation Method

Ba_0.55Sr_0.45TiO₃/MgO composites were successfully prepared by the heterogeneous precipitation method and their structural, surface morphological, tunable properties, and dielectric properties at microwave frequency were systemically investigated. Compared with the sample prepared by the traditional solid-state method, the sample prepared by the heterogeneous precipitation method exhibits a smaller grain size, more uniform microstructure, higher tunability, and lower microwave loss, and these properties are very beneficial to the development of the microwave tunable devices application. Moreover, the effects of La₂O₃ doping on the dielectric and tunable properties of BST/MgO composites are investigated. The result shows that the La³⁺-doped sample has higher tunability and lower microwave loss than the undoped one.     

新型节能玻璃钢门窗的研究

本文主要围绕节能主题，从能耗方式、性能指标、结构形式、制作安装等方面论述了玻璃钢门窗在不同气候地区、不同环境和不同领域中的开发和应用。     

玻璃钢筋混凝土的有限元计算与试验

钢筋混凝土广泛应用于土木工程领域，但其结构耐久性因钢筋本身的锈蚀成为现今急待解决的问题。人们一直在寻找对钢筋混凝土进行改良的途径，用玻璃钢筋代替普通钢筋是解决这一问题的一个有效的方法，为此进行了试验和ANSYS有限元分析，结果证明此法具有可行性。     

陶瓷坯体增强剂聚丙烯酸钠在艺术瓷成形过程的应用

本文合成了一系列不同相对分子质量的聚丙烯酸钠,应用于艺术瓷的坯体中,研究了聚丙烯酸钠对艺术瓷坯体强度、变形率的影响,并对聚丙烯酸钠增强机理进行了探讨。结果表明:聚丙烯酸钠可有效地提高艺术瓷坯体的成形强度,减少了坯体的变形率,当增强剂c加入的质量分数为0.6%时,坯体的干燥强度增加率达167.5%,坯体的变形率从50%降低到10%。     

A survey of traffic-based routing metrics in family of expected transmission count for self-organizing networks

Self-Organizing Networks (SONs) are attractive for applications where flexibility, resilience, and a large network service area are required. In order to meet the requirements of those applications, the principal issue is to guarantee efficient routing in SONs. Hence, the design and selection of appropriate routing metrics is important. A mass of metrics have been proposed in the past several decades. Among all the metrics, Expected Transmission Count (ETX) has drawn the most attention. Since the proposal of ETX, many ETX-based or extended metrics have been proposed. ETX and its descendants compose the ETX family. This paper is an attempt to analyze, compare and summarize traffic-based routing metrics in the ETX family. Details of each routing metric are presented and analyzed. Some of our viewpoints on the principal for designing metrics in SONs are presented.     

Synthesis and Morphology of TiO2 Nanotube Arrays by Anodic Oxidation Using Modified Glycerol-Based Electrolytes

Titanium dioxide (TiO₂) nanotube arrays were prepared by electrochemical anodization of titanium sheets in the glycerol 176 mL/H₂O 44 mL/NH₄F 0.5 wt% electrolytes modified with H₂SO₄ and NaAc addition. The surface morphologies, average inner diameter, and the length of the nanotube arrays changed with the solution pH in the range from 5.6 to 4.0 by adding H₂SO₄. A uniform surface morphology of the nanotubes with average inner diameter of ∼80 nm and a length of ∼1000 nm was obtained when the solution pH was 5.0. The growth rates of the nanotubes were remarkably enhanced by NaAc addition in the range of 0.04–0.14 M . With NaAc addition of 0.10 M , the length of the nanotube arrays reached 4.16 μm after an 8-h anodization, increasing 3.23 μm compared with no NaAc addition. The relationship between solution pH and growth of TiO₂ nanotubes was analyzed by current–time curves, solution electrical conductivities, and scanning electron microscopy (SEM), and the role of NaAc was also discussed based on SEM and solution electrical conductivities.     

二聚炔醇酸性介质缓蚀剂的合成与应用

对二聚炔醇化合物ＤＭＨ的合成、分子结构及缓蚀作用机理进行了论述。因ＤＭＨ化合物具有独特的分子结构，形成了稳定的络合体系及基团的屏蔽效应，增加了缓蚀被膜厚度及缓蚀体系的化学稳定性，实验证实ＤＭＨ是酸性介质中的高效缓蚀剂。