共面转换液晶显示器中获得对比度高于1:600的新技术

薄膜晶体管液晶电视(TFT-LCD TV)因为具有薄、轻、紧凑和可随意放置的特点，已经占据了大部分电视机市场。除了这些物理特性以外，最重要的特性是已具有了良好像质的对比度。为了将对比度提高到1：600以上，对偏振片膜、背光源板、滤色片树脂、电极锥角和摩擦条件等都进行了研究。优化的背光板组合，光滑的电极锥角和摩擦方法的控制是提高对比度的主要控制因素。应用新开发的滤色片树脂，对获得高对比度最为有效。     

Error Concealment Based on Semantic Prioritization with Hardware‐Based Face Tracking

With video compression standards such as MPEG‐4, a transmission error happens in a video‐packet basis, rather than in a macroblock basis. In this context, we propose a semantic error prioritization method that determines the size of a video packet based on the importance of its contents. A video packet length is made to be short for an important area such as a facial area in order to reduce the possibility of error accumulation. To facilitate the semantic error prioritization, an efficient hardware algorithm for face tracking is proposed. The increase of hardware complexity is minimal because a motion estimation engine is efficiently re‐used for face tracking. Experimental results demonstrate that the facial area is well protected with the proposed scheme.     

疏水缔合型聚丙烯酰胺的合成与性能评价

为了提高高相对分子质量的聚丙烯酰胺的抗温抗盐性能,利用自制的两亲表面活性单体与丙烯酰胺共聚合成了疏水缔合型聚丙烯酰胺并进行室内评价。结果表明,在高温、高盐、高钙条件下,合成的疏水缔合型聚丙烯酰胺具有良好的增粘性和较强的热稳定性;克服了疏水缔合型聚合物在盐水中溶解性差的问题,可用各种矿化度的盐水和油田产出污水配制;具有良好的无机盐增粘性能和抗温性能。     

拉西瓦高拱坝岩体力学、工程地质研究成果综述

拉西瓦水电站高拱坝建基岩体工程地质、岩体力学研究是中国水电顾问集团2004年度专题科研成果之一“高混凝土拱坝建基岩体工程地质、岩体力学综合研究”的主要成果,其重点内容为岩体风化、卸荷、岩体质量级别的定量划分、河谷应力场分带、建基岩体主要岩体力学参数研究,坝肩抗滑稳定、开挖后综合检测验证等;在理论探讨、方法实践、预测验证和创新尝试等方面取得了一定成果,具有一定的社会、经济效益。     

Real-time homogenous translucent material editing

This paper presents a novel method for real-time homogenous translucent material editing under fixed illumination. We consider the complete analytic BSSRDF model proposed by Jensen et al. [ [JMLH01] ], including both multiple scattering and single scattering. Our method allows the user to adjust the analytic parameters of BSSRDF and provides high-quality, real-time rendering feedback. Inspired by recently developed Precomputed Radiance Transfer (PRT) techniques, we approximate both the multiple scattering diffuse reflectance function and the single scattering exponential attenuation function in the analytic model using basis functions, so that re-computing the outgoing radiance at each vertex as parameters change reduces to simple dot products. In addition, using a non-uniform piecewise polynomial basis, we are able to achieve smaller approximation error than using bases adopted in previous PRT-based works, such as spherical harmonics and wavelets. Using hardware acceleration, we demonstrate that our system generates images comparable to [ [JMLH01] ]at real-time frame-rates.     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

Preparations of nanosized TiO2 in reverse microemulsion and their photocatalytic activity

Nanosized titania sol has been produced by the controlled hydrolysis of titanium tetraisopropoxide (TTIP) in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles. The physical properties, such as surface area, crystallite size and crystallinity according to R and W₀ ratio, have been investigated by TEM, XRD, BET, FT–IR, TGA and DTA. In addition, the photocatalytic decomposition of p-nitrophenol has been studied by using a batch reactor in the presence of UV light in order to compare the photocatalytic activity of prepared nanosized titania. It is shown that the anatase structure appears in the 300–600 °C calcination temperature range and the transformation of anatase into rutile starts above 700 °C. The crystallite size increases with increasing R and W₀ ratio but W₀ ratio shows a stronger effect on the crystallite size than R ratio. In the photocatalytic decomposition of p-nitrophenol, the photocatalytic activity is mainly determined by the crystallinity of titania. In addition, the titania calcined at 500 °C shows the highest activity on the photocatalytic decomposition of p-nitrophenol() and the pure anatase structure.     

带有弯曲静子的压气机数值仿真

针对某两级低速轴流压气机第一级静子通道小流量范围内存在轮毂-角区失速现象,为了提高压气机的效率,采用计算流体力学方法,对第一级静子进行了不同的弯曲变化数值仿真,分析研究了静子弯曲对压气机性能和轮毂-角区失速的影响。结果表明,弯曲叶片能够通过改变静子轮毂表面静压分布,减缓低能流体的横向流动,从而有效地抑制小流量范围内的轮毂-角区失速,压气机的压比和效率得到较大的提升。     

云关系模式及其应用*

在云变换的基础上,结合非经典关系数据库理论提出了云关系模式,给出了云关系模式的定义,探讨了云关系模式的意义,并将它应用于学生成绩数据库中,改进了目前学生定性评定方法,克服了其中的主观因素,实例证明该方法具有可行性.     

含硫氰酸盐、硫化物固体废物中总氰化合物测定方法

实验建立了含硫氰酸盐、硫化物固体废物中总氰化合物的测定方法,采用硝酸银滴定法、异烟酸-吡唑啉酮分光光度法分别测定总氰化合物含量高、低的样品。通过条件实验优化了前处理方式、称样量和干扰去除方法。该方法测定结果的相对标准偏差为0.43%～1.33%,加入标准物质回收率为91.5%～101.5%,精密度和准确度良好,符合测定要求。