一种基于H.235协议的关守消息认证机制

首先对基于用户秘密散列签名的关守消息认证机制做了简单介绍,然后针对该机制的不足之处提出了一种基于H.235协议的改进方法,具有安全性高,速度快,管理方便等优点.     

高密度互连印制板

本文阐述了RCC材料与化学蚀刻法制作高密度互连印制板的工序和详细方法,意在探寻最为经济、简单而又行 之有效的工艺。     

Analysis and Optimization of the Energy Efficiency in the 802.11 DCF

This paper introduces an analytical model to investigate the energy efficiency of the IEEE 802.11 distributed coordinated function (DCF). This model not only accounts for the number of contending nodes, the contention window, but also the packet size, and the channel condition. Based on this model, we identify the tradeoff in choosing optimum parameters to optimize the energy efficiency of DCF in the error-prone environment. The effects of contention window and packet size on the energy efficiency are examined and compared for both DCF basic scheme and DCF with four-way handshaking. The maximum energy efficiency can be obtained by combining both the optimal packet size and optimal contention window. To validate our analysis, we have done extensive simulations in ns-2, and simulation results seem to match well with the presented analytical results. The Ohio Board of Regents Doctoral Enhancements Funds and the National Science Foundation under Grant CCR 0113361 have supported this work. Xiaodong Wang received his B.S. degree in communication engineering from Beijing Information Technical Institute of China in 1995, and his M.S. degree in electric engineering from Beijing University of Aeronautics and Astronautics of China in 1998. He joined China Telecom in 1998 where he worked on communication protocols for telecommunication. From June 2000 to July 2002, he worked on GSM base station software development at Bell-labs China, Beijing, China. Currently he is a Ph.D. student in Computer Engineering at University of Cincinnati. His research activities include wireless MAC protocols, energy saving for wireless sensor networks. He is a student member of the IEEE. Jun Yin received the BS degree in automatic control from Dalian Railway Institute of China in 1997, and the MS degree in flight control from Beijing University of Aeronautics and Astronautics of China in 2001. Since 2001 she has been a Ph.D. student in the OBR Research Center for Distributed and Mobile Computing at the University of Cincinnati. Her research interests include performance evaluation of 802.11 MAC protocol, wireless ad hoc networks and sensor networks. She is a student member of the IEEE. Dharma P.Agrawal IEEE Fellow, 1987; ACM Fellow, 1998; AAAS Fellow, 2003 Dr. Agrawal is the Ohio Board of Regents Distinguished Professor of Computer Science and Computer Engineering in the department of Electrical and Computer Engineering and Computer Science, University of Cincinnati, OH. He has been a faculty member at Wayne State University, (1977–1982) and North Carolina State University (1982–1998). He has been a consultant to the General Dynamics Land Systems Division, Battelle, Inc., and the U. S. Army. He has held visiting appointment at AIRMICS, Atlanta, GA, and the AT&T Advanced Communications Laboratory, Whippany, NJ. He has published a number of papers in the areas of Parallel System Architecture, Multi computer Networks, Routing Techniques, Parallelism Detection and Scheduling Techniques, Reliability of Real-Time Distributed Systems, Modeling of C-MOS Circuits, and Computer Arithmetic. His recent research interest includes energy efficient routing, information retrieval, and secured communication in ad hoc and sensor networks, effective handoff handling and multicasting in integrated wireless networks, interference analysis in piconets and routing in scatternet, use of smart directional antennas (multibeam) for enhanced QoS, Scheduling of periodic real-time applications and automatic load balancing in heterogeneous workstation environment. He has four approved patents and three patent filings in the area of wireless cellular networks.     

Altium Designer15在电路设计的应用

在电路设计中,简单电路可以用手稿或一些办公室软件来实现,但对于复杂电路来说,则需要使用专业的EDA辅助设计软件来完成,如电路原理图(Sch)与印制电路板(PCB)文件的制作等设计工作。随着电子技术的不断创新,各种新型器件层见迭出,电路变得也越来越繁杂,传统设计方法已无法完成高密度设计要求。本文以FPGA实验教学开发板的电路进行设计为例,通过使用AltiumDesigner(以下简称AD)15这款辅助设计软件进行电路设计,不仅可以增加学生学习乐趣,还能提高动手能力,为毕业以后从事同专业工作夯实基础。     

Military multi-hop routing protocol

Military tactical network is one of the most important applications of ad hoc network. Currently the existing routing protocols are put forward based on the simple and universal network model which has the ability of multi-hop routing but cannot work efficiently in the special military applications. The narrow bandwidth and limited energy of the wireless network make general routing protocols seem to be more redundant. In order to satisfy military needs properly, this letter makes a detailed analysis of physical nodes and traffic distribution in military network, uses cross-layer design concept for reference, combines traffic characteristic of application layer with routing protocol design. It categorized routing problem as crucial routes and non-crucial routes which adopted separate maintenance methods. It not only realizes basic transmission function but also works efficiently. It is quite fit for military application.     

基于SI4432的无线通信系统设计与实现

短距离无线通信的应用已经越来越广泛,如何在保证通信质量和安全的前提下,降低系统能耗,减少硬件成本成为制约其发展的关键问题。文中采用ISM频段SI4432射频芯片和ATmega16控制单片机设计了一种新的无线通信系统,完成了系统硬件的搭建,无线通信程序及上位机界面的设计。该系统可在休眠与唤醒两种模式下工作,降低了系统整体能耗,实现了低功耗、小体积、高灵敏度的无线数据传输,可应用于工业控制、智能建筑、远程监控等多个领域,具有广阔的应用前景。     

Colloidal Synthesis of Hollow Cobalt Sulfide Nanocrystals

Formation of cobalt sulfide hollow nanocrystals through a mechanism similar to the Kirkendall Effect has been investigated in detail. It is found that performing the reaction at > 120 °C leads to fast formation of a single void inside each shell, whereas at room temperature multiple voids are formed within each shell, which can be attributed to strongly temperature‐dependent diffusivities for vacancies. The void formation process is dominated by outward diffusion of cobalt cations; still, the occurrence of significant inward transport of sulfur anions can be inferred as the final voids are smaller in diameter than the original cobalt nanocrystals. Comparison of volume distributions for initial and final nanostructures indicates excess apparent volume in shells, implying significant porosity and/or a defective structure. Indirect evidence for fracture of shells during growth at lower temperatures was observed in shell‐size statistics and transmission electron microscopy images of as‐grown shells. An idealized model of the diffusional process imposes two minimal requirements on material parameters for shell growth to be obtainable within a specific synthetic system.     

Transient thermal analysis of sapphire wafers subjected to thermal shocks

Rapid heating and cooling are commonly encountered events in integrated circuit processing, which produce thermal shocks and consequent thermal stresses in wafers. The present paper studies the heat transfer in sapphire wafers during a thermal shock as well as the dependence of the wafer temperature on various process parameters. A three-dimensional finite-element model of a single sapphire wafer was developed to analyze the transient heat conduction in conjunction with the heat radiation and heat convection on the wafer surfaces. A silicon wafer was also investigated, for comparison. It was found that the rapid thermal loading leads to a parabolic radial temperature distribution, which induces thermal stresses even if the wafer is not mechanically restrained. The study predicted that for sapphire wafers the maximum furnace temperature of 800 /spl deg/C should be held for two hours in order to get a uniform temperature throughout the wafer.     

Designing a binary controller to enhance end-to-end congestion control

Active queue management (AQM) is proposed to enhance end-to-end congestion control through purposefully dropping packets in the intermediate nodes. In this letter, a novel packet dropping mechanism is developed through designing a binary controller applying the robust control theory. The new mechanism can simplify the manipulation on the AQM router so as to be helpful for implementing the high performance router. The numerical simulation results show that the binary controller can satisfy with the technical requirements for AQM     

一种用于地面和有线接收机的宽带低噪声放大器

提出并设计了一种用于数字电视接收调谐芯片的宽带低噪声放大器.该设计采用0.35μm SiGe BiCMOS工艺,器件的主要性能为:增益等于18.8dB,增益平坦度小于1.4dB,噪声系数小于5dB,1dB压缩点为-2dBm,输入三阶交调为8dBm.在5V供电的情况下,直流功耗为120mW.