两种聚类算法的比较与实现

基于统计的系统聚类分析是一种重要的数据挖掘算法。研究了一种多重系统聚类模型及其算法实现,把变量聚类和样本聚类相结合,并使用了两种方法赋值样本数据阵,使聚类结果更加直观。     

M0内核在通用文本型HMI中的应用

采用NUC100LE3AN为主控芯片,设计了通用文本型HMI(Human Machine Interface),实现了与大部分品牌PLC的通信连接。介绍了该装置的构架原理、功能及其软硬件设计思想。详细讨论了FLASH存储器空间分配、APROM区与LDROM相互跳转原理、以及应用程序区任务模块的组织形式等。最后通过与信捷XC1-32型PLC连接,进行了功能测试,结果表明设计满足了功能需求。     

“技能-能力-思维”三层次大学计算机基础教学

当前因受“狭议工具论”错误认识的影响致使非计算机专业大学计算机基础教育受到冲击,计算机基础课程的学时也被缩减.针对这一问题,提出了以计算思维培养为核心,“技能-能力-计算思维”三层次培养目标的教学改革.对课程内容进行了面向知识能力、计算思维教学的内容重构与组织,给出了具体的教学内容模块,同时探讨了计算思维培养教学方法.     

Collision and intersection detection of two ruled surfaces using bracket method

Collision and intersection detection of surfaces is an important problem in computer graphics and robotic engineering. A key idea of our paper is to use the bracket method to derive the necessary and sufficient conditions for the collision of two ruled surfaces. Then the numerical intersection curve can be characterized. The cases for two bounded ruled surfaces are also discussed.     

Real time 3D simulation for nose surgery and automatic individual prosthesis design

This paper presents an intuitive nose surgery planning and simulation system, using 3D laser scan image and lateral X-ray image, to provide high quality prediction of the postoperative appearance, and design the patient specific prosthesis model automatically. After initial registration, the internal surface of soft tissue at the nose region was generated by the statistical data for soft tissue thickness adapted by the individual thickness information from the X-ray image. Then, the sketch contour of the 3D scan data on the lateral X-ray image was modified manually or adjusted automatically according to some aesthetic statistical data, to drive the simulation in real time by the state-of-the-art Laplacian surface deformation method. When satisfied with the 3D postoperative appearance, the deformation was mapped to the internal surface of soft tissue, and the change before and after simulation was utilized to generate the patient specific prosthesis model automatically. The surgeons who used the system confirmed that this planning system is attractive and has potential for daily clinical practice.     

化学因子分析法测定液体推进剂A

基于测定推进剂Ａ现有分析方法准确度低,神经网络法对仪器要求高等不足,提出了的一种新的分析方法。该方法利用已知酸的电位滴定数据建立多元线性回归数学模型,利用化学因子分解该模型,对未知样进行浓度测定。实际测定结果表明本方法的最大分析误差不超过０．１７％,标准偏差不超过１．９％,满足样品分析要求。     

健壮性学习算法

使用统计方法可以对汉英机器翻译的词性标注和句法语义分析阶段产生的歧义进行消歧,在估计过程中往往使用最大可能方法,但是并不是在所有的情况下取最大值都是正确的。为了从所有候选结果中取到正确的结果,本文使用健壮性学习算法。使用这个算法,当正确的候选结果评分不是最高时,仍能通过健壮性算法来调整正确结果的评分,使之最大,并且降低不正确候选的评分。而且,由于训练集与测试集存在不同,使训练集中的错误率最小不能保证测试集中的错误率也最小。因此当考虑训练语料库和测试语料库存在统计变化时,应该使用健壮性学习算法。     

Performance evaluation of a dental handpiece in simulation of clinical finishing using a novel 2DOF in vitro apparatus

This paper reports on the performance evaluation of a dental handpiece in simulation of clinical finishing using a novel two-degrees-of-freedom (2DOF) in vitro apparatus. The instrumented apparatus consisted of a two-dimensional computer-controlled coordinate worktable carrying a dental handpiece, a piezoelectric force dynamometer, and a high-speed data acquisition and signal conditioning system for simulating the clinical operations and monitoring the dental finishing processes. The performance of the dental handpiece was experimentally evaluated with respect to rotational speed, torque, and specific finishing energy under the applied clinical finishing conditions. The results show that the rotational speeds of the dental handpiece decreased by increasing either the depth of cut or the feed rate at a constant clinically applied air pressure and water flowrate. They also decreased when increasing both the tangential and normal finishing forces. The specific finishing energy decreased with an increase in either depth of cut or feed rate, while the finishing torque increased as either the depth of cut or the feed rate was increased. Implications of these results were to provide guidance for proper applications of dental handpieces in clinical practice.     

动态地构建和维护基于小波的直方图*

利用小波变换的数学理论和方法,对基本的数据分布进行小波分解,在此基础上采用一种新的方法来动态地构建和维护基于小波的直方图,并给出相应的算法。实验证明基于这种方法的小波直方图能提供好的选择性估算和近似技术。     

电炉法CS_2废气的治理

简介了电炉法CS2 废气吸附的原理及工艺流程 ,开辟了H2 S利用的新途径 ,具有较好的环境效益和经济效益