188Re-HEDP注射液药物代谢动力学研究

将药物静脉注射到动物体内 ,以观察188Re -HEDP注射液在动物体内代谢动力学的特征。结果表明 ,滞留在荷瘤大鼠患骨中的放射性比在正常骨中的多 (P <0 .0 5 ) ;小鼠 72h内排泄放射性累积百分率约为 82 %(其中尿液排泄为 80 %) ;体外血浆蛋白结合率为 86 .4 %± 0 .30 %。说明该药物是亲骨药物 ,血清除快符合药物代谢动力学二室模型 ,大部分的药物以原形从肾排出。     

La doping effects on intergrowth Bi2WO6–Bi3TiNbO9 ferroelectrics

La doping effects on intergrowth Bi₂WO₆–Bi₃TiNbO₉ ferroelectric ceramics were studied by X-ray diffraction, electron probe microanalysis and dielectric spectroscopy. It was found that the La³⁺ distribution, ferroelectric phase transition and dielectric relaxation behavior are apparently affected by La doping. With increasing La³⁺ content, the site of dopant ion varies, the grain growth of Bi₅TiNbWO₁₅ is restrained, the Curie temperature is reduced and broadened. Furthermore, two dielectric relaxation loss peaks were observed both in temperature and frequency spectra. The calculated relaxation parameters revealed the oxygen vacancy related to the relaxation process.     

The thermal behavior of mechanically activated galena by thermogravimetry analysis

The thermal decompositions of mechanically activated and nonactivated galenas were studied by thermogravimetry analysis (TGA) at the heating rate of 10 K min⁻¹ in argon. Results indicate that the initial temperature of thermal decomposition (abbreviated as T _di) in the TGA curves for different galenas decreases gradually with increased grinding time. The specific granulometric surface area (S _G), the structural disorder, and the content of elemental sulfur of mechanically activated galenas were analyzed by an X-ray diffraction (XRD) laser particle-size analyzer, XRD analysis, and the gravimetric method, respectively, which shows that the specific granulometric surface area of mechanically activated galenas remains almost constant after a certain grinding time, but the lattice distortions (ε) rise, the crystallite sizes (D) decrease, and the elemental sulfur contents of mechanically activated galenas increase with increased grinding time. The results imply that the decrease of the initial temperature of thermal decomposition in the TGA curves for mechanically activated galenas is mainly caused by the increase of lattice distortions, and the formation of new dangling bonds resulted from the production of elemental sulfur of mechanically activated galenas with increased grinding time. Finally, the differences in the thermal-decomposition reactivity between nonactivated and mechanically activated galenas were also discussed.     

拉伸试验测量不确定度的研究

分析了拉伸试验中抗拉强度Rm的影响因素，对测量不确定度的主要分量进行量化，评定了Rm的相对测量不确定度，作为生产检验中评定测量不确定度的尝试，以便为用户提供钢材性能测量结果的不确定度。     

自蔓延高温合成TiNi多孔体合金

为了开发新型的生体材料，本文对自蔓延高温合成TiNi多孔体合金——人造骨材料进行了研究。以单质钛粉和镍粉作原料，在氩气保护条件下，采用预热点燃模式和热爆模式制得了不同形态的多孔TiNi形状记忆合金。采用SEM和XRD分析了样品的孔洞特征和相组成，测试了其力学性能，并研究了合成条件参数与样品表面形貌和孔隙状态之间的关系。结果表明，用SHS法制备TiNi多孔体合金是可行的。     

阜新市细河改造工程坝基渗漏计算及处理效果分析

阜新市细河改造工程由四座橡胶坝和两岸防洪大堤组成，由于堤(坝)基第四系冲洪积层广泛发育，存在渗漏同题。合理选择施工处理方案，是工程成功的关键。作者根据场区不同的地质条件环境条件采取有针对性的不同处理方案，既解决了防渗问题又缩短了施工工期，降低工程造价，取得了很好的经济效益和社会效益。     

Analysis and Optimization of the Energy Efficiency in the 802.11 DCF

This paper introduces an analytical model to investigate the energy efficiency of the IEEE 802.11 distributed coordinated function (DCF). This model not only accounts for the number of contending nodes, the contention window, but also the packet size, and the channel condition. Based on this model, we identify the tradeoff in choosing optimum parameters to optimize the energy efficiency of DCF in the error-prone environment. The effects of contention window and packet size on the energy efficiency are examined and compared for both DCF basic scheme and DCF with four-way handshaking. The maximum energy efficiency can be obtained by combining both the optimal packet size and optimal contention window. To validate our analysis, we have done extensive simulations in ns-2, and simulation results seem to match well with the presented analytical results. The Ohio Board of Regents Doctoral Enhancements Funds and the National Science Foundation under Grant CCR 0113361 have supported this work. Xiaodong Wang received his B.S. degree in communication engineering from Beijing Information Technical Institute of China in 1995, and his M.S. degree in electric engineering from Beijing University of Aeronautics and Astronautics of China in 1998. He joined China Telecom in 1998 where he worked on communication protocols for telecommunication. From June 2000 to July 2002, he worked on GSM base station software development at Bell-labs China, Beijing, China. Currently he is a Ph.D. student in Computer Engineering at University of Cincinnati. His research activities include wireless MAC protocols, energy saving for wireless sensor networks. He is a student member of the IEEE. Jun Yin received the BS degree in automatic control from Dalian Railway Institute of China in 1997, and the MS degree in flight control from Beijing University of Aeronautics and Astronautics of China in 2001. Since 2001 she has been a Ph.D. student in the OBR Research Center for Distributed and Mobile Computing at the University of Cincinnati. Her research interests include performance evaluation of 802.11 MAC protocol, wireless ad hoc networks and sensor networks. She is a student member of the IEEE. Dharma P.Agrawal IEEE Fellow, 1987; ACM Fellow, 1998; AAAS Fellow, 2003 Dr. Agrawal is the Ohio Board of Regents Distinguished Professor of Computer Science and Computer Engineering in the department of Electrical and Computer Engineering and Computer Science, University of Cincinnati, OH. He has been a faculty member at Wayne State University, (1977–1982) and North Carolina State University (1982–1998). He has been a consultant to the General Dynamics Land Systems Division, Battelle, Inc., and the U. S. Army. He has held visiting appointment at AIRMICS, Atlanta, GA, and the AT&T Advanced Communications Laboratory, Whippany, NJ. He has published a number of papers in the areas of Parallel System Architecture, Multi computer Networks, Routing Techniques, Parallelism Detection and Scheduling Techniques, Reliability of Real-Time Distributed Systems, Modeling of C-MOS Circuits, and Computer Arithmetic. His recent research interest includes energy efficient routing, information retrieval, and secured communication in ad hoc and sensor networks, effective handoff handling and multicasting in integrated wireless networks, interference analysis in piconets and routing in scatternet, use of smart directional antennas (multibeam) for enhanced QoS, Scheduling of periodic real-time applications and automatic load balancing in heterogeneous workstation environment. He has four approved patents and three patent filings in the area of wireless cellular networks.     

一种新的HEMT小信号模型参数提取方法

介绍了一种高电子迁移率晶体管(HEMT)的小信号参数提取方法——综合多偏置点优化参数提取法。该文首先推导并提出了器件的模型、确定外部参数和内部参数，其次介绍了多偏置点优化算法。最后，以PHEMT器件为例进行鲁棒性和精确性测试，实验采用一系列随机起始值，结果表明，提取的参数值与经验值相差小于1％。     

水性涂料VOC测定偏差对计算结果的影响

阐述水性涂料VOC的三项测定偏差对计算VOC结果的影响 ,指出国内现有标准的检测方法与国际标准方法存在的差距     

图形电镀铜的常见缺陷及故障排除

本文主要阐述印制电路板生产中图形电镀铜常见缺陷及成因,查找影响其品质的因素和工序并结合相关生产制定相应的预防措施,有效提高产品质量。